Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
-
Heating and ventilation
- Cabin filter RENAULT Fluence (L3_) 1.5dCi (L30A) 86 hp Diesel
- Blower motor RENAULT Fluence (L3_) 1.5dCi (L30A) 86 hp Diesel
- Heater matrix RENAULT Fluence (L3_) 1.5dCi (L30A) 86 hp Diesel
- Heater resistor RENAULT Fluence (L3_) 1.5dCi (L30A) 86 hp Diesel
- Outside temperature sensor RENAULT Fluence (L3_) 1.5dCi (L30A) 86 hp Diesel
- Hose, heat exchange heating RENAULT Fluence (L3_) 1.5dCi (L30A) 86 hp Diesel
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Heater matrix RENAULT Fluence (L3_) 1.5 dCi 86 hp Diesel
Article №: 9911507
Details
- Production Number: K9911507
- Core Length [mm]: 148
- Core Width [mm]: 217
- Core Depth [mm]: 27
- Condition: New
More
£26,47
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CH3-295
Details
- Supplementary Article / Supplementary Info Info 2: without pipe
- Core Length [mm]: 150
- Core Width [mm]: 210
- Core Depth [mm]: 26
- Water Tank Material (radiator): Aluminium
- Radiator type: Brazed cooling fins
- Condition: New
More
£29,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 042-015-0020-B
Details
- Core Length [mm]: 144
- Core Width [mm]: 194
- Core Depth [mm]: 26
- Water Tank Material (radiator): Aluminium
- Radiator type: Brazed cooling fins
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: D6R020TT
Details
- Vehicle Equipment: for vehicles with/without air conditioning
- for OE number: 271159831R
- Water Tank Material (radiator): Aluminium
- Cooling fins material: Aluminium
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 148
- Core Width [mm]: 218
- Core Depth [mm]: 26
- Condition: New
More
£30,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: FT55202
Details
- Cooling fins material: Aluminium
- Core Length [mm]: 148
- Core Width [mm]: 210
- Core Depth [mm]: 26
- Condition: New
More
£40,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 43006569
Details
- Cooling fins material: Aluminium
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Aluminium
- Core Length [mm]: 150
- Core Width [mm]: 205
- Core Depth [mm]: 22
- Inlet Diameter 1 [mm]: 16,2
- Connection Diameter 1 [mm]: 16,2
- Condition: New
More
£46,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: RT6569
Details
- Cooling fins material: Aluminium
- Core Depth [mm]: 22
- Core Length [mm]: 148
- Core Width [mm]: 205
- Inlet Ø [mm]: 21,3
- Outlet Ø [mm]: 21,3
- Radiator type: Brazed cooling fins
- Supplementary Article / Supplementary Info: without pipe
- Water Tank Material (radiator): Aluminium
- Condition: New
More
£63,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 73343
Details
- Cooling fins material: Aluminium
- Core Depth [mm]: 22
- Core Length [mm]: 148
- Core Width [mm]: 205
- Inlet Ø [mm]: 21,3
- Outlet Ø [mm]: 21,3
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Aluminium
- Condition: New
More
£69,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: AH 259 000S
Details
- Cooling fins material: Aluminium
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Aluminium
- Core Length [mm]: 213
- Core Width [mm]: 148
- Core Depth [mm]: 22
- Vehicle Equipment: for vehicles with air conditioning
- Packaging width [cm]: 24,00
- Packaging length [cm]: 29,5
- Packaging height [cm]: 7,50
- Net Weight [g]: 458
- Condition: New
More
£74,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 11472
Details
- for OE number: 271A20005R
- Quantity Unit: Piece
- Weight [g]: 170
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: New
More
£6,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DNR079TT
Details
- Quantity Unit: Piece
- Weight [g]: 170
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: New
More
£9,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 02-2421
Details
- Cooling Hose: from engine to thermostat
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 140
- Inner Diameter 2 [mm]: 19, 15
- Observe broschure
- Condition: New
More
£11,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V46-1613
Details
- Quantity Unit: Piece
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Front
- Condition: New
More
£20,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 30934
Details
- Inner Diameter [mm]: 16,0
- Length [m]: 20
- Suitable For (substance/mix/gas/chemicals): Antifreeze
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info: with reinforcement
- Certificate: SAEJ20R3
- Temperature range from [°C]: -40
- Temperature range to [°C]: +120
- Condition: New
More
Article №: 2421636
Details
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Polyester
- Cooling Hose: from coolant regulator housing to distributor
- Condition: New
More
£20,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 623 350
Details
- Core Length [mm]: 148
- Core Width [mm]: 210
- Core Depth [mm]: 26
- Condition: New
More
£51,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0609.3025
Details
- Core Length [mm]: 205
- Core Width [mm]: 150
- Core Depth [mm]: 22
- Material: Aluminium
- Core Dimensions: 205 X 150 X 22 mm
- Vehicle configuration line / variant: con guarnizioni, w. gaskets
- Connector type: incastro/snap-fit
- Condition: New
More
£55,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 94040
Details
- Core Length [mm]: 205
- Core Width [mm]: 148
- Core Depth [mm]: 22
- Condition: New
More
£87,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 669229
Details
- Core Length [mm]: 148
- Core Width [mm]: 215
- Core Depth [mm]: 26
- Radiator type: Brazed cooling fins
- Condition: New
More
Article №: R12584
Details
- Cooling Hose: from engine to thermostat
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Colour: black
- Hose Length [mm]: 140
- Inner Diameter 2 [mm]: 19, 15
- Observe broschure
- Condition: New
More
£11,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MH52234
Details
- Net Weight [g]: 172
- Fitting Position: Intake Side
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: New
More
Article №: MH52233
Details
- Net Weight [g]: 222
- Fitting Position: Exhaust Side
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: New
More
Article №: 30932
Details
- Inner Diameter [mm]: 10
- Length [m]: 20
- Suitable For (substance/mix/gas/chemicals): Antifreeze
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info: with reinforcement
- Certificate: SAEJ20R3
- Temperature range from [°C]: -40
- Temperature range to [°C]: +120
- Condition: New
More
Article №: 30933
Details
- Inner Diameter [mm]: 13,0
- Length [m]: 20
- Suitable For (substance/mix/gas/chemicals): Antifreeze
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info: with reinforcement
- Certificate: SAEJ20R3
- Temperature range from [°C]: -40
- Temperature range to [°C]: +120
- Condition: New
More
Article №: 30935
Details
- Inner Diameter [mm]: 25,4
- Length [m]: 20
- Suitable For (substance/mix/gas/chemicals): Antifreeze
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info: with reinforcement
- Certificate: SAEJ20R3
- Temperature range from [°C]: -40
- Temperature range to [°C]: +120
- Condition: New
More
Showing 25 out of 27 products
