Search for Audi A4 B9 Saloon (8W2, 8WC) Clutch kit:
Audi A4 B9 Saloon Clutch kit
Clutch car spares Audi A4 B9 Saloon 8W2, 8WC
- AUDI A4 B9 Saloon (8W2, 8WC) Flywheel
- Audi A4 B9 Saloon Clutch master cylinder
- AUDI A4 B9 Saloon (8W2, 8WC) Clutch slave cylinder
- Audi A4 B9 Saloon Clutch plate
More
Best goods: Clutch kit Audi A4 B9 Saloon
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 240
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Diameter [mm]: 240
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
LuK 624 4106 33 Clutch kit
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Condition: New
Over 100 in stock
BorgWarner 203769 Clutch kit
incl. 20% VAT, free delivery
- Transmission Code: DQ381
- Clutch: for vehicles with double disc clutch
- Max. transferable engine torque [Nm]: 420
- Number of Gears: 7 Speed
- Clutch Type: for wet clutch
- Quality: OE-Version/Genuine
- Fitting Position: Transverse
- Pin Height [mm]: 22,9
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Observe service information
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Multi-piece: two-piece
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with mounting tool, with pilot bearing
- Adjustment: with automatic adjustment
- Number of mounting bores: 3
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend
- Diameter [mm]: 240
- Number of Teeth: 28
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with mounting tool, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws
- Additionally required articles (article numbers): 1874 000 076
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 16
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel without friction control plate
- Supplementary Article / Supplementary Info: with mounting tool, with pilot bearing
- Adjustment: with automatic adjustment
- Number of mounting bores: 3
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul
- Diameter [mm]: 228
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: KIT4P - CONVERSION KIT
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing
- Supplementary Article / Supplementary Info: with single-mass flywheel
- New Part
- Hub Profile: 24,2 x 21,8
- Weight [kg]: 16,85
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 90
- Clutch Pressure Plate Outer Diameter [mm]: 229
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with clutch disc, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet DMF
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with flywheel, with screw set, Requires special tools for mounting, Dual-mass flywheel with friction control plate
- Supplementary Article / Supplementary Info: without pilot bearing
- Adjustment: with automatic adjustment
- Number of teeth (finding the max. clearance angle): 5
- max. side clearance [mm]: 2,9
- Max. Clearance Angle [Degree]: 16
- Number of mounting bores: 6
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Hub Profile: 21,9x24,3-23N
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 228
- Number of Teeth: 23
- for components see parts list
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: ZMS Modul XTend
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Product line: RepSet
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, Check and replace dual-mass flywheel if necessary.
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Product line: FULLPACK DMF
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, with clutch release bearing, Special tools for mounting not necessary
- Supplementary Article / Supplementary Info: with dual-mass flywheel
- New Part
- Weight [kg]: 18,04
- Number of mounting bores: 6
- only to be used within set
- Tightening Torque [Nm]: 60
- Tightening angle [degrees]: 50
- only available in set
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Info: SAC
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with screw set, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with mounting tool
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery
