Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs RENAULT Master I Minibus 30 2.2 91 hp Petrol
- Ignition coil RENAULT Master I Minibus 30 2.2 91 hp Petrol
- Ignition leads RENAULT Master I Minibus 30 2.2 91 hp Petrol
- Crankshaft sensor RENAULT Master I Minibus 30 2.2 91 hp Petrol
- Distributor cap RENAULT Master I Minibus 30 2.2 91 hp Petrol
- Knock sensor RENAULT Master I Minibus 30 2.2 91 hp Petrol
- Distributor rotor RENAULT Master I Minibus 30 2.2 91 hp Petrol
- Distributor and parts RENAULT Master I Minibus 30 2.2 91 hp Petrol
- Ignition module RENAULT Master I Minibus 30 2.2 91 hp Petrol
- Engine control unit (ECU) RENAULT Master I Minibus 30 2.2 91 hp Petrol
- Repair kit, distributor MASTER 30 2.2 91 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs RENAULT Master I Minibus 30 2.2 91 hp Petrol
Article №: 1516
LPG Laser Line 5, LPG5
Details
-
- TecDoc Engine Number: J7T 782
- Electrode Gap [mm]: 0,6
- Product line: LPG Laser Line
- Thread Length [mm]: 17,5
- Spanner Size: 16 mm
- Spark Plug: Iridium Middle Electrode, Fixed SAE connector
- Thread Size: M14 x 1,25
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: New
More
£19,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: Z17
14 K-7 DU, 0001635700
Details
-
- TecDoc Engine Number: J7T 788
- Required quantity: 4
- Fuel Type: Liquefied Petroleum Gas (LPG)
- Alternatively
- electrode gap to be set [mm]: 0,7
- Recommended change interval [km]: 20000
- Product line: ULTRA
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Self-service suited packaging see parts list
- Technical Information Number: 14 K-7 DU
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: Z18
14 K-7 DU0, 0001635709
Details
-
- TecDoc Engine Number: J7T 782
- Required quantity: 4
- Product line: ULTRA
- Thread Length [mm]: 17,5
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Self-service suited packaging see parts list
- Technical Information Number: 14 K-7 DU0
- Packaging length [cm]: 9
- Packaging height [cm]: 2
- Packaging width [cm]: 2
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 232 507
HR 78
Details
-
- TecDoc Engine Number: J7T 788
- Required quantity: 4
- Construction Year to: 09/1997
- Supplementary Info: Super 4
- Thread Length [mm]: 17,5
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 4
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 241 240 563
H 6 DC
Details
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 4666
BP6EF
Details
-
- TecDoc Engine Number: J7T 782
- Electrode Gap [mm]: 0,6
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3,0
- Spanner Size: 16 mm
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, no interference suppression, with taper gasket seat
- Thread Size: M14 x 1,25
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 1336
Set 4 - EAN 85 95001 , G15YC
Details
- Thread Length 1 [mm]: 17,5
- Engine Code: J7T782, J7T788
- Electrode Gap [mm]: 0,70
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode
- Thread Size: M14x1,25
- Tightening Torque [Nm]: 15
- Number of pins: 1
- Fuel Type: Petrol
- Replace after km: 30000
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: Z25
14 K-6 DU, 0001640700
Details
-
- electrode gap to be set [mm]: 0,7
- Recommended change interval [km]: 20000
- TecDoc Engine Number: J7T 782
- Required quantity: 4
- Fuel Type: Liquefied Petroleum Gas (LPG)
- Alternatively
- Product line: ULTRA
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Technical Information Number: 14 K-6 DU
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Condition: New
More
£4,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: UXT4
0002635601
Details
-
- Engine Code: J7T 782, 788
- Required quantity: 4
- Product line: Industrial
- Thread Length [mm]: 17,5
- Spanner Size: 16 mm
- Spark Plug: 4 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Tightening Torque [Nm]: 15
- Input shaft connector type: Conical
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: Z207
14 KG-8 DTU, 0001630101
Details
-
- TecDoc Engine Number: J7T 788
- Required quantity: 4
- Product line: ULTRA
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 1,2
- Spanner Size: 16 mm
- Spark Plug: 3 - Earthed Electrode, with taper seat
- Thread Size: M14x1,25
- Connector type: SAE
- Technical Information Number: 14 KG-8 DTU
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 062110320312
T7LC, T20EPR-U
Details
- Spanner Size: 16 mm
- Spark Plug: with resistor
- Thread Size: 14-,708"
- TecDoc Engine Number: J7T 782, J7T 788
- Condition: New
More
£5,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: EON3/286
EON3
Details
-
- TecDoc Engine Number: J7T 788, J7T 782
