Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Puch G-Modell (W460) 230GE (460.238, 460.239) 125 hp Petrol
- Ignition coil Puch G-Modell (W460) 230GE (460.238, 460.239) 125 hp Petrol
- Ignition leads Puch G-Modell (W460) 230GE (460.238, 460.239) 125 hp Petrol
- Camshaft sensor Puch G-Modell (W460) 230GE (460.238, 460.239) 125 hp Petrol
- Crankshaft sensor Puch G-Modell (W460) 230GE (460.238, 460.239) 125 hp Petrol
- Distributor cap Puch G-Modell (W460) 230GE (460.238, 460.239) 125 hp Petrol
- Timing cover gasket Puch G-Modell (W460) 230GE (460.238, 460.239) 125 hp Petrol
- Distributor rotor Puch G-Modell (W460) 230GE (460.238, 460.239) 125 hp Petrol
- Distributor and parts Puch G-Modell (W460) 230GE (460.238, 460.239) 125 hp Petrol
- Ignition module Puch G-Modell (W460) 230GE (460.238, 460.239) 125 hp Petrol
- Plug, spark plug G-MODELL 230GE (460.238, 460.239) 125 hp Petrol
- Repair kit, distributor G-MODELL 230GE (460.238, 460.239) 125 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Spark plugs Puch G-Modell (W460) 230 GE (460.238, 460.239) 125 hp Petrol
Article №: 686S0033
Details
-
- Engine Code: M 102.981, M 102.998
- Vehicle type: <461.219>
- Construction Year from: 10/1989
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0057
Details
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, with taper gasket seat
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0318
Details
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990056
Details
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, with taper gasket seat
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990032
Details
-
- Engine Code: M 102.981, M 102.998
- Vehicle type: <461.219>
- Construction Year from: 10/1989
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8EH 188 704-261
CS8P-8
Details
-
- Engine Code: M 102.981
- TecDoc Engine Number: M 102.998, M 102.981
- Construction Year from: 10/1989
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
-
- TecDoc Engine Number: M 102.987, M 102.981
- Fuel Type: CNG/LPG
- Engine Code: M 102.981
- Construction Year to: 08/1985
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Thread Size: M14 x 1,25
- Tightening Torque [Nm]: 30
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0005
Details
-
- TecDoc Engine Number: M 102.987, M 102.981
- Construction Year from: 10/1989
-
- TecDoc Engine Number: M 102.987, M 102.981
- Construction Year from: 04/1982
- Construction Year to: 08/1985
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,8
- Spark Plug: 1 - Earthed Electrode
- Weight [kg]: 0,04
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE009/T10
S9YC, OE009
Details
- Product line: Powersport
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: M4/SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: S9YC
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Projection [mm]: 1,5
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0033P
Details
- Product line: Nickel
- Thread Length [mm]: 17,5
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Condition: New
More
£3,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: T20EP-U
D5
Details
-
- TecDoc Engine Number: M 102.987, M 102.981
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 17,5
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Removable SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 40
- alternative item: T20TT
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860035
Details
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Condition: New
More
£3,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 661
HR 7 D+, Blister N10 - HR 7 DC
Details
-
- TecDoc Engine Number: M 102.987, M 102.981
- Construction Year from: 10/1989
- Required quantity: 4
-
- TecDoc Engine Number: M 102.981
- Construction Year from: 04/1982
- Construction Year to: 08/1985
- Required quantity: 4
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 15
- Number of pins: 1
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: T20TT
T11
Details
-
- TecDoc Engine Number: M 102.987, M 102.981
- Required quantity: 4
- Product line: Nickel TT
- Thread Length [mm]: 17,5
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M14x1.25
- Connector type: Solid SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 40
- alternative item: IT20TT
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: UPT9
Details
-
- Required quantity: 4
- Alternatively
- Supplementary Info: ULTRA TITAN
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Quality/ Grade: Poly-V Tit
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Condition: New
More
£6,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-19990316
Details
- External Thread [mm]: 14
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Tightening angle [degrees]: 15
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CET9
Details
-
- Required quantity: 4
- Alternatively
- Product line: Aerovantage Spoiler
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1.25
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Ti Poly-V
- Technical Information Number: CET9
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£8,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: CCH9808
OE183, 9808
Details
-
- Required quantity: 4
- Alternatively
- Product line: Platinum CT
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 1,3
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat, Iridium Middle Electrode
- Thread Size: M14x1.25
- Connector type: SAE
- Packing Type: Box
- Quality/ Grade: Pt GE
- Technical Information Number: RS8WYPB5
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Packaging length [cm]: 9,5
- Packaging width [cm]: 2,1
- Packaging height [cm]: 2,1
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1,5
- Condition: New
More
£9,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860062
Details
-
- TecDoc Engine Number: M 102.987, M 102.981
- Required quantity: 4
- Fuel Type: CNG/LPG
- Product line: Iridium TT
- Thread Length [mm]: 17,5
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Platinum Middle Electrode
- Connector type: Solid SAE
- Tightening Torque [Nm]: 22
- Diameter [mm]: 14
- Weight [g]: 40
- Country Specific Design: Japan
- Gross Weight [g]: 43
- Condition: New
More
£12,38
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: IT20TT
Details
-
- TecDoc Engine Number: M 102.987, M 102.981
- Required quantity: 4
- Fuel Type: CNG/LPG
- Product line: Iridium TT
- Thread Length [mm]: 17,5
- Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode, Platinum mass electrode
- Thread Size: M14x1.25
- Diameter [mm]: 14
- Gross Weight [g]: 43
- alternative item: IT20TT
- Condition: New
More
£12,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3689
TR6IX
Details
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3,0
- Spanner Size: 16 mm
- Spark Plug: Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with taper gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Condition: New
More
£14,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: Z17
14 K-7 DU, 0001635700
Details
- Product line: ULTRA
- Thread Length [mm]: 17,5
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Thread Size: M14x1,25
- Connector type: SAE/M4
- Required quantity: 4
- Self-service suited packaging see parts list
- Technical Information Number: 14 K-7 DU
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: Z18
14 K-7 DU0, 0001635709
Details
- Product line: ULTRA
- Thread Length [mm]: 17,5
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with taper seat
- Required quantity: 4
- Self-service suited packaging see parts list
- Technical Information Number: 14 K-7 DU0
- Packaging length [cm]: 9
- Packaging height [cm]: 2
- Packaging width [cm]: 2
- Tightening torque from [Nm]: 10
- Tightening torque to [Nm]: 20
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 242 232 507
HR 78
Details
-
- TecDoc Engine Number: M 102.987, M 102.981
- Construction Year from: 10/1989
- Required quantity: 4
-
- TecDoc Engine Number: M 102.981
- Construction Year from: 04/1982
- Construction Year to: 08/1985
- Required quantity: 4
- Supplementary Info: Super 4
- Thread Length [mm]: 17,5
- Spark Position [mm]: 4
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 4
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 241 240 563
H 6 DC
Details
- Thread Length [mm]: 17,5
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 20
- Number of pins: 1
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 062110330312
T20EP-U
Details
- Spanner Size: 16 mm
- Thread Size: 14-,708"
- TecDoc Engine Number: M 102.987, M 102.981
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 36 products
