Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Seat León Mk2 1.4TSI 125 hp Petrol
- Coil spring Seat León Mk2 1.4TSI 125 hp Petrol
- Top strut mount and bearing Seat León Mk2 1.4TSI 125 hp Petrol
- Suspension kit, coil springs Seat León Mk2 1.4TSI 125 hp Petrol
- Shock absorber dust cover and bump stops Seat León Mk2 1.4TSI 125 hp Petrol
- Boot, air suspension Seat León Mk2 1.4TSI 125 hp Petrol
- Suspension kit, shock absorber and coil spring Seat León Mk2 1.4TSI 125 hp Petrol
- Repair kit, wheel suspension Seat León Mk2 1.4TSI 125 hp Petrol
- Spring cap Seat León Mk2 1.4TSI 125 hp Petrol
- Camber bolts Seat León Mk2 1.4TSI 125 hp Petrol
- Relay, leveling control LEON 1.4TSI 125 hp Petrol
- Mounting, shock absorbers LEON 1.4TSI 125 hp Petrol
- Shock absorber mounting brackets LEON 1.4TSI 125 hp Petrol
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Seat León Mk2 1.4 TSI 125 hp Petrol
Article №: 1120-1762
Details
-
- Lowered front axle to [mm]: 40
- Lowered rear axle to [mm]: 40
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: cannot be set/adjusted, Twin-Tube
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 40176-2
Details
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Lowered Suspension [mm]: 40
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 50
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Condition: New
More
Article №: 40176-1
Details
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Lowered Suspension [mm]: 40
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 55
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Condition: New
More
Article №: 1140-1762
Details
-
- Lowered front axle to [mm]: 40
- Lowered rear axle to [mm]: 40
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 50
- Condition: New
More
Article №: 1140-1761
Details
-
- Lowered front axle to [mm]: 40
- Lowered rear axle to [mm]: 40
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: E90-81-009-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Suspension Strut Outer Diameter [mm]: 50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1022
- Axle Load rear axle to [kg]: 965
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: E90-81-009-02-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1022
- Axle Load rear axle to [kg]: 965
- Product line: B12 Pro-Kit
- Condition: New
More
Article №: E95-81-009-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 45-50
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension Strut Outer Diameter [mm]: 50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1040
- Axle Load rear axle to [kg]: 930
- Product line: B12 Sportline
- Condition: New
More
Article №: E95-81-009-02-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 45-50
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 1040
- Axle Load rear axle to [kg]: 930
- Product line: B12 Sportline
- Condition: New
More
Article №: PSS65-81-009-05-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load rear axle to [kg]: 1000
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load front axle to [kg]: 1105
-
- Observe service information
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 50
- Axle Load rear axle to [kg]: 1000
- Vehicle Equipment: for vehicles without level control
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
-36%
compared to RRP:
£1318,02
£839,46
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 29258-1
Details
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Lowered rear axle to [mm]: 60
-
- Lowered rear axle from [mm]: 30
-
- Lowered front axle to [mm]: 60
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Spring Design: Coil Spring
- Shock Absorber System: Monotube
- Lowered Suspension ca. [mm]: 30-60
- Vehicle type: 8P, 8PA, 8PB, 5P, 5PN, 1P, 1PN, 1Z, 1K, 1KM, 1KP, 3CC
- Suspension Strut Outer Diameter [mm]: 55
- Follow installation instructions
- Condition: New
More
Article №: 29258-2
Details
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Lowered rear axle to [mm]: 60
-
- Lowered rear axle from [mm]: 30
-
- Lowered front axle to [mm]: 60
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 50
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 29225-2
Details
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Lowered rear axle to [mm]: 70
-
- Lowered rear axle from [mm]: 40
-
- Lowered front axle to [mm]: 80
-
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 80
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 70
- for components see parts list
- Suspension Strut Outer Diameter [mm]: 50
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 29225-1
Details
-
- Registration Type: with TÜV® certificate
-
- Lowered rear axle from [mm]: 40
-
- Pipe Diameter [mm]: 55
-
- Lowered rear axle to [mm]: 70
-
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 80
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 70
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Spring Design: Coil Spring
