Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Octavia 5e5 1.6 110 hp Petrol
- Brake pads Octavia 5e5 1.6 110 hp Petrol
- Brake caliper Octavia 5e5 1.6 110 hp Petrol
- ABS sensor Octavia 5e5 1.6 110 hp Petrol
- Brake caliper repair kit Octavia 5e5 1.6 110 hp Petrol
- Handbrake Octavia 5e5 1.6 110 hp Petrol
- Brake disc back plate Octavia 5e5 1.6 110 hp Petrol
- Brake pad wear sensor Octavia 5e5 1.6 110 hp Petrol
- Brake caliper carrier Octavia 5e5 1.6 110 hp Petrol
- Master cylinder Octavia 5e5 1.6 110 hp Petrol
- Brake hose OCTAVIA 1.6 110 hp Petrol
- Handbrake cable OCTAVIA 1.6 110 hp Petrol
- Guide sleeve kit, brake caliper OCTAVIA 1.6 110 hp Petrol
- Brake fluid OCTAVIA 1.6 110 hp Petrol
- Brake pad fitting kit OCTAVIA 1.6 110 hp Petrol
- Brake servo OCTAVIA 1.6 110 hp Petrol
- Wheel cylinder OCTAVIA 1.6 110 hp Petrol
- Brake pads and discs OCTAVIA 1.6 110 hp Petrol
- Brake light switch OCTAVIA 1.6 110 hp Petrol
- Abs ring OCTAVIA 1.6 110 hp Petrol
- Brake caliper piston OCTAVIA 1.6 110 hp Petrol
- Brake disc bolts OCTAVIA 1.6 110 hp Petrol
- Handbrake switch OCTAVIA 1.6 110 hp Petrol
- Performance brake discs OCTAVIA 1.6 110 hp Petrol
- High-performance brake pads OCTAVIA 1.6 110 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Octavia 5e5 1.6 110 hp Petrol

Article №: 82B0018
Details
-
- for PR number: 1KD
- Fitting Position: Rear Axle
- Fitting Position: Rear Axle
- Diameter [mm]: 253
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140
- Height [mm]: 51,3
- Surface: Uncoated
- Material: Cast Iron
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-56%
compared to RRP:
£ 29,90
£ 13,15
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B0028
Details
- for PR number: 1ZE, 1ZJ
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 24,9
- Minimum thickness [mm]: 22,0
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 144
- Height [mm]: 49,6
- Surface: Uncoated
- Machining: High-carbon
- Material: Cast Iron
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-63%
compared to RRP:
£ 54,80
£ 20,20
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B0342
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KT, 1KS
- Fitting Position: Rear Axle
- Diameter [mm]: 271,8
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 149
- Height [mm]: 48,3
- Surface: Uncoated
- Tightening Torque [Nm]: 120
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-45%
compared to RRP:
£ 38,70
£ 21,14
incl. 20% VAT, excl. delivery costs
In stock
Details


Article №: 82B2566
Details
-
- for PR number: 1KD
- Construction Year from: 02/2017
- Model Year from: 2018
- Fitting Position: Rear Axle
- Diameter [mm]: 253
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/10
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height [mm]: 61,5
- Weight [kg]: 3,6
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs, with bolts/screws
- Drilled: no
- Condition: New
More
£ 24,43
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B0031
Details
-
- for PR number: 1ZA, 1ZB, 1ZK, 1ZU
- Fitting Position: Front Axle
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 25,1
- Minimum thickness [mm]: 22,0
- Centering Diameter [mm]: 65,1
- Inner Diameter [mm]: 146,1
- Height [mm]: 49,5
- Surface: Uncoated
- No. of holes 2: 9
- Material: Cast Iron
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-60%
compared to RRP:
£ 64,50
£ 25,37
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B0364
Details
- for PR number: 1KW
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22,1
- Minimum thickness [mm]: 20,0
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 168,8
- Height [mm]: 48,3
- Surface: Uncoated
- Machining: High-carbon
- No. of holes 2: 9
- Material: Cast Iron
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-48%
compared to RRP:
£ 53,70
£ 27,72
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B0828
Details
- for PR number: 1LG
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27,0
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 145
- Height [mm]: 49,7
- Surface: Uncoated
- Machining: High-carbon
- Material: Cast Iron
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-51%
compared to RRP:
£ 108,80
£ 53,10
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKGE-2017
Details
-
- for PR number: 1KD
- Fitting Position: Rear Axle
- Fitting Position: Rear Axle
- Diameter [mm]: 253
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,9
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140
- Height [mm]: 51,3
- Surface: Uncoated
- Material: Cast Iron
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-56%
compared to RRP:
£ 29,90
£ 13,15
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: A1003P
Details
-
- Construction Year to: 12/2016
- Fitting Position: Rear Axle
- for PR number: 1KD
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Brake System: TRW
- Height [mm]: 51,3
- Drilled: no
- Condition: New
More
£ 16,91
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 23240
Details
-
- Vehicle Identification Number (VIN) to: ******5E*8J006445
- for PR number: 1KD
- Fitting Position: Rear Axle
- Diameter [mm]: 255
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 51,2
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Weight [kg]: 3,52
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
-58%
compared to RRP:
£ 43,98
£ 18,32
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 17520
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KD
- not for facelift
- Product line: COATED
- Diameter [mm]: 253
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Hub Diameter [mm]: 150
- Height [mm]: 51,3
- Weight [kg]: 3,5
- Surface: Coated
- Drilled: no
- Condition: New
More
-59%
compared to RRP:
£ 48,29
£ 19,73
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: SKBD-0020347
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KT, 1KS
- Fitting Position: Rear Axle
- Diameter [mm]: 271,8
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 149
- Height [mm]: 48,3
- Surface: Uncoated
- Tightening Torque [Nm]: 120
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-45%
compared to RRP:
£ 38,70
£ 21,14
incl. 20% VAT, excl. delivery costs
In stock
Details


