Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Renault Twingo 1 Van 1.2 (S063, S064) 55 hp Petrol
- Turbo Renault Twingo 1 Van 1.2 (S063, S064) 55 hp Petrol
- Catalytic converter Renault Twingo 1 Van 1.2 (S063, S064) 55 hp Petrol
- Exhaust silencer Renault Twingo 1 Van 1.2 (S063, S064) 55 hp Petrol
- Mounting kit, exhaust system Renault Twingo 1 Van 1.2 (S063, S064) 55 hp Petrol
- Exhaust pipe Renault Twingo 1 Van 1.2 (S063, S064) 55 hp Petrol
- Boost pressure sensor Renault Twingo 1 Van 1.2 (S063, S064) 55 hp Petrol
- Exhaust hanger Renault Twingo 1 Van 1.2 (S063, S064) 55 hp Petrol
- Exhaust manifold gasket Renault Twingo 1 Van 1.2 (S063, S064) 55 hp Petrol
- Exhaust clamp Renault Twingo 1 Van 1.2 (S063, S064) 55 hp Petrol
- Exhaust gasket TWINGO 1.2 (S063, S064) 55 hp Petrol
- Middle silencer TWINGO 1.2 (S063, S064) 55 hp Petrol
- Clamp, exhaust system TWINGO 1.2 (S063, S064) 55 hp Petrol
- Silencer rubber TWINGO 1.2 (S063, S064) 55 hp Petrol
- Silencer mounting kit TWINGO 1.2 (S063, S064) 55 hp Petrol
- Euro1- / euro2- / d3 conversion TWINGO 1.2 (S063, S064) 55 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor Renault Twingo 1 Van 1.2 55 hp Petrol
Article №: 3922L0505
Details
-
- Engine Code: C3G 700
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Unheated
- Thread Size: M18x1,5
- Cable Length [mm]: 230
- Number of circuits: 2
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£26,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0043
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 450
- Number of circuits: 3
- External Thread [mm]: M18 x 1,5
- Number of used contacts: 3
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£28,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0219
Details
-
- Engine Code: C3G702
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 750
- Number of connectors: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£31,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0086
Details
-
- TecDoc Engine Number: C3G 700
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Unheated
- Thread Size: M18x1,5
- Cable Length [mm]: 290
- Conductor Number: 2
- Number of connectors: 2
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0197
Details
-
- TecDoc Engine Number: C3G 702
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0224
Details
-
- TecDoc Engine Number: C3G 702
- Construction Year from: 10/1993
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Number of circuits: 3, 580
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£50,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0230
Details
-
- TecDoc Engine Number: C3G 700
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Unheated
- Thread Size: M18x1,5
- Cable Length [mm]: 750
- Number of circuits: 2
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£50,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0791
Details
- Oxygen Sensor: Heated
- Exhaust System: before catalytic converter
- Thread Size: M18x1,5
- Cable Length [mm]: 400
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Voltage [V]: 12
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£62,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 120-08-062
Details
- Oxygen Sensor: Oxygen Sensor, Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 1215
- Number of circuits: 3
- Spanner Size: 22
- Connector/Clamp: Connector may need adjustment
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£22,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-003
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Vehicle type: S064
- Engine Code: C3G702
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Fabrication Number: ESL-AU-003
- Condition: New
More
£24,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140665
Details
-
- Engine Code: C3G 700
- Oxygen Sensor: Regulating Probe
- Fitting Position: Exhaust Manifold
- Oxygen Sensor: Unheated
- Thread Size: M18x1,5
- Cable Length [mm]: 230
- Number of circuits: 2
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£26,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140042
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 450
- Number of circuits: 3
- External Thread [mm]: M18 x 1,5
- Number of used contacts: 3
- Plug housing design: Plug sleeve housing
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£28,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-007
Details
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-AU-007
- Condition: New
More
£30,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-SK-000
Details
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: Front, Rear, before catalytic converter, after catalytic converter
- Transmission Type: 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission
- Fabrication Number: ESL-SK-000
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-SK-002
Details
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-SK-002
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0219P
Details
-
- Engine Code: C3G702
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 750
- Number of connectors: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£34,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-CH-003
Details
- Oxygen Sensor: Heated, Thread pre-greased
- Number of pins: 4
- Fabrication Number: ESL-CH-003
- Condition: New
More
£34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17002
Details
- Oxygen Sensor: Regulating Probe
- Number of circuits: 2
- Condition: New
More
£37,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140309
Details
-
- TecDoc Engine Number: C3G 702
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140081
Details
-
- TecDoc Engine Number: C3G 702
- Construction Year from: 10/1993
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Number of circuits: 3, 580
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£50,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140092
Details
-
- TecDoc Engine Number: C3G 700
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Unheated
- Thread Size: M18x1,5
- Cable Length [mm]: 750
- Number of circuits: 2
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£50,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220092
Details
-
- TecDoc Engine Number: C3G 702
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 750
- Number of connectors: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£64,28
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220167
Details
-
- TecDoc Engine Number: C3G 702
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£65,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220078
Details
-
- TecDoc Engine Number: C3G 702
- Construction Year from: 10/1993
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Number of circuits: 3, 580
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£81,34
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCC9220009
Details
-
- Exhaust System: before catalytic converter
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Number of circuits: 3
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
Showing 25 out of 214 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
