Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Skoda Kodiaq NS 1.5TSI 150 hp Petrol
- Coil spring Skoda Kodiaq NS 1.5TSI 150 hp Petrol
- Top strut mount and bearing Skoda Kodiaq NS 1.5TSI 150 hp Petrol
- Suspension kit, coil springs Skoda Kodiaq NS 1.5TSI 150 hp Petrol
- Shock absorber dust cover and bump stops Skoda Kodiaq NS 1.5TSI 150 hp Petrol
- Boot, air suspension Skoda Kodiaq NS 1.5TSI 150 hp Petrol
- Suspension kit, shock absorber and coil spring Skoda Kodiaq NS 1.5TSI 150 hp Petrol
- Repair kit, wheel suspension Skoda Kodiaq NS 1.5TSI 150 hp Petrol
- Camber bolts Skoda Kodiaq NS 1.5TSI 150 hp Petrol
- Relay, leveling control Skoda Kodiaq NS 1.5TSI 150 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Shock absorber Skoda Kodiaq NS 1.5 TSI 150 hp Petrol
Article №: 19-267111
Details
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with standard suspension
- Axle: Multi-link Axle
- Condition: New
More
£ 58,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QAG181582
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
£ 61,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 126 623 0019
Details
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Replace in pairs only
- Article number of recommended accessories: 100 640 0017, 100 412 0141
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
£ 71,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3358020
Details
-
- Fitting Position: Front Axle Right
- Suspension: for vehicles without electronic suspension control
-
- Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
£ 71,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 317 330
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Construction Year to: 07/2018
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Parameter: ST36/25X167A
- Housing Diameter [mm]: 55
- Condition: New
More
£ 78,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V10-7843
Details
- Fitting Position: Front Axle Left, Front Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles without electronic suspension control
- Condition: New
More
£ 96,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 22-282248
Details
- Product line: B4 OE Replacement
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Plate, Top pin
- Suspension: for vehicles with standard suspension
- Condition: New
More
£ 97,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8250-1051
Details
-
- Fitting Position: Rear Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 633
- min. length [mm]: 400
- Colour: Orange
- Packaging length [cm]: 780
- Packaging width [cm]: 65
- Packaging height [cm]: 65
- Condition: New
More
£ 109,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: C2516S
Details
-
- Fitting Position: Front Axle
- Suspension: for vehicles with electronic suspension control
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Weight [kg]: 5,568
- Operating Mode: Electronic
- Packaging length [cm]: 59,1
- Packaging width [cm]: 20,7
- Packaging height [cm]: 21,2
- Condition: New
More
£ 121,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24-229890
Details
- for PR number: 0N4
- Product line: B6 Performance
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Axle: Multi-link Axle
- Length [mm]: 677
- Condition: New
More
£ 124,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8245-1387
Details
-
- Fitting Position: Rear Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
- Shock Absorber System: Twin-Tube, Built-in adjustable
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 632
- min. length [mm]: 405
- Colour: red
- Packaging length [cm]: 780
- Packaging width [cm]: 65
- Packaging height [cm]: 65
- Condition: New
More
£ 131,62
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8750-1123
Details
-
- Fitting Position: Front Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: clamp below, Top pin
- max. length [mm]: 582
- min. length [mm]: 405
- Colour: Orange
- Housing diameter in clamping area [mm]: 55
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
£ 137,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: C1521S
Details
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with electronic suspension control
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Weight [kg]: 4,2
- Operating Mode: Electronic
- Packaging length [cm]: 69,6
- Packaging width [cm]: 13,3
- Packaging height [cm]: 13,6
- Condition: New
More
Article №: 8240-1311SPORT
Details
-
- Fitting Position: Rear Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
- Product line: SPORT
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Bottom eye, Top pin
- max. length [mm]: 633
- min. length [mm]: 400
- Colour: yellow
- adjustable: adjustable
- Packaging length [cm]: 780
- Packaging width [cm]: 65
- Packaging height [cm]: 65
- Condition: New
More
Article №: A-VW-004
Details
- Fitting Position: Rear Axle Left, Rear Axle Right
- Shock Absorber System: Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Braking/Drive Dynamics: for vehicles with DCC suspension
- Fabrication Number: A-VW-004
- Condition: New
More
Article №: A-VW-003
Details
- Fitting Position: Front Axle Left, Front Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- Braking/Drive Dynamics: for vehicles with DCC suspension
- Fabrication Number: A-VW-003
- Condition: New
More
Article №: GH-359967
Details
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Shock Absorber System: Twin-Tube, Electronically adjustable shock strength
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Suspension: for vehicles with electronic suspension control
- Weight [kg]: 5,568
- Operating Mode: Electronic
- Article number of recommended accessories: GH-369964, GH-399961, GH-693610
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 35-274018
Details
- Product line: B6 Performance
- Fitting Position: Front Axle
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 8745-1388
Details
-
- Fitting Position: Front Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
- Shock Absorber System: Twin-Tube, Built-in adjustable
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: clamp below, Top pin
- max. length [mm]: 584
- min. length [mm]: 402
- Braking/Drive Dynamics: for vehicles without electronic drive dynamics control
- Manufacturer Restriction: Front: OE struts
- Colour: red
- Housing diameter in clamping area [mm]: 55
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
Article №: 11-1228
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- Length [mm]: 372, 550
- Suspension Strut Outer Diameter [mm]: 55
- Condition: New
More
Article №: 8741-1572Sport
Details
-
- Fitting Position: Front Axle
- not for vehicle configuration line / variant: Scout
- Braking/Drive Dynamics: for vehicles without DCC suspension
- Quantity per axle: 2
- Product line: SPORT
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: clamp below, Top pin
- max. length [mm]: 584
- min. length [mm]: 407
- Colour: yellow
- adjustable: adjustable
- Housing diameter in clamping area [mm]: 55
- Packaging length [cm]: 570
- Packaging width [cm]: 190
- Packaging height [cm]: 190
- Condition: New
More
Article №: 20-267520
Details
- Product line: B4 OE Replacement (DampTronic®)
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with electronic suspension control
- Axle: Multi-link Axle
- for OE number: 5QF 513 045 H
- Condition: New
More
Article №: 20-267537
Details
- Product line: B6 Performance (DampTronic®)
- Fitting Position: Rear Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with electronic suspension control
- Axle: Multi-link Axle
- Condition: New
More
Article №: 23-238978
Details
- Product line: B4 OE Replacement (DampTronic®)
- Fitting Position: Front Axle
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with electronic suspension control
- for OE number: 5QF 413 031 AC, 5QF 413 032 A
- Length [mm]: 372, 550
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 11-1229
Details
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Suspension: for vehicles with electronic suspension control
- Condition: New
More
Showing 25 out of 86 products
Show the next items
- 1
- 2
- 3
- 4
