Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Seat Ibiza 6k 1.0 45 hp Petrol
- Ignition coil Seat Ibiza 6k 1.0 45 hp Petrol
- Glow plug control module Seat Ibiza 6k 1.0 45 hp Petrol
- Ignition leads Seat Ibiza 6k 1.0 45 hp Petrol
- Camshaft sensor Seat Ibiza 6k 1.0 45 hp Petrol
- Crankshaft sensor Seat Ibiza 6k 1.0 45 hp Petrol
- Distributor cap Seat Ibiza 6k 1.0 45 hp Petrol
- Timing cover gasket Seat Ibiza 6k 1.0 45 hp Petrol
- Distributor rotor Seat Ibiza 6k 1.0 45 hp Petrol
- Distributor and parts Seat Ibiza 6k 1.0 45 hp Petrol
- Ignition module IBIZA 1.0 45 hp Petrol
- Plug, spark plug IBIZA 1.0 45 hp Petrol
- Engine control unit (ECU) IBIZA 1.0 45 hp Petrol
- Repair kit, distributor IBIZA 1.0 45 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs Seat Ibiza 6k 1.0 45 hp Petrol
Article №: 686S0010
Details
-
- Construction Year to: 06/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0011
Details
-
- Construction Year to: 06/1996
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0035
Details
- External Thread [mm]: 14,0
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,2
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0069
Details
-
- Construction Year to: 06/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0310
Details
-
- Construction Year to: 06/1996
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0070
Details
-
- Construction Year to: 06/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0319
Details
- External Thread [mm]: 14,0
- Product line: V-Line
- Thread Length [mm]: 19,0
- Spanner Size: 20,8 mm
- Spark Plug: Connector Type M4, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat
- Condition: New
More
£15,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990010
Details
-
- Construction Year to: 06/1996
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990009
Details
-
- Construction Year to: 06/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0011P
Details
-
- Construction Year to: 06/1996
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£2,70
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0010P
Details
-
- Construction Year to: 06/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£2,98
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 663
Set 4 - 0 242 235 909, Blister N02 - WR 7 DC
Details
-
- Construction Year to: 06/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0011
Details
-
- Construction Year to: 06/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Length [mm]: 126
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 229 656
Set 4 - 0 242 229 880, Blister N07 - WR 8 DC
Details
-
- Construction Year to: 06/1996
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W20EPBR-S
D1
Details
-
- TecDoc Engine Number: AAU
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 3 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 56
- for OE number: 101-000-036AA
- alternative item: W20TT
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0035P
Details
- Product line: Nickel
- Thread Length [mm]: 19,0
- Spark Position [mm]: 5,0
- Electrode Gap [mm]: 1,1
- Spanner Size: 20,8 mm
- Spark Plug: Nickel-Copper Center Electrode, 3 - Earthed Electrode, with gasket seat, Nickel Middle Electrode
- Thread Size: M14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£4,70
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0001
Details
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Construction Year to: 06/1996
- Weight [kg]: 0,06
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CET8
Details
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 21 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET8
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: W20TT
T02
Details
-
- TecDoc Engine Number: AAU
- Required quantity: 4
- Product line: Nickel TT
- Thread Length [mm]: 19
- Spanner Size: 20.6 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Crimped SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 58
- alternative item: IW20, IW20TT, IW20
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 7100511
Details
- Thread Length [mm]: 19
- Spanner Size: 20
- Spark Plug: Nickel Middle Electrode, 3 - Earthed Electrode
- for OE number: 101000026AA
- Condition: New
More
£5,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-19990308
Details
-
- Construction Year to: 06/1996
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990068
Details
-
- Construction Year to: 06/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0069P
Details
-
- Construction Year to: 06/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990136
Details
-
- Engine Code: AAU
- Fuel Type: CNG/LPG
- Required quantity: 4
- Product line: Iridium TT
- Thread Length [mm]: 19
- Spanner Size: 20.6
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode
- Thread Size: M14x1.25
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Condition: New
More
£11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0070P
Details
-
- Construction Year to: 06/1996
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£17,86
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 85 products
Show the next items
- 1
- 2
- 3
- 4
