Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Rover 25 RF 1.4 16V 84 hp Petrol
- Brake pads Rover 25 RF 1.4 16V 84 hp Petrol
- Brake caliper Rover 25 RF 1.4 16V 84 hp Petrol
- Drum brake Rover 25 RF 1.4 16V 84 hp Petrol
- ABS sensor Rover 25 RF 1.4 16V 84 hp Petrol
- Brake caliper repair kit Rover 25 RF 1.4 16V 84 hp Petrol
- Handbrake Rover 25 RF 1.4 16V 84 hp Petrol
- Brake caliper carrier Rover 25 RF 1.4 16V 84 hp Petrol
- Brake shoes Rover 25 RF 1.4 16V 84 hp Petrol
- Brake hose Rover 25 RF 1.4 16V 84 hp Petrol
- Master cylinder 25 1.4 16V 84 hp Petrol
- Brake drum 25 1.4 16V 84 hp Petrol
- Handbrake cable 25 1.4 16V 84 hp Petrol
- Guide sleeve kit, brake caliper 25 1.4 16V 84 hp Petrol
- Handbrake shoes 25 1.4 16V 84 hp Petrol
- Brake fluid 25 1.4 16V 84 hp Petrol
- Brake pad fitting kit 25 1.4 16V 84 hp Petrol
- Brake set, drum brakes 25 1.4 16V 84 hp Petrol
- Wheel cylinder 25 1.4 16V 84 hp Petrol
- Accessory kit, brake shoes 25 1.4 16V 84 hp Petrol
- Brake pads and discs 25 1.4 16V 84 hp Petrol
- Brake light switch 25 1.4 16V 84 hp Petrol
- Abs ring 25 1.4 16V 84 hp Petrol
- Brake caliper piston 25 1.4 16V 84 hp Petrol
- Master cylinder repair kit 25 1.4 16V 84 hp Petrol
- Performance brake discs 25 1.4 16V 84 hp Petrol
- Abs pump 25 1.4 16V 84 hp Petrol
- Handbrake repair kit 25 1.4 16V 84 hp Petrol
- Repair kit, wheel brake cylinder 25 1.4 16V 84 hp Petrol
- Control unit, brake / driving dynamics 25 1.4 16V 84 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Rover 25 RF 1.4 16V 84 hp Petrol
Article №: BS-0830C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Hole Arrangement/Number: 4/8
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 61
- Height [mm]: 48,4
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£ 56,78
£ 20,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF492C
Details
- Product line: PREMIER Coat+ disc
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,2
- Height [mm]: 44,6
- Weight [kg]: 5,35
- Surface: Coated
- Tightening Torque [Nm]: 108
- for OE number: 45251SK7A00
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packaging length [cm]: 27,5
- Packaging width [cm]: 27,5
- Packaging height [cm]: 12,5
- Drilled: no
- Condition: New
More
£ 26,03
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5509.11
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64
- Height [mm]: 45
- Surface: Coated
- Tightening Torque [Nm]: 108
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 27,43
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.6918.11
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11
- Centering Diameter [mm]: 64
- Height [mm]: 45
- Surface: Coated
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 27,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 R80
Details
-
- Construction Year from: 02/2000
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,13
- Height [mm]: 44,8
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,7
- Drilled: no
- Condition: New
More
£ 28,36
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0113-0198.1
Details
- Fitting Position: Front Axle
- Diameter [mm]: 262,0
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Brake Disc Thickness [mm]: 13,0
- Minimum thickness [mm]: 11,0
- Centering Diameter [mm]: 64,2
- Inner Diameter [mm]: 141,0
- Height [mm]: 44,5
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0165/0636
- Bore Diameter [mm]: 13,0
- Drilled: no
- Condition: New
More
-58%
compared to RRP:
£ 70,04
£ 28,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 103-121
Details
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/08
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,2
- Inner Diameter [mm]: 141
- Height [mm]: 44,7
- Weight [kg]: 5,1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-72%
compared to RRP:
£ 105,26
£ 29,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 B23
Details
-
- Construction Year from: 02/2000
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: Vented, internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,15
- Height [mm]: 44,7
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Condition: New
More
£ 29,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0110-0212.1
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Brake Disc Thickness [mm]: 10,0
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 61,0
- Inner Diameter [mm]: 154,5
- Height [mm]: 48,1
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0165/1150
- Bore Diameter [mm]: 13,0
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-63%
compared to RRP:
£ 85,00
£ 31,15
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 673166
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Rim Hole Number: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Height [mm]: 48,4
- Weight [kg]: 7,03
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 2
- No. of holes 1: 2
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without integrated wheel bearing
- Condition: New
More
£ 33,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92060903
Details
- Product line: PRO
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/08
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,2
- Inner Diameter [mm]: 141
- Height [mm]: 44,7
- Weight [kg]: 5,1
