Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Puch W461 230GE 125 hp Petrol
- Ignition leads Puch W461 230GE 125 hp Petrol
- Crankshaft sensor Puch W461 230GE 125 hp Petrol
- Distributor and parts Puch W461 230GE 125 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Spark plugs Puch W461 230 GE 125 hp Petrol
Article №: 686S0033
Details
-
- Construction Year to: 09/1995
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0318
Details
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990032
Details
-
- Construction Year to: 09/1995
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0033P
Details
- Product line: Nickel
- Thread Length [mm]: 17,5
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£3,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860035
Details
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Condition: New
More
£3,88
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-19990316
Details
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3689
TR6IX
Details
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3,0
- Spanner Size: 16 mm
- Spark Plug: Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with taper gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Condition: New
More
£14,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 241 240 563
H 6 DC
Details
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: UXT4
0002635601
Details
- Product line: Industrial
- Thread Length [mm]: 17,5
- Spanner Size: 16 mm
- Spark Plug: 4 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Required quantity: 4
- Tightening Torque [Nm]: 15
- Input shaft connector type: Conical
- Condition: New
More
£5,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: EON3/286
EON3
Details
-
- Required quantity: 4
- Alternatively
- Supplementary Info: Screw on
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14x1,25
- Connector type: M4/BRASS SAE
- Version: with taper seat
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
£6,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 235 700
HR 7 DP
Details
-
- electrode gap to be set [mm]: 0,8
- Construction Year to: 09/1995
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Condition: New
More
£6,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: OE036/T10
S9YCC, OE036
Details
- Product line: Powersport
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Packing Type: Box
- Quality/ Grade: Cu-core GE
- Technical Information Number: S9YCC
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Projection [mm]: 1,5
- Condition: New
More
£7,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 2635600
0002635600
Details
- Product line: ULTRA X
- Condition: New
More
£11,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: EON3/287
Details
-
- Required quantity: 4
- Alternatively
- Supplementary Info: Screw on
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Self-service suited packaging see parts list
- Packing Type: Box
- Quality/ Grade: Ni125 GE
- Technical Information Number: EON3
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 10,4
- Packaging width [cm]: 3,5
- Packaging height [cm]: 2,56
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£16,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
