Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Skoda Octavia 1u 1.6 75 hp Petrol
- Ignition coil Skoda Octavia 1u 1.6 75 hp Petrol
- Glow plug control module Skoda Octavia 1u 1.6 75 hp Petrol
- Ignition leads Skoda Octavia 1u 1.6 75 hp Petrol
- Camshaft sensor Skoda Octavia 1u 1.6 75 hp Petrol
- Crankshaft sensor Skoda Octavia 1u 1.6 75 hp Petrol
- Distributor cap Skoda Octavia 1u 1.6 75 hp Petrol
- Timing cover gasket Skoda Octavia 1u 1.6 75 hp Petrol
- Knock sensor Skoda Octavia 1u 1.6 75 hp Petrol
- Distributor rotor Skoda Octavia 1u 1.6 75 hp Petrol
- Distributor and parts OCTAVIA 1.6 75 hp Petrol
- Ignition module OCTAVIA 1.6 75 hp Petrol
- Plug, spark plug OCTAVIA 1.6 75 hp Petrol
- Engine control unit (ECU) OCTAVIA 1.6 75 hp Petrol
- Repair kit, distributor OCTAVIA 1.6 75 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs Skoda Octavia 1u 1.6 75 hp Petrol
Article №: 686S0012
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0512
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 3 - Earthed Electrode, with resistor, Connector Type SAE
- Thread Size: M14
- Supplementary Article / Supplementary Info Info 2: with flat seat
- TecDoc Engine Number: AEE
- Condition: New
More
£ 2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0035
Details
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- TecDoc Engine Number: AEE
- Condition: New
More
£ 3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0319
Details
- External Thread [mm]: 14,0
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- TecDoc Engine Number: AEE
- Condition: New
More
£ 15,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-19990510
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 3 - Earthed Electrode, with resistor, Connector Type SAE
- Thread Size: M14
- Supplementary Article / Supplementary Info Info 2: with flat seat
- TecDoc Engine Number: AEE
- Condition: New
More
£ 1,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990136
Details
-
- Engine Code: AEE
- Fuel Type: CNG/LPG
- Required quantity: 4
- Product line: Iridium TT
- Thread Length [mm]: 19
- Spanner Size: 20.6
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode
- Thread Size: M14x1.25
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Condition: New
More
£ 2,63
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990011
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£ 2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 240 592
Set 4 - 0 242 240 849, Blister N15 - WR 6 DC
Details
-
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£ 3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 062709000025
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 20,8
- Spark Plug: 3 - Earthed Electrode, with resistor
- Thread Size: M14 x 1.25
- TecDoc Engine Number: AEE
- Condition: New
More
£ 3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: Z27
14 R-6 DU, 0002340701
Details
-
- electrode gap to be set [mm]: 0,7
- Recommended change interval [km]: 20000
- Required quantity: 4
- Fuel Type: Liquefied Petroleum Gas (LPG)
- Alternatively
- Product line: ULTRA
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Self-service suited packaging see parts list
- Technical Information Number: 14 R-6 DU
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: New
More
£ 3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0035P
Details
- Product line: Nickel
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,0
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8 mm
- Spark Plug: Nickel-Copper Center Electrode, 3 - Earthed Electrode, with gasket seat, Nickel Middle Electrode
- Thread Size: M14 x 1,25
- Resistor [kOhm]: 6
- TecDoc Engine Number: AEE
- Condition: New
More
£ 4,26
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W20EPBR-S
D1
Details
-
- TecDoc Engine Number: AEE
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 3 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: 101-000-036AA
- alternative item: W20TT
- Condition: New
More
£ 4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 13530
FDX13MU3A
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: with gasket seat, 3 - Earthed Electrode
- contains article number: 13528
- External Thread Size: M14 x 1,25
- Condition: New
More
£ 4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7100512
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 5,2
- Spanner Size: 20
- Spark Plug: Nickel Middle Electrode, 3 - Earthed Electrode
- Condition: New
More
£ 4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 107 129
14GH-7DTUR
Details
- Spark Plug: 3 - Earthed Electrode
- Supplementary Article / Supplementary Info Info 2: Do not fit parts from different manufacturers!
- Condition: New
More
£ 5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CET8
Details
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£ 5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W20TT
T02
Details
-
- TecDoc Engine Number: AEE
- Required quantity: 4
- Product line: Nickel TT
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Crimped SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 58
- alternative item: IW20, IW20TT, IW20
- Condition: New
More
£ 5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 062110380304
EX/W20EPBR-S
Details
- Spanner Size: 20,6
- Spark Plug: 3 - Earthed Electrode, with resistor
- Thread Size: 14-19
- TecDoc Engine Number: AEE
- Condition: New
More
£ 5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 664
Set 4 - 0 242 235 910, Blister N05 - WR 7 LTC
Details
- Thread Length [mm]: 19
- Spark Position [mm]: 6
- Electrode Gap [mm]: 1,0
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 3
- Condition: New
More
£ 5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: UPT8
Details
-
- Alternatively
- Required quantity: 4
- Supplementary Info: ULTRA TITAN
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Quality/ Grade: Poly-V Tit
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
£ 5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 94024
Blister 09 - 4R
Details
- Supplementary Info: BLISTER
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- TecDoc Engine Number: AEE
- Condition: New
More
£ 5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3172
Details
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- TecDoc Engine Number: AEE
- Condition: New
More
£ 5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 2876
V-Line 1, BUR6ET
Details
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- TecDoc Engine Number: AEE
- Condition: New
More
£ 5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 505
WR 78 X
Details
- Supplementary Info: Super 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Required quantity: 4
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£ 6,16
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: U-SERIE-MS-1
Details
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 3
- Diameter 1 [mm]: 2,7
- Net weight [kg]: 0,04
- Gross Weight [kg]: 0,04
- Condition: New
More
£ 7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 70 products
Show the next items
- 1
- 2
- 3
