Search for Skoda Octavia IV Saloon (NX3) Clutch kit:
SKODA Octavia IV Saloon (NX3) Clutch kit
Clutch car spares Skoda Octavia IV Saloon NX3
- SKODA Octavia IV Saloon (NX3) Flywheel
- Octavia IV Saloon (NX3) Clutch master cylinder
- SKODA Octavia IV Saloon (NX3) Clutch slave cylinder
- Octavia IV Saloon (NX3) Gear selector cable
More
Best goods: Clutch kit SKODA Octavia IV Saloon (NX3)
incl. 20% VAT, free delivery
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Clutch Type: for wet clutch
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT2P
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 5,52
- Clutch: for vehicles with push type clutch
- for flywheel manufacturer: LUK
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- for OE number: 04L 141 015 S1
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: XTend
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Hub Profile: 20,3x22,10-28N
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Observe service information
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Observe service information
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Weight [kg]: 4,91, 5,84
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- New Part
- Weight [kg]: 7,08
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
LuK 624 4128 09 Clutch kit
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Condition: New
Over 100 in stock
KAMOKA KC801 Clutch kit
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork
- Transmission Type: Dual-Clutch Transmission
- Clutch Type: for dry clutch
- Condition: New
Over 100 in stock
SACHS 3000 970 154 Clutch kit
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Observe service information
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 230
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- New Part
- Weight [kg]: 13,97
- Clutch: for vehicles with double clutch
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing, with release fork, Requires special tools for mounting
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Transmission Type: Dual-Clutch Transmission
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 18
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with lock screw set, with clutch release bearing, Requires special tools for mounting
- Supplementary Article / Supplementary Info: with single-mass flywheel, with flywheel screws
- New Part
- Hub Profile: 22,1 x 20,3
- Weight [kg]: 15,02
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- for flywheel manufacturer: LUK
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: Performance
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with single-mass flywheel, with pressure plate screws, for use in motor sport
- Hub Profile: 21,8 x 24,2 - 23
- Clutch: for vehicles with single disc clutch
- Mounting Type: not pre-mounted
- Max. transferable engine torque [Nm]: 530
- Clutch Type: clutch disc with torsion springs with org. surfaces
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul
- Diameter [mm]: 228
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: RepSet
- Diameter [mm]: 200
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, with guide sleeve
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul
- Diameter [mm]: 228
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: DMF Module plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- for components see parts list
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: FULLPACK DMF
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 15,03
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
