Car part
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
- Brake pads PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
- Brake caliper repair kit PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
- Brake caliper carrier PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
- Brake hose PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
- Master cylinder PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
- Guide sleeve kit, brake caliper PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
- Brake fluid PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
- Brake pad fitting kit PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
- Brake servo PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
- Brake pads and discs IMPIAN 1.6 (CF1S) 102 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Brake discs PROTON Impian Saloon 1.6 (CF1S) 102 hp Petrol
Article №: 08.7042.10
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Tightening Torque [Nm]: 108
- Drilled: no
- Condition: New
More
£ 17,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: V1341PR
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 17,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: V37-40001
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Brake Disc Hub Height [mm]: 31
- Packaging width [cm]: 28
- Packaging height [cm]: 9
- Packaging Depth [cm]: 28
- Drilled: no
- Condition: New
More
£ 17,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: V1341P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Drilled: no
- Condition: New
More
£ 18,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: M1610P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Drilled: no
- Condition: New
More
£ 18,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 215 572
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Height [mm]: 41
- Condition: New
More
£ 18,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 1815314840
Details
-
- Fitting Position: Rear Axle
- for model code: Impian
- Diameter [mm]: 260
- Brake Disc Type: solid
- Rim Hole Number: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Surface: Coated
- Net weight [kg]: 3,39
- Drilled: no
- Condition: New
More
£ 20,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: VKBD 90201 S2
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Number of bores: 2
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90,2
- Height [mm]: 41,1
- Surface: Coated
- Condition: New
More
£ 20,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: TX 70-82
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Weight [kg]: 7,2
- Surface: Painted
- Drilled: no
- Condition: New
More
£ 20,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BR 030 SA100
Details
-
- Fitting Position: Rear Axle
- Vehicle type: Impian
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Surface: Coated
- Colour: grey
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Drilled: no
- Condition: New
More
£ 20,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 6447.00
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Weight [kg]: 3,38
- Test Mark: K.B.A.: 61210
- Drilled: no
- Condition: New
More
£ 21,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: V1341PR
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 22,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 60538
Details
- Fitting Position: Front Axle
- Diameter [mm]: 233,7
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 64
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11,4
- Height [mm]: 45,3
- Tightening Torque [Nm]: 108
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 22,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: DP-511
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 90
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 41
- Tightening Torque [Nm]: 108
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 22,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: M1610PR
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 23,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: TX 70-74
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Construction Year from: 07/2005
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,8
- Weight [kg]: 10
- Surface: Painted
- Drilled: no
- Condition: New
More
£ 24,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 60-05-538
Details
- Fitting Position: Front Axle
- Diameter [mm]: 233,7
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 64
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11,4
- Height [mm]: 45,3
- Tightening Torque [Nm]: 108
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 24,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 61-05-511C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 90
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,5
- Height [mm]: 41
- Surface: Painted
- Tightening Torque [Nm]: 108
- Test Mark: ECE R90 APPROVED
- for OE number: MR249356
- Drilled: no
- Condition: New
More
£ 24,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 604840
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Thread Size: 12,5
- Condition: New
More
£ 24,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 60-05-538C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 233,7
- Brake Disc Type: solid
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 64
- Brake Disc Thickness [mm]: 13
- Minimum thickness [mm]: 11,4
- Height [mm]: 45,3
- Surface: Painted
- Tightening Torque [Nm]: 108
- Test Mark: ECE R90 APPROVED
- for OE number: MB699281
- Drilled: no
- Condition: New
More
£ 25,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 800-434C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260,0
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10,0
- Centering Diameter [mm]: 90,0
- Height [mm]: 41
- Surface: Painted
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£ 25,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 19-0731MAX
Details
-
- Fitting Position: Front Axle
- Construction Year from: 07/2005
- Product line: MAX
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,3
- Surface: Painted, Coated
- Technical Information Number: 98200 1039 0 1 PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 30
- Packaging width [cm]: 28,5
- Packaging height [cm]: 10
- Drilled: no
- Condition: New
More
£ 25,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 19-0733MAX
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 260
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 90
- Height [mm]: 41
- Weight [kg]: 3,5
- Surface: Painted
- Test Mark: E190R 0202C0190/0167
- Drilled: no
- Condition: New
More
£ 26,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: C35022ABE
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of Holes: 4
- Thickness [mm]: 24
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 69
- Height [mm]: 45,5
- Material: Grey Cast Iron
- Drilled: no
- Condition: New
More
£ 26,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: DI-522
Details
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Number of bores: 4
- Bolt Hole Circle Ø [mm]: 69
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Height [mm]: 45,5
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 26,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 161 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
