Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Puch G-Modell (W460) 280GE (460.232, 460.233) 150 hp Petrol
- Brake pads Puch G-Modell (W460) 280GE (460.232, 460.233) 150 hp Petrol
- Brake caliper Puch G-Modell (W460) 280GE (460.232, 460.233) 150 hp Petrol
- Drum brake Puch G-Modell (W460) 280GE (460.232, 460.233) 150 hp Petrol
- ABS sensor Puch G-Modell (W460) 280GE (460.232, 460.233) 150 hp Petrol
- Brake caliper repair kit Puch G-Modell (W460) 280GE (460.232, 460.233) 150 hp Petrol
- Handbrake Puch G-Modell (W460) 280GE (460.232, 460.233) 150 hp Petrol
- Brake disc back plate Puch G-Modell (W460) 280GE (460.232, 460.233) 150 hp Petrol
- Brake pad wear sensor Puch G-Modell (W460) 280GE (460.232, 460.233) 150 hp Petrol
- Brake caliper carrier Puch G-Modell (W460) 280GE (460.232, 460.233) 150 hp Petrol
- Brake shoes G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Brake hose G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Brake drum G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Master cylinder G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Handbrake cable G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Guide sleeve kit, brake caliper G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Brake fluid G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Handbrake shoes G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Brake pad fitting kit G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Brake servo G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Wheel cylinder G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Brake pads and discs G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Brake light switch G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Brake power regulator G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Brake caliper piston G-MODELL 280GE (460.232, 460.233) 150 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Brake discs Puch G-Modell (W460) 280 GE (460.232, 460.233) 150 hp Petrol
Article №: 82B0254
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 15,9
- Centering Diameter [mm]: 85
- Height [mm]: 96,6
- Surface: Uncoated
- Machining: Untreated
- Braking System: for vehicles with disc brakes on the rear axle
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-53%
compared to RRP:
£51,10
£23,91
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0425
Details
- Fitting Position: Front Axle
- Diameter [mm]: 302,8
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 16
- Centering Diameter [mm]: 85
- Height [mm]: 83
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-51%
compared to RRP:
£74,70
£36,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020259
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 15,9
- Centering Diameter [mm]: 85
- Height [mm]: 96,6
- Surface: Uncoated
- Machining: Untreated
- Braking System: for vehicles with disc brakes on the rear axle
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-63%
compared to RRP:
£51,10
£18,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.6469.20
Details
- Product line: COAT Z
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 14
- Centering Diameter [mm]: 85
- Height [mm]: 96
- Weight [kg]: 6,65
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Registration Type: permitted for vehicles of Class M1/N1
- Drilled: no
- Condition: New
More
-59%
compared to RRP:
£88,38
£35,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 111-901
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 15,9
- Minimum thickness [mm]: 14
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 160,1
- Height [mm]: 96,6
- Weight [kg]: 7
- Surface: Coated
- Technical Information Number: 54376PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-69%
compared to RRP:
£117,49
£35,87
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022109
Details
- Fitting Position: Front Axle
- Diameter [mm]: 302,8
- Brake Disc Type: solid
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 16
- Centering Diameter [mm]: 85
- Height [mm]: 83
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-51%
compared to RRP:
£74,69
£36,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15782
Details
- Fitting Position: Front Axle
- Diameter [mm]: 303
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 14,4
- Centering Diameter [mm]: 85
- Hub Diameter [mm]: 178
- Height [mm]: 83
- Weight [kg]: 8,12
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£130,21
£36,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: VKBD 90198 S1
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Number of bores: 2
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 14
- Centering Diameter [mm]: 85
- Height [mm]: 97
- Surface: Coated
- Condition: New
More
£36,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1163206000
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Surface: Coated
- Drilled: no
- Condition: New
More
-36%
compared to RRP:
£60,40
£38,17
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92137503
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/07
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 160
- Height [mm]: 96,7
- Weight [kg]: 6,3
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 29,8
- Packaging width [cm]: 29,8
