Search for Jaguar E-Type Convertible Clutch kit:
JAGUAR E-Type Convertible Clutch kit
Clutch car spares Jaguar E-TYPE Convertible
- JAGUAR E-TYPE Convertible Clutch master cylinder
- JAGUAR E-Type Convertible Clutch slave cylinder
- E-Type Convertible Clutch plate
- JAGUAR E-TYPE Convertible Clutch pressure plate
More
Best goods: Clutch kit JAGUAR E-Type Convertible
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 14
- Number of mounting bores: 8
- Condition: New
Over 100 in stock
-57%
compared to RRP:
£221,99
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Weight [kg]: 5,240
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: KIT4P - CONVERSION KIT (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with single-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 17,95, 17,44
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Tightening Torque [Nm]: 100
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 260
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
-55%
compared to RRP:
£666,04
incl. 20% VAT, free delivery
- Product line: XTend Kit plus CSC
- Diameter [mm]: 250
- Number of Teeth: 23
- Alternative Repair Kit: 3000 970 115
- Condition: New
Over 100 in stock
-57%
compared to RRP:
£210,99
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Weight [kg]: 5,528
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc, with screw set
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 23x26 - 23N
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Equipment: flywheel
- Condition: New
Over 100 in stock
-63%
compared to RRP:
£495,56
incl. 20% VAT, free delivery
- Product line: XTend Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Hub Profile: 23,1x26,1-23N
- Alternative Repair Kit: 3000 970 052
- only available in set
- Condition: New
Over 100 in stock
-69%
compared to RRP:
£449,90
incl. 20% VAT, excl. delivery costs
- Product line: XTend Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 23
- Hub Profile: 23,1x26,1-23N
- Alternative Repair Kit: 3000 970 052
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: KIT2P
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 26,1 x 23,1
- Weight [kg]: 5,94
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
NEXUS F1G147NX Clutch kit
incl. 20% VAT, free delivery
- Diameter [mm]: 239
- Number of Teeth: 23
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
-50%
compared to RRP:
£345,20
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set
- Supplementary Article / Supplementary Info: without central slave cylinder
- Hub Profile: 23.3x26.3
- Multi-piece: three-piece
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Friction Lining Outer Diameter 1 [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, Requires special tools for mounting, with clutch disc, with screw set
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- Hub Profile: 23.3x26.3
- Multi-piece: three-piece
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Friction Lining Outer Diameter 1 [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 14
- Number of mounting bores: 8
- Condition: New
Over 100 in stock
-70%
compared to RRP:
£582,09
incl. 20% VAT, free delivery
- Product line: XTend
- Diameter [mm]: 250
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Observe service information
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
