Search for Skoda Superb II Hatchback (3T4) Clutch kit:
Skoda Superb 3t Clutch kit
Clutch car spares Skoda SUPERB 3T4
- SKODA SUPERB (3T4) Flywheel
- SKODA Superb II Hatchback (3T4) Clutch master cylinder
- Skoda Superb 3t Clutch slave cylinder
- SKODA SUPERB (3T4) Gear selector cable
More
Best goods: Clutch kit Skoda Superb 3t
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Observe broschure
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 228
- Number of Teeth: 28
- for components see parts list
- Engine Features/Arrangement: for engines without dual-mass flywheel
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: XTend
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Hub Profile: 20,3x22,1-28N
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate
- New Part
- Hub Profile: 22,1 x 20,3
- Weight [kg]: 15,6
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Hub Profile: 23 x 20
- Weight [kg]: 4,72
- Clutch: for vehicles with push type clutch
- for flywheel manufacturer: LUK
- for flywheel depth [mm]: 17,6
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: KIT3P (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 6,19
- for flywheel manufacturer: LUK
- Bore Diameter [mm]: 31
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: KIT3P (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 6,45
- for flywheel manufacturer: SACHS
- Clutch Pressure Plate Outer Diameter [mm]: 241
- Number of mounting bores at central slave cylinder: 3
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: SERVICE KIT3P for CONVERSION KIT
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, without flywheel
- New Part
- Weight [kg]: 5,97
- Clutch: for vehicles with push type clutch
- only in connection with: 835035
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: XTend Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Hub Profile: 21,8x24,3-23N
- Alternative Repair Kit: 3000 970 004
- only to be used within set
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- New Part
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Extention Force [N]: 7200
- for flywheel manufacturer: SACHS
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 21,8x24,3-23N
- Observe service information
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: XTend Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Hub Profile: 21,8x24,3-23N
- Alternative Repair Kit: 3000 970 047
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate
- New Part
- Hub Profile: 22,2 x 20,3
- Control Type: Push control
- Extention Force [N]: 5250
- for flywheel manufacturer: SACHS
- for flywheel depth [mm]: 11,6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 240
- Number of Teeth: 23
- Hub Profile: 24,2x21,8
- Extention Force [N]: 7200
- Outer Diameter 2 [mm]: 240
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
