Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber SKODA Kamiq (NW4) 1.0TSI 110 hp Petrol
- Coil spring SKODA Kamiq (NW4) 1.0TSI 110 hp Petrol
- Top strut mount and bearing SKODA Kamiq (NW4) 1.0TSI 110 hp Petrol
- Suspension kit, coil springs SKODA Kamiq (NW4) 1.0TSI 110 hp Petrol
- Shock absorber dust cover and bump stops SKODA Kamiq (NW4) 1.0TSI 110 hp Petrol
- Suspension kit, shock absorber and coil spring SKODA Kamiq (NW4) 1.0TSI 110 hp Petrol
- Repair kit, wheel suspension SKODA Kamiq (NW4) 1.0TSI 110 hp Petrol
- Hydraulic oil SKODA Kamiq (NW4) 1.0TSI 110 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring SKODA Kamiq (NW4) 1.0 TSI 110 hp Petrol
Article №: PSS65-81-017-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 50-75
- Axle Load rear axle to [kg]: 900
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 40-70
- Axle Load front axle to [kg]: 1010
-
- Observe service information
- EG type approval number from: e8*?/?*0349*..
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Vehicle Equipment: for vehicles without level control
- Follow installation instructions
- Condition: New
More
Article №: E90-81-017-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Axle Load rear axle to [kg]: 930
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25-30
- Axle Load front axle to [kg]: 930
-
- Observe service information
- EG type approval number from: e8*2007/46*0349*..
- Registration Type: with certificate
- Shock Absorber Type: Gas Pressure
- Suspension: for vehicles without electronic suspension control
- Axle Load rear axle to [kg]: 930
- Condition: New
More
Article №: 46-337269
Details
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 930
- Lowered Suspension ca. [mm]: 25-30
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 930
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Condition: New
More
You may also be interested in
Article №: 47-127708
Details
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-251588
Details
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: PSS65-79-012-04-22
Details
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 55
- Axle: Multi-link Axle
- Vehicle Equipment: for vehicles without level control
- Follow installation instructions
- Condition: New
More
Article №: 47-229945
Details
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 47-254954
Details
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: PSS65-79-016-01-22
Details
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Registration Type: with certificate
- Axle Load front axle to [kg]: 1095
- Axle Load rear axle to [kg]: 1110
- Suspension Strut Outer Diameter [mm]: 55
- Vehicle Equipment: for vehicles without level control
- Follow installation instructions
- Condition: New
More
Article №: 40261-3
Details
- for components see parts list
- Axle Load front axle to [kg]: 1020
- Suspension Strut Outer Diameter [mm]: 50
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Condition: New
More
Article №: 35258-2
Details
- for components see parts list
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 70
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Suspension Strut Outer Diameter [mm]: 50
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 29431-1
Details
- for components see parts list
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 29271-2
Details
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 55
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 40261-2
Details
- for components see parts list
- Axle Load front axle from [kg]: 1021
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Quantity Unit: Kit
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Lowered Suspension ca. [mm]: 35
- Suspension Strut Outer Diameter [mm]: 55
- Vehicle type: 8P, 5P, 1Z, 1K, 1KP, 1KM
- Follow installation instructions
- Condition: New
More
Article №: 29258-1
Details
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Spring Design: Coil Spring
- Shock Absorber System: Monotube
- Lowered Suspension ca. [mm]: 30-60
- Vehicle type: 8P, 8PA, 8PB, 5P, 5PN, 1P, 1PN, 1Z, 1K, 1KM, 1KP, 3CC
- Suspension Strut Outer Diameter [mm]: 55
- Follow installation instructions
- Condition: New
More
Article №: PSS65-15-021-08-22
Details
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 50
- Axle: Twist-beam Rear Axle
- Vehicle Equipment: for vehicles without level control
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: PSS65-85-014-04-22
Details
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 50
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: PSS65-85-014-01-22
Details
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 55
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: E90-79-004-08-22
Details
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1100
- Axle Load rear axle to [kg]: 1150
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: SA1185N0025
£ 128,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SA1185N0014
£ 135,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MNE1185N0065
Details
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp, Bottom eye
- Length [mm]: 418, 655
- Condition: New
More
Article №: KYB1185N0004
Details
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom eye
- Condition: New
More
Article №: SA1185N0008
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Inside the package:
More
Article №: SA1185N0004
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Condition: New
More
Inside the package:
- Coil spring 2
- Shock absorber 2
- Dust cover kit, shock absorber 1
- Top strut mount 2
- Anti-Friction Bearing, suspension strut support mounting 2
More
