-
Bestsellers
-
Body
-
Brakes
-
Damping
-
Drive shaft and cv joint
-
Electrics
-
Engine
-
Engine cooling system
-
Exhaust
-
Filters
-
Fuel supply system
-
Gaskets and sealing rings
-
Gearbox
-
Ignition and preheating
-
Oils and fluids
-
Sensors, relays, control units
-
Steering
-
Suspension
-
Wiper and washer system
Parts ROVER RV8 Convertible 4.0 190 hp
-
Oil filter
-
Spark plugs
-
Fuel filter
-
Tappet
-
Cv boot
-
Rocker cover gasket
-
Brake fluid
-
Valve stem seals
-
Head gasket
-
Intake manifold gasket
-
Starter motor
-
Alternator
Body
Top
A-Z
-
Headlights
-
Daytime running lights
-
Licence plate holder / bracket
Damping
Top
A-Z
-
Shock absorber
-
Top strut mount and bearing
Engine
Top
A-Z
Fuel supply system
Top
A-Z
-
Fuel filter
Gaskets and sealing rings
Top
A-Z
-
Rocker cover gasket
-
Head gasket
-
Valve stem seals
-
Intake manifold gasket
-
Exhaust manifold gasket
-
Crankshaft seal
-
Sump gasket
-
Crankcase gasket
-
Full gasket set, engine
-
Door seal
Gearbox
Top
A-Z
-
Automatic transmission filter
Oils and fluids
Top
A-Z
-
Brake fluid
-
Engine coolant
-
Screenwash
Sensors, relays, control units
Top
A-Z
-
Tyre pressure sensor (TPMS)
Steering
Top
A-Z
-
Track rod end
Suspension
Top
A-Z
-
Wheel bearing
-
Anti-roll bar link
-
Wheel hub
-
Tyre pressure sensor (TPMS)
Wiper and washer system
Top
A-Z
-
Wiper blades
-
Screenwash
Automotive products for ROVER RV8 Convertible 4.0 1992 year, 190 hp

incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Wheel Side
- Height [mm]: 146
- Inner Diameter 2 [mm]: 22, 86
- Joint Type: Universal Joint
- Supplementary Article / Supplementary Info Info 2: with clamps
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Temperature range from [°C]: -35
- Manufacturer recommendations: ASTM D3306, ASTM D1384, CUNA NC 956/16, SAE J1034 BS 6580-20, NF R 15601 type 1, DAIMLER DBL 7700.30, MAN 324-SNF, VAG TL-774 D, MTU MTL 5048, VAG TL-774 F
- Capacity [litre]: 5
- Colour: red
- Product line: PROTECTIV 50
- Specification: G12
- Properties: Ready mixed
- Coolant manufacturer recommendation: G12
- Temperature range to [°C]: 145
- Chemical Properties: Phosphate free, Amine free, Free of silicate, Borate free
- Weight [kg]: 5,3
- Packing Type: Canister
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Filter type: Filter Insert
- Height [mm]: 156
- Diameter [mm]: 74, 81
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Filter type: Spin-on Filter
- Height [mm]: 97
- Thread Size: 3/4-16 UNF
- Inner Diameter 2 [mm]: 62
- Bypass Valve Opening Pressure [bar]: 1,2
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 96, 97
- Outer Diameter 2 [mm]: 72
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Required quantity: 8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Packing Type: Tube
- Contents [g]: 35
- Capacity [ml]: 35
- Colour: transparent
- Chemical Properties: Long-term Protection, high corrosion protection, Heat-resistant, Water-repellent, Saltwater-Resistant, not metalliferous, Silicon-free
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Packing Type: Blister Pack, Bag
- Capacity [ml]: 400
- Quantity Unit: Millilitre
- Colour: black
- Chemical Properties: hardening, High-module
- Processing time [minutes]: 20
- Tightening Torque [N/mm²]: 7,5
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Quantity: 159
- Nominal Size [mm]: 4,5
- Pipe length [mm]: 2500
- for pipe diameter [mm]: 3, 4
- Material: POM (Polyoxymethylene), Polyamid 6, EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info Info 2: with connecting pipe, with adapter
- Supplementary Article / Supplementary Info: with gaskets/seals
- Version: NW 4,5mm -> 3,0mm, NW 4,5mm -> 4,0mm
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- Required quantity: 2
- Block 1.12 [engine from_to]: 40D
- Length [mm]: 475
- Width [mm]: 120
- Weight [g]: 25,721
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Operating Mode: Hydraulic
- Required quantity: 16
- Fitting Position: Exhaust Side, Intake Side
- Diameter [mm]: 21,4
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- Fitting Position: transmission sided
- Block 1.12 [engine from_to]: 40D
- Inner Diameter [mm]: 82
- Height [mm]: 12
- Diameter [mm]: 98,5
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Thickness [mm]: 1,2
- Length [mm]: 160
- Width [mm]: 90
- Required quantity: 4
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £140 within the UK
Fast delivery