Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Renault Clio 1 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Turbo Renault Clio 1 1.2 (5/357Y, 5/357K) 58 hp Petrol
- EGR valve Renault Clio 1 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Catalytic converter Renault Clio 1 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Exhaust silencer Renault Clio 1 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Mounting kit, exhaust system Renault Clio 1 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Exhaust pipe Renault Clio 1 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Turbo gasket Renault Clio 1 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Boost pressure sensor Renault Clio 1 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Exhaust manifold gasket Renault Clio 1 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Exhaust hanger CLIO 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Exhaust gasket CLIO 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Exhaust clamp CLIO 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Middle silencer CLIO 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Clamp, exhaust system CLIO 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Silencer rubber CLIO 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Catalytic converter mounting kit CLIO 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Silencer mounting kit CLIO 1.2 (5/357Y, 5/357K) 58 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor Renault Clio 1 1.2 58 hp Petrol
Article №: 3922L0880
Details
-
- Construction Year from: 06/1996
- Construction Year to: 05/1998
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 80
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 21,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0216
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 400
- Number of pins: 4
- Number of circuits: 4
- External Thread [mm]: M18 x 1.5
- Connector Shape: round
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 28,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0791
Details
- Oxygen Sensor: Heated
- Exhaust System: before catalytic converter
- Thread Size: M18x1,5
- Cable Length [mm]: 400
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Voltage [V]: 12
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 30,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0094
Details
-
- Construction Year from: 04/1996
- Construction Year to: 02/1998
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Conductor Number: 3
- Number of connectors: 3
- Connector Shape: oval
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 35,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0219
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 750
- Number of connectors: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 35,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0197
Details
-
- Construction Year from: 04/1996
- Construction Year to: 02/1998
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0766
Details
- Oxygen Sensor: Heated
- Thread Size: M18x1,5-6e
- Cable Length [mm]: 230
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0713
Details
-
- Construction Year from: 04/1996
- Construction Year to: 02/1998
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5-6e
- Cable Length [mm]: 420
- Number of circuits: 3
- Number of connectors: 4
- Connector Shape: round
- Line insulation design: with thermal protection flexible insulating tubing
- Condition: New
More
£ 44,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0224
Details
-
- TecDoc Engine Number: D7F 730
- Oxygen Sensor: Regulating Probe
- Construction Year from: 04/1996
- Construction Year to: 02/1998
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Number of circuits: 3, 580
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 57,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140309
Details
-
- Construction Year from: 04/1996
- Construction Year to: 02/1998
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 17,87
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140388
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 400
- Number of pins: 4
- Number of circuits: 4
- External Thread [mm]: M18 x 1.5
- Connector Shape: round
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 28,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GOS-3000EX
Details
- Oxygen Sensor: Regulating Probe, Oxygen Sensor
- Number of circuits: 3
- Weight [kg]: 0,08
- Voltage [V]: 12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.)
- Condition: New
More
£ 30,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-SK-000
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: Front, Rear, before catalytic converter, after catalytic converter
- Transmission Type: 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission
- Fabrication Number: ESL-SK-000
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-007
Details
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-AU-007
- Condition: New
More
£ 31,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-011
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Fabrication Number: ESL-AU-011
- Condition: New
More
£ 32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-003
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Fabrication Number: ESL-AU-003
- Condition: New
More
£ 32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-CH-003
Details
-
- Fitting Position: Front
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated, Thread pre-greased
- Number of pins: 4
- Fabrication Number: ESL-CH-003
- Condition: New
More
£ 33,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-SK-002
Details
-
- Fitting Position: Front
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Fitting Position: after catalytic converter
- Fabrication Number: ESL-SK-002
- Condition: New
More
£ 34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0197P
Details
-
- Construction Year from: 04/1996
- Construction Year to: 02/1998
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Number of circuits: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 34,60
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0219P
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 750
- Number of connectors: 3
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 35,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140132
Details
-
- Construction Year from: 04/1996
- Construction Year to: 02/1998
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Conductor Number: 3
- Number of connectors: 3
- Connector Shape: oval
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 35,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17003
Details
- Oxygen Sensor: Regulating Probe
- Number of circuits: 3
- Condition: New
More
£ 35,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0094P
Details
-
- Construction Year from: 04/1996
- Construction Year to: 02/1998
- Oxygen Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Cable Length [mm]: 570
- Conductor Number: 3
- Number of connectors: 3
- Connector Shape: oval
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 40,36
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3922L0216P
Details
- Oxygen Sensor: Heated
- Cable Length [mm]: 400
- Number of pins: 4
- Number of circuits: 4
- External Thread [mm]: M18 x 1.5
- Connector Shape: round
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 43,92
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKLS-0140081
Details
-
- TecDoc Engine Number: D7F 730
- Oxygen Sensor: Regulating Probe
- Construction Year from: 04/1996
- Construction Year to: 02/1998
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Thread Size: M18x1,5
- Number of circuits: 3, 580
- Supplementary Article / Supplementary Info Info 2: without plug
- Connector/Clamp: Connector may need adjustment
- Supplementary Article / Supplementary Info: with cable tie, with fastening/mounting material
- Line insulation design: with silicone-coated woven-fibre insulation
- Condition: New
More
£ 57,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 180 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
