Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs RENAULT Wind Convertible 1.2TCe (E4MF) 102 hp Petrol
- Brake pads RENAULT Wind Convertible 1.2TCe (E4MF) 102 hp Petrol
- Brake caliper RENAULT Wind Convertible 1.2TCe (E4MF) 102 hp Petrol
- ABS sensor RENAULT Wind Convertible 1.2TCe (E4MF) 102 hp Petrol
- Brake caliper repair kit RENAULT Wind Convertible 1.2TCe (E4MF) 102 hp Petrol
- Handbrake RENAULT Wind Convertible 1.2TCe (E4MF) 102 hp Petrol
- Brake disc back plate RENAULT Wind Convertible 1.2TCe (E4MF) 102 hp Petrol
- Brake caliper carrier RENAULT Wind Convertible 1.2TCe (E4MF) 102 hp Petrol
- Brake hose RENAULT Wind Convertible 1.2TCe (E4MF) 102 hp Petrol
- Master cylinder RENAULT Wind Convertible 1.2TCe (E4MF) 102 hp Petrol
- Handbrake cable WIND 1.2TCe (E4MF) 102 hp Petrol
- Guide sleeve kit, brake caliper WIND 1.2TCe (E4MF) 102 hp Petrol
- Brake fluid WIND 1.2TCe (E4MF) 102 hp Petrol
- Handbrake shoes WIND 1.2TCe (E4MF) 102 hp Petrol
- Brake pad fitting kit WIND 1.2TCe (E4MF) 102 hp Petrol
- Brake servo WIND 1.2TCe (E4MF) 102 hp Petrol
- Brake pads and discs WIND 1.2TCe (E4MF) 102 hp Petrol
- Brake light switch WIND 1.2TCe (E4MF) 102 hp Petrol
- Brake caliper piston WIND 1.2TCe (E4MF) 102 hp Petrol
- Brake disc bolts WIND 1.2TCe (E4MF) 102 hp Petrol
- Performance brake discs WIND 1.2TCe (E4MF) 102 hp Petrol
- High-performance brake pads WIND 1.2TCe (E4MF) 102 hp Petrol
- Lateral and longitudinal acceleration sensor WIND 1.2TCe (E4MF) 102 hp Petrol
- Abs pump WIND 1.2TCe (E4MF) 102 hp Petrol
- Handbrake repair kit WIND 1.2TCe (E4MF) 102 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Brake discs RENAULT Wind Convertible 1.2 TCe (E4MF) 102 hp Petrol
Article №: 82B0236
Details
- Fitting Position: Rear Axle
- Diameter: 240,1
- Brake Disc Type: solid
- Number of Holes: 4
- Wheel Bolt Bore Diameter [mm]: M12x1.5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 8
- Centering Diameter [mm]: 52,3
- Height: 80,6
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with wheel hub
- Drilled: no
- Condition: New
More
£23.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0217
Details
- Fitting Position: Front Axle
- Diameter: 279,7
- Brake Disc Type: Vented
- Number of Holes: 4/6
- Construction Year to: 12/2014
- Wheel Bolt Bore Diameter [mm]: 13,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 24
- Centering Diameter [mm]: 61,1
- Height: 43,8
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
£26.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0989
Details
- Fitting Position: Rear Axle
- Diameter: 240,1
- Brake Disc Type: solid
- Number of Holes: 4
- Wheel Bolt Bore Diameter [mm]: M12x1.5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 8
- Centering Diameter [mm]: 52,3
- Height: 80,6
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with wheel hub
- Drilled: no
- Condition: New
More
£29.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020241
Details
- Fitting Position: Rear Axle
- Diameter: 240,1
- Brake Disc Type: solid
- Number of Holes: 4
- Wheel Bolt Bore Diameter [mm]: M12x1.5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 8
- Centering Diameter [mm]: 52,3
- Height: 80,6
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with wheel hub
- Drilled: no
- Condition: New
More
£23.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 197308
Details
- Fitting Position: Rear Axle
- Diameter: 240
- Brake Disc Type: solid
- Rim Hole Number: 4
- Brake Disc Thickness: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 55
- Height: 80,6
- Weight [kg]: 4,68
- Drilled: no
- Condition: New
More
£26.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562939JC-1
Details
- Fitting Position: Rear Axle
- Diameter: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 52,3
- Height: 80
- Weight [kg]: 9,89
- Tightening Torque [Nm]: 100
- Version: JC
- Supplementary Article / Supplementary Info Info 2: without wheel bearing kit, without ABS sensor ring
- Packing Type: Box
- Packaging length [cm]: 25,5
- Packaging width [cm]: 25,5
- Packaging height [cm]: 8,5
- Drilled: no
- Condition: New
More
£26.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562103CH
Details
- Fitting Position: Front Axle
- Diameter: 280
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Height: 44
- Weight [kg]: 14,2
- Tightening Torque [Nm]: 90
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 29
- Packaging width [cm]: 29
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
£27.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562103JC
Details
- Fitting Position: Front Axle
- Diameter: 280
- Brake Disc Type: Vented
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Height: 44
- Weight [kg]: 14,2
- Surface: Coated
- Tightening Torque [Nm]: 90
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging width [cm]: 29,5
- Packaging height [cm]: 11
- Drilled: no
- Condition: New
More
£28.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19923
Details
- Fitting Position: Front Axle
- Diameter: 280
- Brake Disc Type: internally vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness: 44
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
£28.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-03-007
Details
-
- Fitting Position: Front Axle
- Construction Year to: 09/2013
- Diameter: 280
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 24
- Centering Diameter [mm]: 61
- Height: 44
