Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Saab 9-3 Convertible YS3F 1.9TTiD 160 hp Diesel
- Brake pads Saab 9-3 Convertible YS3F 1.9TTiD 160 hp Diesel
- Brake caliper Saab 9-3 Convertible YS3F 1.9TTiD 160 hp Diesel
- ABS sensor Saab 9-3 Convertible YS3F 1.9TTiD 160 hp Diesel
- Brake caliper repair kit Saab 9-3 Convertible YS3F 1.9TTiD 160 hp Diesel
- Handbrake Saab 9-3 Convertible YS3F 1.9TTiD 160 hp Diesel
- Brake disc back plate Saab 9-3 Convertible YS3F 1.9TTiD 160 hp Diesel
- Brake pad wear sensor Saab 9-3 Convertible YS3F 1.9TTiD 160 hp Diesel
- Master cylinder Saab 9-3 Convertible YS3F 1.9TTiD 160 hp Diesel
- Brake caliper carrier Saab 9-3 Convertible YS3F 1.9TTiD 160 hp Diesel
- Brake hose 9-3 1.9TTiD 160 hp Diesel
- Handbrake cable 9-3 1.9TTiD 160 hp Diesel
- Guide sleeve kit, brake caliper 9-3 1.9TTiD 160 hp Diesel
- Handbrake shoes 9-3 1.9TTiD 160 hp Diesel
- Brake fluid 9-3 1.9TTiD 160 hp Diesel
- Brake pad fitting kit 9-3 1.9TTiD 160 hp Diesel
- Brake servo 9-3 1.9TTiD 160 hp Diesel
- Accessory kit, brake shoes 9-3 1.9TTiD 160 hp Diesel
- Brake pads and discs 9-3 1.9TTiD 160 hp Diesel
- Brake light switch 9-3 1.9TTiD 160 hp Diesel
- Brake caliper piston 9-3 1.9TTiD 160 hp Diesel
- Brake disc bolts 9-3 1.9TTiD 160 hp Diesel
- High-performance brake pads 9-3 1.9TTiD 160 hp Diesel
- Handbrake repair kit 9-3 1.9TTiD 160 hp Diesel
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake hose Saab 9-3 Convertible YS3F 1.9 TTiD 160 hp Diesel
Article №: 83B0009
Details
-
- Construction Year to: 06/2012
- Required quantity: 2
- Fitting Position: Rear Axle
- Fitting Position: Rear Axle both sides
- Length [mm]: 315
- Internal Thread [mm]: M10x1
- Supplementary Article / Supplementary Info Info 2: without banjo bolt
- Flange Hole Diameter [mm]: 12
- Condition: New
More
£ 8,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 83B0207
Details
- Fitting Position: Front Axle, Front axle both sides
- Length [mm]: 412
- Thread Size 2: INN. M10x1
- Overall Length [mm]: 437
- Hydraulic connector diameter [mm]: 10
- Spanner Size 1 [mm]: 15
- Condition: New
More
£ 11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 83B0696
Details
- Fitting Position: Rear Axle both sides
- Length [mm]: 315
- Internal Thread [mm]: M10x1
- Supplementary Article / Supplementary Info Info 2: without banjo bolt
- Flange Hole Diameter [mm]: 12
- Condition: New
More
£ 17,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 83B0867
Details
- Fitting Position: Front axle both sides
- Length [mm]: 412
- Thread Size 2: INN. M10x1
- Overall Length [mm]: 437
- Hydraulic connector diameter [mm]: 10
- Spanner Size 1 [mm]: 15
- Condition: New
More
£ 23,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: R-H0541
Details
-
- Fitting Position: Front Axle
- Required quantity: 2
- Length [mm]: 414
- Weight [kg]: 0,139
- Condition: New
More
£ 7,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SL 6307
Details
- Fitting Position: Rear Axle Left, Left
- Length [mm]: 323
- Thread Size 1: INN M10x1.0
- Thread Size 2: BANJO 12.0 mm
- Weight [kg]: 0,1
- paired article number: SL 6308
- Condition: New
More
£ 8,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBH-0820008
Details
-
- Construction Year to: 06/2012
- Required quantity: 2
- Fitting Position: Rear Axle
- Fitting Position: Rear Axle both sides
- Length [mm]: 315
- Internal Thread [mm]: M10x1
- Supplementary Article / Supplementary Info Info 2: without banjo bolt
- Flange Hole Diameter [mm]: 12
- Condition: New
More
£ 8,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 172500
Details
- Fitting Position: Rear Axle Left, Rear Axle Right
- Length [mm]: 302
- Weight [kg]: 0,086
- Observe service information
- Internal Thread Size: M10 x 1
- Condition: New
More
£ 8,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6T48058
Details
- Fitting Position: Rear Axle, Left, Right
- Thread Size 1: M10X1
- Thread Size 2: BANJO D.12, 12
- Condition: New
More
£ 9,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1261601800
Details