- Required quantity: 4
- Alternatively
- Supplementary Info: Screw on
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: M4/BRASS SAE
- Version: with taper seat
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
£6,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 235 700
HR 7 DP
Details
-
- electrode gap to be set [mm]: 0,8
- TecDoc Engine Number: J7T 788
- Construction Year from: 01/1994
- Construction Year to: 09/1997
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: OE036/T10
S9YCC, OE036
Details
- Product line: Powersport
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Cu-core GE
- Technical Information Number: S9YCC
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Projection [mm]: 1,5
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 240 656
HR 6 KI 332 S
Details
-
- TecDoc Engine Number: J7T 788
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Thread Length [mm]: 17,5
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 062130008312
T20TT
Details
- Thread Length [mm]: 17,5
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with resistor
- Thread Size: 14
- TecDoc Engine Number: J7T 782, J7T 788
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: OE072/T10
S10YCC, OE072
Details
-
- TecDoc Engine Number: J7T 788
- Required quantity: 4
- Product line: Powersport
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Cu-core GE
- Technical Information Number: S10YCC
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Projection [mm]: 1,6
- Condition: New
More
£8,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: CET9
Details
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1.25
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET9
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£8,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 2635600
0002635600
Details
- Product line: ULTRA X
- Condition: New
More
£11,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 246864
C11HC
Details
-
- Construction Year from: 10/1994
- Construction Year to: 09/1997
- TecDoc Engine Number: J7T 788
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Weight [kg]: 0,044
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Condition: New
More
£12,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 1575
GR15YS
Details
- Thread Length 1 [mm]: 17,5
- Engine Code: J7T782, J7T788
- Electrode Gap [mm]: 0,70
- Spanner Size: 16 mm
- Spark Plug: Silver Center Electrode
- Thread Size: M14x1,25
- Tightening Torque [Nm]: 15
- Number of pins: 1
- Fuel Type: Petrol/Liquified Petroleum Gas (LPG), CNG
- Condition: New
More
£13,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: EON3/287
Details
-
- TecDoc Engine Number: J7T 782, J7T 788
- Alternatively
- Supplementary Info: Screw on
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Self-service suited packaging see parts list
- Packing Type: Box
- Quality/ Grade: Ni125 GE
- Technical Information Number: EON3
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 10,4
- Packaging width [cm]: 3,5
- Packaging height [cm]: 2,56
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£17,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: CET9SB
CET9P
Details
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1.25
- Connector type: SAE
- Self-service suited packaging see parts list
- Packing Type: Blister Pack
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET9
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 20
- Packaging width [cm]: 10
- Packaging height [cm]: 3,2
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£20,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: OE183/R04
OE183, 9808
Details
-
- TecDoc Engine Number: J7T 788
- Required quantity: 4
- Alternatively
- Product line: Platinum CT
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,3
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Iridium Middle Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Self-service suited packaging see parts list
- Packing Type: Box
- Quality/ Grade: Pt GE
- Technical Information Number: RS8WYPB5
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 14,8
- Packaging width [cm]: 2,525
- Packaging height [cm]: 2,76
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£30,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: OE183/T10
Details
- Product line: Platinum CT
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,3
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Iridium Middle Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Pt GE
- Technical Information Number: RS8WYPB5
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 50 products
- 1
- 2