- Packaging height [cm]: 21,5
- Drilled: no
- Condition: New
More
-58%
compared to RRP:
£92,83
£38,63
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD8087
Details
-
- Fitting Position: Rear Axle
- Braking System: for vehicles with disc brakes on the rear axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 85
- Height [mm]: 96,7
- Surface: Painted, Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 32
- Packaging width [cm]: 30,5
- Packaging height [cm]: 21
- Drilled: no
- Condition: New
More
£39,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 400.6468.20
Details
- Product line: COAT Z
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Rim Hole Number: 5
- Hole Arrangement/Number: 7/5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 85
- Height [mm]: 96
- Weight [kg]: 6,1
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Registration Type: permitted for vehicles of Class M1/N1
- Drilled: no
- Condition: New
More
-55%
compared to RRP:
£90,42
£40,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.5444.10
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter [mm]: 303
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 13
- Centering Diameter [mm]: 85
- Height [mm]: 83
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£40,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 215.067
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 14
- Centering Diameter [mm]: 85
- Height [mm]: 96,5
- Weight [g]: 7000
- Bore Diameter [mm]: 15
- Drilled: no
- Condition: New
More
£40,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1163206100
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 16
- Surface: Coated
- Drilled: no
- Condition: New
More
-34%
compared to RRP:
£63,10
£41,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2556
Details
-
- Fitting Position: Front Axle
- for model code: GE
- Diameter [mm]: 303
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 13
- Centering Diameter [mm]: 85
- Height [mm]: 83,1
- Surface: Oiled
- Test Mark: E1 90R-02C0100/1658
- Drilled: no
- Condition: New
More
£41,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 128-411
Details
- Product line: PRO High Carbon
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 15,9
- Minimum thickness [mm]: 14
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 160,1
- Height [mm]: 96,6
- Weight [kg]: 7
- Surface: Coated
- Machining: High-carbon
- Technical Information Number: 54376PRO_HC
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£124,63
£41,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: TX 70-35
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 14
- Centering Diameter [mm]: 85
- Height [mm]: 97
- Weight [kg]: 7,45
- Surface: Painted
- Drum diameter [mm]: 160
- Drilled: no
- Condition: New
More
£43,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD3675
Details
-
- Fitting Position: Rear Axle
- Braking System: for vehicles with disc brakes on the rear axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 15,9
- Minimum thickness [mm]: 14
- Centering Diameter [mm]: 85
- Height [mm]: 96,6
- Surface: Painted, Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 32
- Packaging width [cm]: 30,5
- Packaging height [cm]: 21
- Drilled: no
- Condition: New
More
£43,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SD5712
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 7
- Bolt Hole Circle Ø [mm]: 130
- Thickness [mm]: 15,9
- Brake Disc Thickness [mm]: 14
- Centering Diameter [mm]: 85
- Height [mm]: 96,6
- Weight [kg]: 6,93
- Condition: New
More
£44,15
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6041140
Details
- Fitting Position: Front Axle
- Diameter [mm]: 303
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 16
- Centering Diameter [mm]: 85
- Height [mm]: 83
- Production Number: K6041140
- Drilled: no
- Condition: New
More
£49,21
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24011601331-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 303
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 13,0
- Centering Diameter [mm]: 85
- Inner Diameter [mm]: 158,5
- Height [mm]: 83
- Required quantity: 2
- Bore Diameter [mm]: 15,0
- Net weight [kg]: 8,10
- Gross Weight [kg]: 8,30
- Drilled: no
- Condition: New
More
-31%
compared to RRP:
£82,07
£56,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4.63998
Details
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 85
- Height [mm]: 77
- Bore Diameter [mm]: 15
- Net Weight [g]: 6480
- Drilled: no
- Condition: New
More
£57,03
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: M2211P
Details
-
- Construction Year to: 08/1989
- Fitting Position: Front Axle
- Brake Disc Type: solid
- Number of Holes: 5
- Minimum thickness [mm]: 13
- Centering Diameter [mm]: 85
- Brake System: PERROT
- Height [mm]: 83
- Drilled: no
- Condition: New
More
£57,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: LVBE186Z
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Number of bores: 2
- Brake Disc Thickness [mm]: 16
- Minimum thickness [mm]: 14
- Centering Diameter [mm]: 85
- Height [mm]: 96
- Weight [kg]: 7,22
- Surface: Coated
- Condition: New
More
£64,39
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 103 products
Show the next items
- 1
- 2
- 3
- 4
- 5
