Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Wheel hub SAAB 900 I Saloon 2.0 109 hp Petrol
- Wheel bearing SAAB 900 I Saloon 2.0 109 hp Petrol
- Anti-roll bar link SAAB 900 I Saloon 2.0 109 hp Petrol
- Engine mount SAAB 900 I Saloon 2.0 109 hp Petrol
- Track rod end SAAB 900 I Saloon 2.0 109 hp Petrol
- Inner tie rod SAAB 900 I Saloon 2.0 109 hp Petrol
- Ball joint SAAB 900 I Saloon 2.0 109 hp Petrol
- Wheel bolts and wheel nuts SAAB 900 I Saloon 2.0 109 hp Petrol
- Wheel spacers SAAB 900 I Saloon 2.0 109 hp Petrol
- Steering rack boot SAAB 900 I Saloon 2.0 109 hp Petrol
- Spring cap 900 2.0 109 hp Petrol
- Towbar / parts
- Wiper and washer system
Wheel hub SAAB 900 I Saloon 2.0 109 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
SAAB 900 I (AC4, AM4) 2.0 year of manufacture 1983, 109 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 110
- Number of Holes: 5
- Inner Diameter [mm]: 29
- Width [mm]: 82
- Diameter [mm]: 137, 39
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Supplementary Article / Supplementary Info Info 2: with integrated wheel bearing, with integrated ABS sensor
- Number of Holes: 5
- Braking/Drive Dynamics: for vehicles with ABS
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Rim Hole Number: 5
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Bolt Hole Circle Ø [mm]: 120
- Number of Teeth, ABS ring: 96
- Weight [kg]: 4,634
- Diameter [mm]: 157
- Number of flange connections: 3
- Thread Size: M14 x 1.5
- Inner Diameter 2 [mm]: 33
- Width 1 [mm]: 83,5
- Condition: New
Over 100 in stock