Search for Peugeot 3008 (T8) Clutch kit:
PEUGEOT 3008 (T8) Clutch kit
Clutch car spares Peugeot 3008 T8
- PEUGEOT 3008 (T8) Flywheel
- 3008 (T8) Clutch master cylinder
- PEUGEOT 3008 (T8) Clutch slave cylinder
- 3008 (T8) Gear selector cable
More
Best goods: Clutch kit PEUGEOT 3008 (T8)
incl. 20% VAT, excl. delivery costs
- Product line: KIT2P
- Number of Teeth: 18
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- New Part
- Hub Profile: 20,9 x 18,2
- Weight [kg]: 4,13
- Clutch Pressure Plate Outer Diameter [mm]: 229
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 228
- Number of Teeth: 18
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Weight [kg]: 4,528
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: SAC
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 18
- Supplementary Article / Supplementary Info: without central slave cylinder, with clutch pressure plate
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 20
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 24
- Tightening Torque [Nm]: 60
- Number of mounting bores at central slave cylinder: 3
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 18
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 18,32
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 7
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor, Bolted connection cable
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 21
- Number of mounting bores: 8
- Tightening Torque [Nm]: 60
- Clutch Pressure Plate Outer Diameter [mm]: 250
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 19,49
- for flywheel manufacturer: LUK
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 50
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 21,32, 20,99
- Number of mounting bores: 8
- Tightening Torque [Nm]: 60
- Clutch Pressure Plate Outer Diameter [mm]: 250
- Material: Aluminium
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 18
- for components see parts list
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of Teeth: 18
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- New Part
- Hub Profile: 21 x 18
- Weight [kg]: 7,29, 6,1
- for flywheel manufacturer: VALEO
- Clutch Pressure Plate Outer Diameter [mm]: 235
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT2P
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 22,5 x 20,15
- Weight [kg]: 5,35, 5,46
- Clutch: for vehicles with push type clutch
- for flywheel manufacturer: VALEO
- Clutch Pressure Plate Outer Diameter [mm]: 235
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 21
- Hub Profile: 21,5x24,6-21N
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 18
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- for components see parts list
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 26
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,31
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 228
- Number of Teeth: 18
- Alternative Repair Kit: 3000 950 062
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: KIT2P
- Number of Teeth: 21
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, Special tools for mounting not necessary
- New Part
- Hub Profile: 25 x 21,5
- Weight [kg]: 6,55, 6,62
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 250
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 18
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,41
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Number of mounting bores at central slave cylinder: 2
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 236
- Number of Teeth: 18
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: three-piece
- Weight [kg]: 5,840
- Observe service information
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