- Shock Absorber System: Monotube
- Lowered front axle [mm]: 50-80
- Lowered rear axle [mm]: 50-70
- Vehicle type: 8P, 8PA, 8PB, 5P, 5PN, 1F, 1P, 1PN, 1K, 1KM, 1KP, 3C, 3CC, 3c
- Suspension Strut Outer Diameter [mm]: 55
- Follow installation instructions
- Condition: New
More
Article №: 47-127708
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1095
- Lowered Suspension ca. [mm]: 20-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1210
- Lowered Suspension ca. [mm]: 30-40
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Suspension Strut Outer Diameter [mm]: 55
- Product line: - B14 PSS
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 35258-1
Details
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Lowered rear axle to [mm]: 60
-
- Lowered rear axle from [mm]: 30
-
- Lowered front axle to [mm]: 70
-
- Lowered front axle from [mm]: 40
- for components see parts list
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 70
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Registration Type: with TÜV® certificate
- Quantity Unit: Kit
- Fitting Position: Front Axle, Rear Axle
- Shock Absorber System: Twin-Tube
- Spring Design: Coil Spring
- Suspension Strut Outer Diameter [mm]: 55
- Lowered front axle [mm]: 40-70
- Lowered rear axle [mm]: 30-60
- Vehicle type: 8P, 8PA, 5P, 5PN, 1P, 1PN, 1Z, 1F, 1K, 1KM, 3C, 3CC, 3c
- Shock Absorber Design: Suspension Strut
- Follow installation instructions
- Condition: New
More
Article №: 35258-2
Details
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Lowered rear axle to [mm]: 60
-
- Lowered rear axle from [mm]: 30
-
- Lowered front axle to [mm]: 70
-
- Lowered front axle from [mm]: 40
- for components see parts list
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 70
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Suspension Strut Outer Diameter [mm]: 50
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: PSS65-81-009-03-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load rear axle to [kg]: 1000
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load front axle to [kg]: 1170
-
- Observe service information
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 55
- Axle Load rear axle to [kg]: 1000
- Vehicle Equipment: for vehicles without level control
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: PSS65-81-009-06-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load rear axle to [kg]: 1000
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load front axle to [kg]: 1170
-
- Observe service information
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 50
- Axle Load rear axle to [kg]: 1000
- Vehicle Equipment: for vehicles without level control
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: PSS65-81-009-04-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load rear axle to [kg]: 1000
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load front axle to [kg]: 1035
-
- Observe service information
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 50
- Axle Load rear axle to [kg]: 1000
- Vehicle Equipment: for vehicles without level control
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: PSS65-81-009-02-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load rear axle to [kg]: 1000
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load front axle to [kg]: 1105
-
- Observe service information
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 55
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: PSS65-81-009-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load rear axle to [kg]: 1000
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-65
- Axle Load front axle to [kg]: 1035
-
- Observe service information
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Suspension Strut Outer Diameter [mm]: 55
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: 36258-1
Details
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Lowered rear axle to [mm]: 60
-
- Lowered rear axle from [mm]: 30
-
- Lowered front axle to [mm]: 70
-
- Lowered front axle from [mm]: 40
- for components see parts list
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 70
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Shock Absorber System: Adjustable Shock Strength
- Suspension Strut Outer Diameter [mm]: 55
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: 48-135245
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1095
- Lowered Suspension ca. [mm]: 20-40
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1210
- Lowered Suspension ca. [mm]: 30-40
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS10
- Housing diameter in clamping area [mm]: 55
- Condition: New
More
Article №: 1185S0052
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin, Bottom Plate
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Bearing Type: Rolling Bearing
- Quantity Unit: Set
- Condition: New
More
£90,15
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 74 products
Show the next items
- 1
- 2
- 3
