Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
-
Damping
- Shock absorber Seat Ibiza 6j Estate 1.6TDI 105 hp Diesel
- Coil spring Seat Ibiza 6j Estate 1.6TDI 105 hp Diesel
- Top strut mount and bearing Seat Ibiza 6j Estate 1.6TDI 105 hp Diesel
- Suspension kit, coil springs Seat Ibiza 6j Estate 1.6TDI 105 hp Diesel
- Shock absorber dust cover and bump stops Seat Ibiza 6j Estate 1.6TDI 105 hp Diesel
- Suspension kit, shock absorber and coil spring Seat Ibiza 6j Estate 1.6TDI 105 hp Diesel
- Repair kit, wheel suspension Seat Ibiza 6j Estate 1.6TDI 105 hp Diesel
- Spring cap Seat Ibiza 6j Estate 1.6TDI 105 hp Diesel
- Hydraulic oil Seat Ibiza 6j Estate 1.6TDI 105 hp Diesel
- Camber bolts Seat Ibiza 6j Estate 1.6TDI 105 hp Diesel
- Mounting, shock absorbers IBIZA 1.6TDI 105 hp Diesel
- Shock absorber mounting brackets IBIZA 1.6TDI 105 hp Diesel
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Suspension kit, shock absorber and coil spring Seat Ibiza 6j Estate 1.6 TDI 105 hp Diesel
Article №: 40018-3
Details
-
- Registration Type: with TÜV® certificate
-
- Axle Load front axle to [kg]: 860
-
- Lowered rear axle [mm]: 40
-
- Lowered front axle [mm]: 25
- for components see parts list
- Lowered front axle [mm]: 25
- Lowered rear axle [mm]: 40
- Axle Load front axle to [kg]: 860
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Condition: New
More
Article №: 40018-4
Details
-
- Registration Type: with TÜV® certificate
-
- Axle Load front axle from [kg]: 861
-
- Lowered rear axle [mm]: 40
-
- Lowered front axle [mm]: 25
- for components see parts list
- Lowered front axle [mm]: 25
- Lowered rear axle [mm]: 40
- Axle Load front axle from [kg]: 861
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Condition: New
More
Article №: 1140-0183
Details
-
- Axle Load front axle to [kg]: 860
- Lowered front axle to [mm]: 25
- Lowered rear axle to [mm]: 40
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- for RPO number: DQ042
- Condition: New
More
Article №: 1140-0184
Details
-
- Axle Load front axle from [kg]: 861
- Lowered front axle to [mm]: 25
- Lowered rear axle to [mm]: 40
- Fitting Position: Rear Axle, Front Axle
- Shock Absorber System: Twin-Tube, adjustable
- for RPO number: DQ043
- Condition: New
More
Article №: E90-81-010-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Vehicle Equipment: for vehicles without level control
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25
-
- Registration Type: Conditions see certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 870
- Axle Load rear axle to [kg]: 840
- Suspension: for vehicles without electronic suspension control
- Product line: B12 Pro-Kit
- Follow installation instructions
- Condition: New
More
Article №: E90-81-010-02-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Vehicle Equipment: for vehicles without level control
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25
-
- Registration Type: Conditions see certificate
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Monotube
- Axle Load front axle to [kg]: 960
- Axle Load rear axle to [kg]: 840
- Suspension: for vehicles without electronic suspension control
- Product line: B12 Pro-Kit
- Follow installation instructions
- Condition: New
More
Article №: 47-168091
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 820
- Lowered Suspension ca. [mm]: 30-45
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 950
- Lowered Suspension ca. [mm]: 35-50
- Shock Absorber Type: Gas Pressure
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B14 PSS
- Condition: New
More
Article №: 29015-2
Details
-
- Registration Type: with TÜV® certificate
-
- Axle Load front axle from [kg]: 930
-
- Lowered rear axle to [mm]: 70
-
- Lowered rear axle from [mm]: 40
-
- Lowered front axle to [mm]: 60
-
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 70
- for components see parts list
- Registration Type: with TÜV® certificate
- Axle Load front axle from [kg]: 930
- Follow installation instructions
- Condition: New
More
Article №: 29015-1
Details
-
- Registration Type: with TÜV® certificate
-
- Axle Load front axle to [kg]: 929
-
- Lowered rear axle to [mm]: 70
-
- Lowered rear axle from [mm]: 40
-
- Lowered front axle from [mm]: 40
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 70
- for components see parts list
- Axle Load front axle to [kg]: 929
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Condition: New
More
Article №: PSS65-81-010-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-55
- Axle Load rear axle to [kg]: 830
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 15-50
- Axle Load front axle to [kg]: 860
-
- Observe service information
- EG type approval number from: e9*?/?*0067*..
