Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Renault Safrane 2 3.0 V6 (B54M) 167 hp Petrol
- Brake pads Renault Safrane 2 3.0 V6 (B54M) 167 hp Petrol
- Brake caliper Renault Safrane 2 3.0 V6 (B54M) 167 hp Petrol
- ABS sensor Renault Safrane 2 3.0 V6 (B54M) 167 hp Petrol
- Brake caliper repair kit Renault Safrane 2 3.0 V6 (B54M) 167 hp Petrol
- Handbrake Renault Safrane 2 3.0 V6 (B54M) 167 hp Petrol
- Brake caliper carrier Renault Safrane 2 3.0 V6 (B54M) 167 hp Petrol
- Master cylinder Renault Safrane 2 3.0 V6 (B54M) 167 hp Petrol
- Brake hose Renault Safrane 2 3.0 V6 (B54M) 167 hp Petrol
- Handbrake cable Renault Safrane 2 3.0 V6 (B54M) 167 hp Petrol
- Guide sleeve kit, brake caliper SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Brake fluid SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Brake pad fitting kit SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Brake servo SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Brake pads and discs SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Brake light switch SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Brake power regulator SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Brake caliper piston SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Brake disc bolts SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Master cylinder repair kit SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- High-performance brake pads SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Abs pump SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Repair kit, wheel brake cylinder SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Control unit, brake / driving dynamics SAFRANE 3.0 V6 (B54M) 167 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Renault Safrane 2 3.0 V6 167 hp Petrol
Article №: 82B0876
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 264,7
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 264,7
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Inner Diameter [mm]: 149,7
- Height [mm]: 51,3
- Surface: Uncoated
- Tightening Torque [Nm]: 110
- Material: Cast Iron
- Bore Diameter [mm]: 15,4
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-43%
compared to RRP:
£ 37,30
£ 21,14
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0723
Details
- Fitting Position: Front Axle
- Diameter [mm]: 279,8
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15,7
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Inner Diameter [mm]: 140
- Height [mm]: 43,9
- Surface: Uncoated
- Thread Size: 15,8
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-43%
compared to RRP:
£ 60,20
£ 34,30
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0023026
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 264,7
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 264,7
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Inner Diameter [mm]: 149,7
- Height [mm]: 51,3
- Surface: Uncoated
- Tightening Torque [Nm]: 110
- Material: Cast Iron
- Bore Diameter [mm]: 15,4
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-58%
compared to RRP:
£ 37,30
£ 15,34
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15119
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Number of Holes: 5
- Construction Year from: 08/1996
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Weight [kg]: 2,1
- Required quantity: 2
- Drilled: no
- Condition: New
More
-74%
compared to RRP:
£ 84,20
£ 21,14
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2696
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Height [mm]: 44,4
- Surface: Oiled
- Test Mark: E1 90R-02C0100/1551
- Drilled: no
- Condition: New
More
£ 21,14
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15123
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Weight [kg]: 2,1
- Drilled: no
- Condition: New
More
£ 23,02
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF556
Details
- Product line: PREMIER
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Height [mm]: 44,4
- Weight [kg]: 8,22
- Surface: Oiled
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 25,5
- Packaging width [cm]: 25,5
- Packaging height [cm]: 8,5
- Drilled: no
- Condition: New
More
£ 23,96
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 757
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 264,7
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Height [mm]: 44,3
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15
- Drilled: no
- Condition: New
More
£ 24,90
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 561596JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Height [mm]: 44,4
- Weight [kg]: 8,22
- Surface: Coated
- Tightening Torque [Nm]: 110
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 29
- Packaging width [cm]: 29
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
£ 25,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2698
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 61
- Height [mm]: 44,4
- Surface: Oiled
- Test Mark: E1 90R-02C0100/1551
- Drilled: no
- Condition: New
More
£ 25,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: R1403P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Brake System: ATE
- Height [mm]: 44
- Drilled: no
- Condition: New
More
£ 25,84
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16215
Details
-
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 265
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Hub Diameter [mm]: 160
- Height [mm]: 44
- Weight [kg]: 4
- Surface: Coated
- Drilled: no
- Condition: New
More
-64%
compared to RRP:
£ 73,77
£ 26,31
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF1029
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 11
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Height [mm]: 44
- Surface: Painted
- Thread Size: 15
- Colour: black
- Test Mark: E1 90R-02 C0190/0537
- Drilled: no
- Condition: New
More
-74%
compared to RRP:
£ 104,28
£ 26,31
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6239.02
Details
-
- Construction Year from: 09/1996
- Construction Year to: 12/1998
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Height [mm]: 44,4
- Weight [kg]: 4
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£ 28,66
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.5645.50
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10,5
- Minimum thickness [mm]: 9,5
- Centering Diameter [mm]: 66
- Height [mm]: 44
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 28,66
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BAR24171
Details
-
- Construction Year to: 07/1996
- Fitting Position: Front Axle
- Construction Year from: 08/1996
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108,0
- Brake Disc Thickness [mm]: 24,0
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61,0
- Inner Diameter [mm]: 140,0
- Height [mm]: 44
- Machining: Alloyed/High-carbon
- Bore Diameter [mm]: 15,6
- Drilled: no
- Condition: New
More
£ 29,60
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0535
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 265,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10,5
- Centering Diameter [mm]: 66,0
- Height [mm]: 44,5
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£ 31,48
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15118
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 21,8
- Required quantity: 2
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£ 112,32
£ 32,42
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022873
Details
- Fitting Position: Front Axle
- Diameter [mm]: 279,8
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15,7
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Inner Diameter [mm]: 140
- Height [mm]: 43,9
- Surface: Uncoated
- Thread Size: 15,8
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- usable for vehicles to construction year: 2016/11
- Drilled: no
- Condition: New
More
-43%
compared to RRP:
£ 60,20
£ 34,30
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6301.10
Details
-
- Construction Year from: 09/1996
- Construction Year to: 12/1998
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Height [mm]: 44
- Weight [kg]: 6,62
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£ 34,30
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6045112
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280, 280,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Rim Hole Number: 5
- Brake Disc Thickness [mm]: 24,0
- Centering Diameter [mm]: 61,0
- Height [mm]: 44
- Production Number: 6045112
- Drilled: no
- Condition: New
More
£ 35,24
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012402221-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Inner Diameter [mm]: 140
- Height [mm]: 44
- Machining: High-carbon
- Required quantity: 2
- Bore Diameter [mm]: 15,8
- Net weight [kg]: 6,45
- Gross Weight [kg]: 6,7
- Drilled: no
- Condition: New
More
-41%
compared to RRP:
£ 61,33
£ 36,18
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2002
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Height [mm]: 43,9
- Surface: Painted
- Thread Size: 15,7
- Test Mark: E190R 0202C0185/0085
- Drilled: no
- Condition: New
More
£ 37,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: R1571V
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 61
- Height [mm]: 44
- Drilled: no
- Condition: New
More
£ 37,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-1008
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 21,8
- Centering Diameter [mm]: 61
- Height [mm]: 44
- Surface: Painted
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 39,94
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 172 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