- Fitting Position: Front Axle
- Length [mm]: 412
- Thread Size 1: M12x1
- Thread Size 2: M10x1
- Construction Year to: 06/2012
- Supplementary Article / Supplementary Info: with banjo fitting
- Condition: New
More
£ 10,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 120082010
Details
-
- Fitting Position: Rear Axle Left, Rear Axle Right
- Construction Year to: 06/2012
- Length [mm]: 337
- Internal Thread [mm]: M10X1
- Thread Size: 12
- Connector type: Banjo
- Condition: New
More
£ 10,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6T48461
Details
- Fitting Position: Rear Axle Left
- Length [mm]: 315
- Thread Size 1: F10x1
- Thread Size 2: 10
- for article number: 6T48461
- Condition: New
More
£ 11,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6T48462
Details
- Fitting Position: Rear Axle Right
- Length [mm]: 315
- Thread Size 1: F10x1
- Thread Size 2: 10
- Condition: New
More
£ 11,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBH-0820207
Details
- Fitting Position: Front Axle, Front axle both sides
- Length [mm]: 412
- Thread Size 2: INN. M10x1
- Overall Length [mm]: 437
- Hydraulic connector diameter [mm]: 10
- Spanner Size 1 [mm]: 15
- Condition: New
More
£ 11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V40-4116
Details
-
- Fitting Position: Front Axle
- Construction Year to: 06/2012
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front
- Length [mm]: 436
- Weight [kg]: 0,115
- Thread Size: M10 x 1
- Packaging width [cm]: 2
- Packaging height [cm]: 2
- Packaging Depth [cm]: 43,6
- Condition: New
More
£ 11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SL 5696
Details
- Fitting Position: Front Axle, Left, Right
- Length [mm]: 425
- Thread Size 1: BANJO 12.0 mm
- Thread Size 2: INN M10x1.0
- Weight [kg]: 0,14
- Condition: New
More
£ 12,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 58.009
Details
- Fitting Position: Rear Axle Left
- Length [mm]: 284
- Thread Type: with internal thread
- Thread Size: M10x1
- Condition: New
More
£ 13,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6T48058
Details
- Fitting Position: Rear Axle, Left, Right
- Thread Size 1: M10X1, F10x1
- Thread Size 2: 12
- Condition: New
More
£ 13,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 35SKV076
Details
- Fitting Position: Front Axle, Left, Right
- Length [mm]: 425
- Internal Thread [mm]: M10x1
- Construction Year to: 06/2012
- Weight [kg]: 0,15
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£ 14,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 52-0274
Details
- Fitting Position: Front Axle
- Length [mm]: 425
- Spanner Size: 15
- Internal Thread [mm]: M10 x 1
- Construction Year to: 12/2007
- Weight [kg]: 0,130
- Condition: New
More
£ 15,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 853672
Details
-
- Fitting Position: Front Axle, Left, Right
- Construction Year to: 12/2011
- Length [mm]: 430
- Net weight [kg]: 0,16
- Condition: New
More
£ 15,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1170234
Details
- Fitting Position: Front Axle
- Length [mm]: 425
- Thread Size 1: BANJO 12.0 mm
- Thread Size 2: INN. M10x1
- Condition: New
More
£ 15,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 58.010
Details
- Fitting Position: Rear Axle Right
- Length [mm]: 284
- Thread Type: with internal thread
- Thread Size: M10x1
- Condition: New
More
£ 15,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBH-0820696
Details
- Fitting Position: Rear Axle both sides
- Length [mm]: 315
- Internal Thread [mm]: M10x1
- Supplementary Article / Supplementary Info Info 2: without banjo bolt
- Flange Hole Diameter [mm]: 12
- Condition: New
More
£ 17,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBH-0820867
Details
- Fitting Position: Front axle both sides
- Length [mm]: 412
- Thread Size 2: INN. M10x1
- Overall Length [mm]: 437
- Hydraulic connector diameter [mm]: 10
- Spanner Size 1 [mm]: 15
- Condition: New
More
£ 23,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 75 products
Show the next items
- 1
- 2
- 3