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Registration Type: with certificate
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: PSS65-81-010-02-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-55
- Axle Load rear axle to [kg]: 830
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 15-50
- Axle Load front axle to [kg]: 950
-
- Observe service information
- EG type approval number from: e9*?/?*0067*..
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Registration Type: with certificate
- Product line: Pro-Street-S
- Follow installation instructions
- Condition: New
More
Article №: 48-168229
Details
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 820
- Lowered Suspension ca. [mm]: 30-45
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 950
- Lowered Suspension ca. [mm]: 35-50
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Mechanically adjustable shock strength, Built-in adjustable
- Registration Type: Conditions see certificate
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Product line: - B16 PSS9
- Condition: New
More
Article №: PSM69-15-014-01-22
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35-60
- Axle Load rear axle to [kg]: 880
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-60
- Axle Load front axle to [kg]: 1000
-
- Observe service information
- Suspension: Adjustable Struts (height and performance adjustable)
- Registration Type: with certificate
- Shock Absorber System: Adjustable Shock Strength, Height Adjustable, Single Tube Upside Down
- Vehicle Equipment: for vehicles without level control
- Axle Load front axle to [kg]: 1000
- Axle Load rear axle to [kg]: 880
- Follow installation instructions
- Condition: New
More
Article №: 1185S0025
Details
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Quantity Unit: Set
- Thickness [mm]: 54,0
- Inner Diameter [mm]: 26,0
- Diameter [mm]: 83,0
- Material: Elastomer
- Fitting Position: Front axle both sides
- Supplementary Article / Supplementary Info Info 2: without bearing
- Condition: New
More
£72,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MNE1185N0009
Details
- Length [mm]: 420, 631
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Supplementary Article / Supplementary Info Info 2: without bearing
- Condition: New
More
£94,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MNE1185N0096
Details
- Bore Diameter [mm]: 32
- Piston Rod Diameter [mm]: 22
- Weight [kg]: 4,000
- Packaging length [cm]: 51,5
- Packaging width [cm]: 16,1
- Packaging height [cm]: 16,1
- Length [mm]: 362, 510
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
£117,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: KYB1185N0013
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
£131,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MNE1185N0007
Details
- Length [mm]: 360, 510
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Condition: New
More
Inside the package:
- Shock absorber 2
- Dust cover kit, shock absorber 1
- Anti-Friction Bearing, suspension strut support mounting 2
- Repair kit, suspension strut 2
More
£135,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: KYB1185N0019
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: KYB1185N0020
Details
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Condition: New
More
Article №: SAW001MT
£98,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: IA MXS758
Details
- Fitting Position: Rear Axle, Front Axle
- Quantity Unit: Set
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable
- Shock Absorber Mounting Type: Bottom eye
- Axle Load front axle to [kg]: 960
- Axle Load rear axle to [kg]: 840
- Lowered front axle from [mm]: 35
- Lowered front axle to [mm]: 65
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: IA MXS205
Details
- Fitting Position: Rear Axle, Front Axle
- Quantity Unit: Set
- Shock Absorber Design: Suspension Strut
- Spring Design: Coil Spring
- Surface: Powder coated
- Shock Absorber System: Height Adjustable
- Shock Absorber Mounting Type: Bottom eye
- Axle Load front axle to [kg]: 1280
- Axle Load rear axle to [kg]: 1450
- Lowered front axle from [mm]: 35
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 35
- Lowered rear axle to [mm]: 60
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Condition: New
More
Article №: 123281114
Details
-
- Fitting Position: Rear Axle
- Lowered Suspension [mm]: 30
- Axle Load rear axle to [kg]: 820
-
- Fitting Position: Front Axle
- Lowered Suspension [mm]: 30
- Axle Load front axle to [kg]: 960
- Registration Type: with TÜV® certificate
- Shock Absorber Type: Oil Pressure
- Condition: New
More
Article №: 23281114
Details
-
- Lowered front axle [mm]: 30
- Lowered rear axle [mm]: 30
- Axle Load front axle to [kg]: 960
- Axle Load rear axle to [kg]: 820
- Registration Type: with TÜV® certificate
- Shock Absorber Type: Oil Pressure
- Number of springs: 4
- Condition: New
More
Showing 25 out of 40 products
