Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Rover 200 RF 220D/SD 86 hp Diesel
- Brake pads Rover 200 RF 220D/SD 86 hp Diesel
- Brake caliper Rover 200 RF 220D/SD 86 hp Diesel
- Drum brake Rover 200 RF 220D/SD 86 hp Diesel
- ABS sensor Rover 200 RF 220D/SD 86 hp Diesel
- Brake caliper repair kit Rover 200 RF 220D/SD 86 hp Diesel
- Handbrake Rover 200 RF 220D/SD 86 hp Diesel
- Brake caliper carrier Rover 200 RF 220D/SD 86 hp Diesel
- Brake shoes Rover 200 RF 220D/SD 86 hp Diesel
- Brake hose Rover 200 RF 220D/SD 86 hp Diesel
- Master cylinder 200 220D/SD 86 hp Diesel
- Brake drum 200 220D/SD 86 hp Diesel
- Handbrake cable 200 220D/SD 86 hp Diesel
- Guide sleeve kit, brake caliper 200 220D/SD 86 hp Diesel
- Handbrake shoes 200 220D/SD 86 hp Diesel
- Brake fluid 200 220D/SD 86 hp Diesel
- Brake pad fitting kit 200 220D/SD 86 hp Diesel
- Brake servo 200 220D/SD 86 hp Diesel
- Brake set, drum brakes 200 220D/SD 86 hp Diesel
- Wheel cylinder 200 220D/SD 86 hp Diesel
- Accessory kit, brake shoes 200 220D/SD 86 hp Diesel
- Brake pads and discs 200 220D/SD 86 hp Diesel
- Brake light switch 200 220D/SD 86 hp Diesel
- Brake shoe adjuster 200 220D/SD 86 hp Diesel
- Brake caliper piston 200 220D/SD 86 hp Diesel
- Master cylinder repair kit 200 220D/SD 86 hp Diesel
- Abs pump 200 220D/SD 86 hp Diesel
- Handbrake repair kit 200 220D/SD 86 hp Diesel
- Repair kit, wheel brake cylinder 200 220D/SD 86 hp Diesel
- Control unit, brake / driving dynamics 200 220D/SD 86 hp Diesel
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Rover 200 RF 2.0 D/SD 86 hp Diesel
Article №: BS-0830C
Details
-
- Construction Year from: 01/1996
- Braking/Drive Dynamics: for vehicles with ABS
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Hole Arrangement/Number: 4/8
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 61
- Height [mm]: 48,4
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 20,56
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.6918.11
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11
- Centering Diameter [mm]: 64
- Height [mm]: 45
- Surface: Coated
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 R80
Details
-
- Construction Year from: 03/1996
- Fitting Position: Front Axle
- Braking System: for vehicles with disc brakes on the rear axle
- Diameter [mm]: 262
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,13
- Height [mm]: 44,8
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,7
- Drilled: no
- Condition: New
More
£ 30,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 B23
Details
-
- Construction Year from: 03/1996
- Fitting Position: Front Axle
- Braking System: for vehicles with disc brakes on the rear axle
- Diameter [mm]: 262
- Brake Disc Type: Vented, internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,15
- Height [mm]: 44,7
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0113-0198.1
Details
-
- Construction Year from: 01/1996
- Fitting Position: Front Axle
- Diameter [mm]: 262,0
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Brake Disc Thickness [mm]: 13,0
- Minimum thickness [mm]: 11,0
- Centering Diameter [mm]: 64,2
- Inner Diameter [mm]: 141,0
- Height [mm]: 44,5
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0165/0636
- Bore Diameter [mm]: 13,0
- Drilled: no
- Condition: New
More
£ 31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5509.11
Details
-
- Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Product line: Prime
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64
- Height [mm]: 45
- Surface: Coated
- Tightening Torque [Nm]: 108
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 103-121
Details
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/08
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,2
- Inner Diameter [mm]: 141
- Height [mm]: 44,7
- Weight [kg]: 5,1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£ 32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0110-0212.1
Details
-
- Construction Year from: 01/1996
- Braking/Drive Dynamics: for vehicles with ABS
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Brake Disc Thickness [mm]: 10,0
- Minimum thickness [mm]: 8,0
- Centering Diameter [mm]: 61,0
- Inner Diameter [mm]: 154,5
- Height [mm]: 48,1
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0165/1150
- Bore Diameter [mm]: 13,0
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 174
Details
-
- Construction Year from: 03/1996
- Fitting Position: Front Axle
- Braking System: for vehicles with disc brakes on the rear axle
- Diameter [mm]: 262
- Brake Disc Type: Vented, internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,15
- Height [mm]: 44,7
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Condition: New
More
£ 33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 22 91 7945
Details
- Fitting Position: Front Axle
- Diameter [mm]: 261,5
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 44,6
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11
- Centering Diameter [mm]: 64,2
- Weight [kg]: 4,8
- Surface: Coated
- Number of mounting bores: 2
- Braking System: for vehicles with drum brakes on the rear axle
- Drilled: no
- Condition: New
More
£ 34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 673166
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Construction Year to: 11/1999
- Rim Hole Number: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Height [mm]: 48,4
- Weight [kg]: 7,03
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 2
- No. of holes 1: 2