Article №: 82B0018P
Details
-
- for PR number: 1KD
- Fitting Position: Rear Axle
- Fitting Position: Rear Axle
- Diameter [mm]: 253
- Brake Disc Type: solid
- Number of Holes: 5/10
- Wheel Bolt Bore Diameter [mm]: 15.1
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9.9
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140
- Height [mm]: 51.3
- Surface: Coated
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-61%
compared to RRP:
£ 55,97
£ 21,58
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: A1003P
Details
-
- Construction Year to: 12/2016
- Fitting Position: Rear Axle
- for PR number: 1KD
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Brake System: TRW
- Height [mm]: 51,3
- Drilled: no
- Condition: New
More
£ 22,08
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 82B0342P
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KT, 1KS
- Fitting Position: Rear Axle
- Diameter [mm]: 271,8
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height [mm]: 48
- Surface: Coated
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- usable for vehicles to construction year: 2016/11
- Condition: New
More
-61%
compared to RRP:
£ 64,35
£ 24,54
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: PB 1915C
Details
- for PR number: 1KS, 1KT
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Surface: Painted
- Overall Height [mm]: 48,2
- Condition: New
More
£ 24,90
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 19-0839
Details
-
- for PR number: 1KD
- Model Year to: 2017
- Fitting Position: Rear Axle
- Diameter [mm]: 253
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Height [mm]: 51
- Surface: Painted
- Test Mark: E1 90R 02 C0190/0016
- Drilled: no
- Condition: New
More
£ 25,84
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: A1003PR
Details
-
- Construction Year to: 12/2016
- Fitting Position: Rear Axle
- for PR number: 1KD
- Diameter [mm]: 253
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Brake System: TRW
- Height [mm]: 51,3
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 25,84
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 19-2018
Details
- for PR number: 1KS, 1KT
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Height [mm]: 48,3
- Surface: Coated, Oiled
- Test Mark: E1 90R 02 C0190/0261
- Drilled: no
- Condition: New
More
£ 28,19
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 19-0839MAX
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KD
- Model Year to: 2017
- Diameter [mm]: 253
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Height [mm]: 51
- Weight [kg]: 3,5
- Surface: Painted
- Test Mark: E1 90R 02 C0190/0016
- Drilled: no
- Condition: New
More
£ 28,66
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 24011002771-PCS-MS
Details
- for PR number: 1KD
- Fitting Position: Rear Axle
- Diameter [mm]: 253
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140
- Height [mm]: 51,6
- Required quantity: 2
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Net weight [kg]: 3,54
- Gross Weight [kg]: 3,85
- Drilled: no
- Condition: New
More
-5%
compared to RRP:
£ 30,29
£ 28,66
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: B130260
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KD
- Diameter [mm]: 253
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 140,0
- Height [mm]: 51,6
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Condition: New
More
£ 29,60
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: 6649.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 254,7, 255
- Brake Disc Type: solid
- Number of Holes: 9
- Brake Disc Thickness [mm]: 9,9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Height [mm]: 51,2
- Weight [kg]: 3,54
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£ 30,07
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: B130295
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KS, 1KT
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,7
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 174,5
- Height [mm]: 48,2
- Bore Diameter [mm]: 15,3
- Drilled: no
- Condition: New
More
£ 34,30
incl. 20% VAT, excl. delivery costs
In stock
Details

Article №: LVBE385
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KD
- Diameter [mm]: 253
- Brake Disc Type: solid
- Number of Holes: 5
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 9,9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Height [mm]: 51,3
- Weight [kg]: 3,8
- Surface: Coated
- Condition: New
More
£ 34,30
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 300 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- ...
- 11
- 12