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
-61%
compared to RRP:
£ 86,82
£ 33,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 60426C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 261,7
- Brake Disc Type: Vented
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 64
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Height [mm]: 45
- Surface: Painted
- Tightening Torque [Nm]: 108
- for OE number: 45251TARG00
- Drilled: no
- Condition: New
More
£ 36,26
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 174
Details
-
- Construction Year from: 02/2000
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: Vented, internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,15
- Height [mm]: 44,7
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Condition: New
More
£ 37,19
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 673439
Details
- Fitting Position: Front Axle
- Diameter [mm]: 261
- Brake Disc Type: solid
- Rim Hole Number: 4
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11
- Height [mm]: 44,6
- Weight [kg]: 9,08
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 2
- No. of holes 1: 2
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without integrated wheel bearing
- Condition: New
More
£ 38,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0121-0105.1
Details
- Fitting Position: Front Axle
- Diameter [mm]: 262,0
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Brake Disc Thickness [mm]: 21,0
- Minimum thickness [mm]: 19,0
- Centering Diameter [mm]: 64,1
- Inner Diameter [mm]: 141,0
- Height [mm]: 44,7
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0115/0444
- Bore Diameter [mm]: 13,0
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-52%
compared to RRP:
£ 80,58
£ 38,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8120 40113C
Details
- Product line: COATED
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,2
- Height [mm]: 44,6
- Drilled: no
- Condition: New
More
-63%
compared to RRP:
£ 109,30
£ 39,52
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5509.75
Details
- Product line: Xtra
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented, slotted
- Number of Holes: 4
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64
- Height [mm]: 45
- Surface: Coated
- Tightening Torque [Nm]: 108
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 42,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 280.3153.20
Details
- Product line: COAT Z
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Rim Hole Number: 4
- Hole Arrangement/Number: 8/4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64
- Height [mm]: 44
- Weight [kg]: 5
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
-60%
compared to RRP:
£ 108,11
£ 42,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: J3304026
Details
-
- Fitting Position: Front Axle
- Observe technical data
- Diameter [mm]: 261,6
- Brake Disc Type: internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Inner Diameter [mm]: 140,7
- Hub Diameter [mm]: 64,15
- Height [mm]: 44,7
- Surface: Coated
- No. of holes 1: 2
- No. of holes 2: 2
- fulfils ECE norm: E1 90R-02C0064/0297
- Drilled: no
- Condition: New
More
-40%
compared to RRP:
£ 80,15
£ 47,42
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5509.1X
Details
- Product line: Xtra
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: perforated/vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19,5
- Centering Diameter [mm]: 64
- Height [mm]: 45
- Surface: Coated
- Tightening Torque [Nm]: 108
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£ 51,14
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 280.3153.52
Details
- Product line: SPORT COAT Z
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 4
- Hole Arrangement/Number: 8/4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64
- Height [mm]: 44
- Weight [kg]: 5
- Surface: Coated
- Test Mark: KBA 60872
- Drilled: yes
- Condition: New
More
-70%
compared to RRP:
£ 179,42
£ 52,54
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-4510C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Hole Arrangement/Number: 4/8
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11
- Centering Diameter [mm]: 64
- Height [mm]: 44,6
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 78,58
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 280.3153.53
Details
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented, slotted
- Rim Hole Number: 4
- Hole Arrangement/Number: 8/4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64
- Height [mm]: 44
- Weight [kg]: 4,8
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- directional
- Condition: New
More
£ 81,83
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-2240C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 4/8
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,2
- Height [mm]: 44,7
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 111,13
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3463200209
Details
- Supplementary Info: QH
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Hole Arrangement/Number: 8/4
- Brake Disc Thickness [mm]: 10
- Drilled: no
- Condition: New
More
£ 12,55
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 269 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
