Search for Volkswagen Transporter T5 Van (7HA, 7HH, 7EA, 7EH) Clutch kit:
VW T5 Clutch kit
Clutch car spares Volkswagen Transporter V Van 7HA, 7HH, 7EA, 7EH
- VW Transporter V Van (7HA, 7HH, 7EA, 7EH) Flywheel
- VW Transporter T5 Van (7HA, 7HH, 7EA, 7EH) Clutch master cylinder
- VW Transporter 5 (7HA, 7HH, 7EA, 7EH) Clutch slave cylinder
- VW T5 Gear selector cable
More
Best goods: Clutch kit VW T5
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 22,1 x 20,3
- Weight [kg]: 15,6
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 6
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 15
- Number of mounting bores: 8
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT3P
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Special tools for mounting not necessary
- New Part
- Hub Profile: 22,2 x 20,3
- Weight [kg]: 4,93, 5,07
- Clutch: for vehicles with push type clutch
- for flywheel manufacturer: LUK
- for flywheel depth [mm]: 17,6
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 240
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch slave cylinder, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 230
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Hub Profile: 20,4x22,2-28N
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT3P (CSC)
- Number of Teeth: 26
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 26,4 x 28,6
- Weight [kg]: 6,58
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT2P
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 26,4 x 28,6
- Weight [kg]: 5,6
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 26
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 17,84
- Mounting Type: Crimped
- Number of mounting bores: 6
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with flywheel screws, with central slave cylinder
- New Part
- Weight [kg]: 17,8
- Mounting Type: Crimped
- Number of mounting bores: 6
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Weight [kg]: 5,73
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 229
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: three-piece
- for OE number: 03L 141 015 N
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Hub Profile: 20.3x22.1
- Multi-piece: three-piece
- Adjustment: without automatic adjustment
- Clutch Pressure Plate Outer Diameter [mm]: 230
- Friction Lining Outer Diameter 1 [mm]: 230
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 26
- Alternative Repair Kit: 3000 951 649
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 241
- Number of Teeth: 26
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 26
- Supplementary Article / Supplementary Info: with central slave cylinder
- Hub Profile: 26.6x28.9
- Multi-piece: three-piece
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Friction Lining Outer Diameter 1 [mm]: 240
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