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£29.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0023139
Details
- Fitting Position: Rear Axle
- Diameter: 240,1
- Brake Disc Type: solid
- Number of Holes: 4
- Wheel Bolt Bore Diameter [mm]: M12x1.5
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 8
- Centering Diameter [mm]: 52,3
- Height: 80,6
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with wheel hub
- Drilled: no
- Condition: New
More
£29.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1369C-1
Details
- Supplementary Info: PREMIER
- Fitting Position: Rear Axle
- Diameter: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 52,3
- Height: 80
- Weight [kg]: 9,89
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel bearing kit, without ABS sensor ring
- Packaging length [cm]: 24
- Packaging width [cm]: 24
- Packaging height [cm]: 6
- Drilled: no
- Condition: New
More
£29.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SD3064
Details
- Fitting Position: Rear Axle
- Diameter: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness: 8
- Brake Disc Thickness: 7
- Centering Diameter [mm]: 54908
- Weight [kg]: 4,54
- Condition: New
More
£30.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-04-072
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 09/2013
- Diameter: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness: 8
- Centering Diameter [mm]: 52,3
- Height: 80,6
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- for OE number: 86 60 001 811
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without wheel bearing kit
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£31.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF1124
Details
- Product line: PREMIER
- Fitting Position: Front Axle
- Diameter: 280
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Height: 44
- Weight [kg]: 14,2
- Surface: Oiled
- Tightening Torque [Nm]: 90
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 28,5
- Packaging width [cm]: 28,5
- Packaging height [cm]: 9,3
- Drilled: no
- Condition: New
More
£31.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4363200800
Details
- Fitting Position: Rear Axle
- Diameter: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness: 8
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel bearing kit
- Drilled: no
- Condition: New
More
£33.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17542
Details
- Fitting Position: Rear Axle
- Diameter: 240
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 52
- Hub Diameter [mm]: 136
- Height: 80,2
- Weight [kg]: 4,54
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel bearing kit
- Drilled: no
- Condition: New
More
£34.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: R1583V
Details
- Fitting Position: Front Axle
- Diameter: 280
- Brake Disc Type: internally vented
- Number of Holes: 4
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 21,8
- Height: 44
- Drilled: no
- Condition: New
More
£35.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1046
Details
- Fitting Position: Rear Axle
- Diameter: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 8
- Minimum thickness [mm]: 7
- Centering Diameter [mm]: 52,3
- Stub Axle Diameter [mm]: 25
- Height: 82,5
- Surface: Coated, Oiled
- Technical Information Number: 98200 1544 0 1 PRO
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 11,5
- Drilled: no
- Condition: New
More
£39.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0803
Details
- Fitting Position: Front Axle
- Diameter: 280
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Height: 44
- Surface: Coated, Oiled
- Test Mark: E190R-02 C0185/0609
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£40.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4363102100
Details
- Fitting Position: Front Axle
- Diameter: 280
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness: 24
- Surface: Coated
- Drilled: no
- Condition: New
More
£42.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130138
Details
- Fitting Position: Front Axle
- Diameter: 280
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Inner Diameter [mm]: 140,0
- Height: 44
- Bore Diameter [mm]: 13,6
- Drilled: no
- Condition: New
More
£43.99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130374
Details
- Fitting Position: Rear Axle
- Diameter: 240
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 8
- Minimum thickness [mm]: 7,0
- Centering Diameter [mm]: 52,3
- Inner Diameter [mm]: 55,0
- Support plate diameter [mm]: 25
- Height: 80,6
- Thread Size: M12x1,5
- Drilled: no
- Condition: New
More
£44.49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20206
Details
-
- Construction Year to: 12/2014
- Fitting Position: Front Axle
- Fitting Position: Front Axle
- Diameter: 279,7
- Brake Disc Type: Vented
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 13,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 24
- Centering Diameter [mm]: 61,1
- Height: 43,8
- Surface: Coated
- Machining: High-carbon
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
Article №: GCH20810
Details
- Fitting Position: Front Axle
- Diameter: 279,8
- Brake Disc Type: Vented
- Number of Holes: 4/6
- Wheel Bolt Bore Diameter [mm]: 13,8
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness: 24
- Centering Diameter [mm]: 61
- Height: 43,9
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
Showing 25 out of 300 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- ...
- 11
- 12
