Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Clutch
- Clutch kit SEAT Alhambra 7M 1.9TDI 90 hp Diesel
- Flywheel SEAT Alhambra 7M 1.9TDI 90 hp Diesel
- Clutch master cylinder SEAT Alhambra 7M 1.9TDI 90 hp Diesel
- Clutch slave cylinder SEAT Alhambra 7M 1.9TDI 90 hp Diesel
- Central slave cylinder SEAT Alhambra 7M 1.9TDI 90 hp Diesel
- Clutch plate SEAT Alhambra 7M 1.9TDI 90 hp Diesel
- Clutch pressure plate SEAT Alhambra 7M 1.9TDI 90 hp Diesel
- Clutch release bearing SEAT Alhambra 7M 1.9TDI 90 hp Diesel
- Flywheel bolt SEAT Alhambra 7M 1.9TDI 90 hp Diesel
- Pedals and pedal covers SEAT Alhambra 7M 1.9TDI 90 hp Diesel
- Clutch switch ALHAMBRA 1.9TDI 90 hp Diesel
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Clutch kit SEAT Alhambra 7M 1.9 TDI 90 hp Diesel
Article №: 479C0197
Details
-
- TecDoc Engine Number: ANU
- Vehicle Identification Number (VIN) from: 1#510001
- for flywheel manufacturer: Sachs
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, Check and replace dual-mass flywheel if necessary.
- Multi-piece: two-piece
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
More
£ 98,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 479C0165
Details
-
- TecDoc Engine Number: ANU
- Vehicle Identification Number (VIN) from: 1#000001
- for flywheel manufacturer: LuK
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
More
£ 99,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 479C0882
Details
-
- Engine Code: ANU
- Vehicle Identification Number (VIN) from: 1#000001
- for flywheel manufacturer: LuK
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate
- Multi-piece: three-piece
- Condition: New
More
£ 132,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 479C0801
Details
-
- TecDoc Engine Number: ANU
- Vehicle Identification Number (VIN) from: ******7M*1*510001
- for clutch manufacturers: Sachs
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Weight [kg]: 5,865
- for flywheel manufacturer: Sachs
- Condition: New
More
£ 135,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.368
Details
-
- TecDoc Engine Number: ANU
- Vehicle Identification Number (VIN) to: Y#050000
- Supplementary Article / Supplementary Info: without central slave cylinder
- Hub Profile: 23x26-23N
- Clutch Equipment: without CSC
- Condition: New
More
£ 66,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 959061
Details
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Hub Profile: 25,4 x 23
- Parameter: M 228
- TecDoc Engine Number: 1Z, AHU
- Condition: New
More
£ 72,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: KE-VG03R
Details
-
- for flywheel manufacturer: SACHS
- TecDoc Engine Number: ANU
- Vehicle Identification Number (VIN) from: 1#510001
- Condition: New
More
£ 97,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.383
Details
-
- TecDoc Engine Number: ANU
- for flywheel manufacturer: LUK
- Vehicle Identification Number (VIN) from: 1#510001
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: without bearing
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Clutch Equipment: without CSC
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
£ 97,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 120.391
Details
-
- TecDoc Engine Number: ANU
- Vehicle Identification Number (VIN) to: Y#050000
- Supplementary Article / Supplementary Info: with central slave cylinder
- Hub Profile: 23x26-23N
- Clutch Equipment: with CSC
- Condition: New
More
£ 98,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKCK-0100164
Details
-
- TecDoc Engine Number: ANU
- Vehicle Identification Number (VIN) from: 1#000001
- for flywheel manufacturer: LuK
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
More
£ 99,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADV183019
Details
- Diameter [mm]: 241
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Weight [kg]: 5,672
- Observe service information
- Condition: New
More
£ 99,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 112.368
Details
- Diameter [mm]: 228
- Supplementary Article / Supplementary Info Info 2: with release plate, with clutch disc
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Equipment: cover, disc
- TecDoc Engine Number: 1Z, AHU
- Condition: New
More
£ 99,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.362
Details
-
- TecDoc Engine Number: ANU
- for flywheel manufacturer: LUK
- Vehicle Identification Number (VIN) from: 1#000001
- Supplementary Article / Supplementary Info Info 2: without bearing
- Hub Profile: 21,8x24,3-23N
- Clutch Equipment: without CSC
- Condition: New
More
£ 100,27
incl. 20% VAT, excl. delivery costs
In stock
Details
£ 104,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: KC304
Details
- for OE number: 038 141 025 R
- for manufacturer number: KC304
- Condition: New
More
£ 107,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 07.23.150
Details
- Diameter [mm]: 240
- for OE number: 3000 846 201
- Condition: New
More
£ 119,13
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: F1G126NX
Details
-
- Engine Code: 1Z,AHU
- Mounting Time (in hours): 4,50
- Diameter [mm]: 228
- Number of Teeth: 23
- for components see parts list
- Condition: New
More
£ 120,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: F1A062NX
Details
-
- Engine Code: ANU
- Vehicle Identification Number (VIN) from: 7M-1-510 001
- Mounting Time (in hours): 4,50
- Diameter [mm]: 240
- Number of Teeth: 23
- for components see parts list
- Condition: New
More
£ 121,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JT6574
Details
-
- TecDoc Engine Number: 1Z, AHU
- Construction Year to: 08/2000
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: without central slave cylinder
- Hub Profile: 23.3x26.3
- Multi-piece: two-piece
- Clutch Pressure Plate Outer Diameter [mm]: 228
- Friction Lining Outer Diameter 1 [mm]: 228
- Condition: New
More
£ 128,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKCK-0100883
Details
-
- Engine Code: ANU
- Vehicle Identification Number (VIN) from: 1#000001
- for flywheel manufacturer: LuK
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate
- Multi-piece: three-piece
- Condition: New
More
£ 132,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 112.369
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with release plate, with clutch disc
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Clutch Equipment: cover, disc
- TecDoc Engine Number: ANU
- Condition: New
More
£ 137,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: JT1150
Details
-
- TecDoc Engine Number: ANU
- Vehicle Identification Number (VIN) from: 1#510001
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: without central slave cylinder
- Hub Profile: 21.8x24.3
- Multi-piece: two-piece
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Friction Lining Outer Diameter 1 [mm]: 240
- Condition: New
More
£ 137,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 479C0882P
Details
-
- Engine Code: ANU
- Vehicle Identification Number (VIN) from: 1#000001
- for flywheel manufacturer: LuK
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
More
Article №: 1130415510
Details
-
- TecDoc Engine Number: ANU
- Engine Code: ANU
- Vehicle Identification Number (VIN) from: 1#000001
- for flywheel manufacturer: LUK
- Diameter [mm]: 240
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Specification: For rigid flywheel
- Condition: New
More
Article №: KC054
Details
-
- TecDoc Engine Number: ANU
- Vehicle Identification Number (VIN) from: 1#000001
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing, with clutch disc, with screw set
- Friction Lining Outer Diameter [mm]: 240
- for OE number: 1253762
- Condition: New
More
Showing 25 out of 188 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
