Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Skoda Fabia 3 1.6 90 hp Petrol
- Brake pads Skoda Fabia 3 1.6 90 hp Petrol
- Brake caliper Skoda Fabia 3 1.6 90 hp Petrol
- Drum brake Skoda Fabia 3 1.6 90 hp Petrol
- ABS sensor Skoda Fabia 3 1.6 90 hp Petrol
- Brake caliper repair kit Skoda Fabia 3 1.6 90 hp Petrol
- Handbrake Skoda Fabia 3 1.6 90 hp Petrol
- Brake disc back plate Skoda Fabia 3 1.6 90 hp Petrol
- Brake caliper carrier Skoda Fabia 3 1.6 90 hp Petrol
- Brake shoes Skoda Fabia 3 1.6 90 hp Petrol
- Brake hose FABIA 1.6 90 hp Petrol
- Brake drum FABIA 1.6 90 hp Petrol
- Handbrake cable FABIA 1.6 90 hp Petrol
- Guide sleeve kit, brake caliper FABIA 1.6 90 hp Petrol
- Brake fluid FABIA 1.6 90 hp Petrol
- Brake pad fitting kit FABIA 1.6 90 hp Petrol
- Brake servo FABIA 1.6 90 hp Petrol
- Wheel cylinder FABIA 1.6 90 hp Petrol
- Accessory kit, brake shoes FABIA 1.6 90 hp Petrol
- Brake pads and discs FABIA 1.6 90 hp Petrol
- Brake light switch FABIA 1.6 90 hp Petrol
- Brake disc bolts FABIA 1.6 90 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Skoda Fabia 3 1.6 90 hp Petrol
Article №: 82B0003
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KT, 1KV, 2EJ
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 16
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 8,8
- Centering Diameter [mm]: 65
- Height [mm]: 39,7
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-57%
compared to RRP:
£26,00
£11,03
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKAD-2002
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KT, 1KV, 2EJ
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 16
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 8,8
- Centering Diameter [mm]: 65
- Height [mm]: 39,7
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-57%
compared to RRP:
£26,00
£11,03
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 18488
Details
- for PR number: 1KT
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 40
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
-57%
compared to RRP:
£35,98
£15,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 9072015
Details
-
- Construction Year from: 01/2015
- Construction Year to: 07/2018
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Height [mm]: 40,6
- Weight [kg]: 2,78
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£17,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0003P
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KT, 1KV, 2EJ
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 16
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 8,8
- Centering Diameter [mm]: 65
- Height [mm]: 39,7
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£17,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV184302
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 41
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
-57%
compared to RRP:
£41,98
£17,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV184325
Details
- for PR number: 1KT
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 40
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£49,98
£17,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 30 91 8488
Details
- for PR number: 1KT
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 40,37
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Weight [kg]: 2,6
- Surface: Coated
- Number of mounting bores: 1
- Drilled: no
- Condition: New
More
-56%
compared to RRP:
£41,99
£18,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 115 523 0037
Details
- for PR number: 1KT
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Height [mm]: 39,5
- Required quantity: 2
- Drilled: no
- Condition: New
More
-5%
compared to RRP:
£20,33
£19,31
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 105-411
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KT, 1KV, 2EJ
- Product line: PRO
- Diameter [mm]: 230
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 15,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 124,2
- Height [mm]: 39,5
- Weight [kg]: 2,7
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£53,89
£19,38
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 115 523 0037/PD
Details
- for PR number: 1KT
- Supplementary Info: MEYLE-PD Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Height [mm]: 39,5
- Surface: Zink flake coated
- Required quantity: 2
- Quality: PREMIUM
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-23%
compared to RRP:
£26,40
£20,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92082503
Details
-
- Fitting Position: Rear Axle
- for PR number: 1KT, 1KV, 2EJ
- Product line: PRO
- Diameter [mm]: 230
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 15,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 124,2
- Height [mm]: 39,5
- Weight [kg]: 2,7
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 24,8
- Packaging width [cm]: 24,8
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£60,61
£20,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 14404
Details
- for PR number: 1ZG
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 37
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
-59%
compared to RRP:
£51,98
£21,15
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 107 683
Details
- for PR number: 1KT, 2EJ
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Hub Diameter [mm]: 135,5
- Height [mm]: 40
- Surface: Coated
- Replace in pairs only
- Drilled: no
- Condition: New
More
-26%
compared to RRP:
£29,60
£21,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 32 91 4404
Details
- for PR number: 1ZG
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 36,7
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Weight [kg]: 5,07
- Surface: Coated
- Number of mounting bores: 1
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£87,99
£24,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 105-361
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZE, 1ZG, 1ZJ
- Product line: PRO
- Diameter [mm]: 256
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 15,7
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 133,4
- Height [mm]: 36,7
- Weight [kg]: 5,2
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-70%
compared to RRP:
£83,88
£24,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 9072014
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Height [mm]: 36
- Weight [kg]: 5,31
- Number of mounting bores: 1
- No. of holes 1: 1
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with screw
- Drilled: no
- Condition: New
More
£24,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV184301
Details
- for PR number: 1ZG
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 37
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£87,98
£25,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 127-291
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZE, 1ZG, 1ZJ
- Product line: PRO High Carbon
- Diameter [mm]: 256
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 15,7
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 133,4
- Height [mm]: 36,7
- Weight [kg]: 5,2
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£73,68
£26,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV184309
Details
- for PR number: 1ZC
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 34
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Surface: Coated
- Number of mounting bores: 5
- Observe service information
- Drilled: no
- Condition: New
More
£31,00
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92082205
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZE, 1ZG, 1ZJ
- Product line: PRO+
- Diameter [mm]: 256
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 15,7
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 133,4
- Height [mm]: 36,7
- Weight [kg]: 5,2
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£92,83
£31,27
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19370
Details
- for PR number: 1ZC
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 34
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Surface: Coated
- Number of mounting bores: 5
- Observe service information
- Drilled: no
- Condition: New
More
-53%
compared to RRP:
£67,98
£31,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 107-611
Details
-
- Fitting Position: Front Axle
- for PR number: 1ZC, 1ZD
- Product line: PRO
- Diameter [mm]: 288
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Inner Diameter [mm]: 136,4
- Height [mm]: 34,4
- Weight [kg]: 7,1
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-65%
compared to RRP:
£100,16
£34,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 30 91 9370
Details
- for PR number: 1ZC
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 34,2
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 65
- Weight [kg]: 7,1
- Surface: Coated
- Number of mounting bores: 5
- Drilled: no
- Condition: New
More
£35,87
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 672556
Details
-
- Construction Year from: 01/2015
- Construction Year to: 07/2018
- for PR number: 1KT
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 9
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 65
- Height [mm]: 40
- Weight [kg]: 5,7
- Surface: Coated
- Drilled: no
- Condition: New
More
£36,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 47 products