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without integrated wheel bearing
- Condition: New
More
£ 35,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92060903
Details
- Product line: PRO
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/08
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,2
- Inner Diameter [mm]: 141
- Height [mm]: 44,7
- Weight [kg]: 5,1
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
£ 35,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 673439
Details
-
- Construction Year to: 11/1999
- Braking/Drive Dynamics: for vehicles without ABS
- Fitting Position: Front Axle
- Diameter [mm]: 261
- Brake Disc Type: solid
- Rim Hole Number: 4
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11
- Height [mm]: 44,6
- Weight [kg]: 9,08
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 2
- No. of holes 1: 2
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without integrated wheel bearing
- Condition: New
More
£ 41,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8120 40113C
Details
-
- Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Product line: COATED
- Diameter [mm]: 262
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,2
- Height [mm]: 44,6
- Drilled: no
- Condition: New
More
£ 42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0121-0105.1
Details
-
- Construction Year from: 01/1996
- Fitting Position: Front Axle
- Diameter [mm]: 262,0
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Brake Disc Thickness [mm]: 21,0
- Minimum thickness [mm]: 19,0
- Centering Diameter [mm]: 64,1
- Inner Diameter [mm]: 141,0
- Height [mm]: 44,7
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0115/0444
- Bore Diameter [mm]: 13,0
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 44,20
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5509.75
Details
-
- Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Product line: Xtra
- Diameter [mm]: 262
- Brake Disc Type: internally vented, slotted
- Number of Holes: 4
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64
- Height [mm]: 45
- Surface: Coated
- Tightening Torque [Nm]: 108
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 44,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 280.3153.20
Details
- Product line: COAT Z
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Rim Hole Number: 4
- Hole Arrangement/Number: 8/4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64
- Height [mm]: 44
- Weight [kg]: 5
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 46,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 657
Details
-
- Construction Year to: 02/1996
- Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 262
- Brake Disc Type: Vented, internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,15
- Height [mm]: 47,2
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Condition: New
More
£ 47,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: J3304026
Details
-
- Fitting Position: Front Axle
- Observe technical data
- Diameter [mm]: 261,6
- Brake Disc Type: internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Inner Diameter [mm]: 140,7
- Hub Diameter [mm]: 64,15
- Height [mm]: 44,7
- Surface: Coated
- No. of holes 1: 2
- No. of holes 2: 2
- fulfils ECE norm: E1 90R-02C0064/0297
- Drilled: no
- Condition: New
More
£ 51,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5509.1X
Details
-
- Fitting Position: Front Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Product line: Xtra
- Diameter [mm]: 262
- Brake Disc Type: perforated/vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19,5
- Centering Diameter [mm]: 64
- Height [mm]: 45
- Surface: Coated
- Tightening Torque [Nm]: 108
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£ 55,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 280.3153.52
Details
- Product line: SPORT COAT Z
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 4
- Hole Arrangement/Number: 8/4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64
- Height [mm]: 44
- Weight [kg]: 5
- Surface: Coated
- Test Mark: KBA 60872
- Drilled: yes
- Condition: New
More
£ 57,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-4510C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: solid
- Hole Arrangement/Number: 4/8
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11
- Centering Diameter [mm]: 64
- Height [mm]: 44,6
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 84,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 280.3153.53
Details
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented, slotted
- Rim Hole Number: 4
- Hole Arrangement/Number: 8/4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64
- Height [mm]: 44
- Weight [kg]: 4,8
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- directional
- Condition: New
More
£ 88,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-2240C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 262
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 4/8
- Brake Disc Thickness [mm]: 21
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 64,2
- Height [mm]: 44,7
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 120,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3463200209
Details
- Supplementary Info: QH
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Hole Arrangement/Number: 8/4
- Brake Disc Thickness [mm]: 10
- Drilled: no
- Condition: New
More
£ 13,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 274 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
