Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber SEAT Leon IV (KL1) 2.0TFSI 190 hp Petrol
- Coil spring SEAT Leon IV (KL1) 2.0TFSI 190 hp Petrol
- Top strut mount and bearing SEAT Leon IV (KL1) 2.0TFSI 190 hp Petrol
- Suspension kit, coil springs SEAT Leon IV (KL1) 2.0TFSI 190 hp Petrol
- Shock absorber dust cover and bump stops SEAT Leon IV (KL1) 2.0TFSI 190 hp Petrol
- Boot, air suspension SEAT Leon IV (KL1) 2.0TFSI 190 hp Petrol
- Suspension kit, shock absorber and coil spring SEAT Leon IV (KL1) 2.0TFSI 190 hp Petrol
- Relay, leveling control SEAT Leon IV (KL1) 2.0TFSI 190 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring SEAT Leon IV (KL1) 2.0 TFSI 190 hp Petrol
Article №: E95-85-051-05-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-35
- Axle Load rear axle to [kg]: 965
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30-35
- Axle Load front axle to [kg]: 1110
-
- Observe service information
- Registration Type: with certificate
- EG type approval number from: e9*2007/46*3167*..
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Suspension Strut Outer Diameter [mm]: 55
- Axle: Multi-link Axle
- Suspension: for vehicles without electronic suspension control
- Axle Load rear axle to [kg]: 930
- Condition: New
More
Article №: E95-81-018-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-35
- Axle Load rear axle to [kg]: 965
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30-35
- Axle Load front axle to [kg]: 1110
-
- Observe service information
- Registration Type: with certificate
- EG type approval number from: e9*2007/46*3167*..
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Suspension Strut Outer Diameter [mm]: 50
- Axle: Multi-link Axle
- Suspension: for vehicles without electronic suspension control
- Condition: New
More
Article №: 47-254954
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 0-35
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G01
- Lowered Suspension ca. [mm]: 25-40
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 47-251588
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 0-35
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G02
- Lowered Suspension ca. [mm]: 25-40
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-229952
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 0-35
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G02
- Lowered Suspension ca. [mm]: 25-40
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 48-230032
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 0-35
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G01
- Lowered Suspension ca. [mm]: 25-40
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: ME1185N0099
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: 47-229945
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 0-35
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G01
- Lowered Suspension ca. [mm]: 25-40
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 47-342941
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 980
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1090
- Lowered Suspension ca. [mm]: 20-35
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Axle: Multi-link Axle
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable)
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-309067
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 980
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1090
- Lowered Suspension ca. [mm]: 20-35
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-313750
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 980
- Lowered Suspension ca. [mm]: 10-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1090
- Lowered Suspension ca. [mm]: 20-35
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 47-313767
Details
- Suspension: for vehicles with standard suspension, Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension Strut Outer Diameter [mm]: 50
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 48-609073
Details
-
- Fitting Position: Rear Axle
- Axle: Multi-link Axle
- Axle Load [kg] to: 1253
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 0-35
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G02
- Lowered Suspension ca. [mm]: 25-40
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 47-313774
Details
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 48-230049
Details
-
- Fitting Position: Rear Axle
- Axle: Rigid Axle
- Axle Load [kg] to: 1253
- for PR number: 0N1
- Lowered Suspension ca. [mm]: 0-35
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G02
- Lowered Suspension ca. [mm]: 25-40
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 48-251570
Details
-
- Fitting Position: Rear Axle
- Axle: Multi-link Axle
- Axle Load [kg] to: 1253
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 0-35
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G02
- Lowered Suspension ca. [mm]: 25-40
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 48-254960
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1253
- for PR number: 0N4
- Lowered Suspension ca. [mm]: 0-35
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- for PR number: G01
- Lowered Suspension ca. [mm]: 25-40
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Adjustable Shock Strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 50
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 49-309089
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1255
- Lowered Suspension ca. [mm]: 30-50
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1200
- Lowered Suspension ca. [mm]: 25-45
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength
- Suspension: Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 49-313789
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1180
- Lowered Suspension ca. [mm]: 20-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1120
- Lowered Suspension ca. [mm]: 15-35
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Electronically adjustable shock strength
- Axle: Rigid Axle
- Registration Type: Conditions see certificate
- Suspension: for vehicles with electronic suspension control, Threaded Suspension (height adjustable)
- Suspension Strut Outer Diameter [mm]: 55
- Condition: New
More
Article №: 89-313022
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 0-30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 10-30
-
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Built-in adjustable
- Registration Type: without TÜV® certificate, not permitted in the area of the StVZO
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Supplementary Article / Supplementary Info Info 2: with suspension strut support mount
- Suspension Strut Outer Diameter [mm]: 55
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: SA1185N0062
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
