Search for Ford Transit Connect Mk3 MPV Clutch kit:
FORD Transit Connect Mk3 MPV Clutch kit
Clutch car spares Ford Transit Connect Mk3 MPV
More
Best goods: Clutch kit FORD Transit Connect Mk3 MPV
incl. 20% VAT, free delivery
- Number of Teeth: 6
- Supplementary Article / Supplementary Info Info 2: with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: with central slave cylinder, with pilot bearing
- Adjustment: with automatic adjustment
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 19
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 19,8
- Mounting Type: Crimped
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 31
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Number of mounting bores at central slave cylinder: 3
- Material: Plastic
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: XTend Kit plus CSC
- Diameter [mm]: 240
- Number of Teeth: 20
- Alternative Repair Kit: 3000 970 113
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Observe service information
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: without central slave cylinder
- Hub Profile: 23x26
- Multi-piece: two-piece
- Clutch Pressure Plate Outer Diameter [mm]: 235
- Friction Lining Outer Diameter 1 [mm]: 235
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info Info 2: with flywheel, with clutch disc
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Hub Profile: 23x26-23N
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Equipment: CSC+flywheel
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 236
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 230
- Number of Teeth: 23
- Clutch: for vehicles with hydraulic clutch control
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 228
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 228
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with bolts/screws, with flywheel
- Supplementary Article / Supplementary Info: with synthetic grease, with central slave cylinder
- Multi-piece: four-piece
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: KIT4P - CONVERSION KIT
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with lock screw set
- Supplementary Article / Supplementary Info: with single-mass flywheel, without central slave cylinder
- New Part
- Hub Profile: 23,2 x 20,1
- Weight [kg]: 20,17
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 30
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: KIT2P
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Hub Profile: 26,108 x 23,103
- Engine Features/Arrangement: for engines without dual-mass flywheel
- Weight [kg]: 6,27
- Clutch: for vehicles with push type clutch
- Clutch Pressure Plate Outer Diameter [mm]: 235
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 235
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 23,1x26,1-23N
- Multi-piece: two-piece
- Used part return not required
- New part without deposit
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with release plate, with clutch disc
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Equipment: cover, disc
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: KIT3P (CSC)
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Hub Profile: 26 x 23
- Weight [kg]: 5,47
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 241
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: with central slave cylinder
- Hub Profile: 20.2x23.2
- Multi-piece: three-piece
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Friction Lining Outer Diameter 1 [mm]: 240
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
