Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Porsche 944 Coupe 2.5S 190 hp Petrol
- Brake pads Porsche 944 Coupe 2.5S 190 hp Petrol
- Brake caliper Porsche 944 Coupe 2.5S 190 hp Petrol
- Drum brake Porsche 944 Coupe 2.5S 190 hp Petrol
- ABS sensor Porsche 944 Coupe 2.5S 190 hp Petrol
- Brake caliper repair kit Porsche 944 Coupe 2.5S 190 hp Petrol
- Handbrake Porsche 944 Coupe 2.5S 190 hp Petrol
- Brake pad wear sensor Porsche 944 Coupe 2.5S 190 hp Petrol
- Brake shoes Porsche 944 Coupe 2.5S 190 hp Petrol
- Brake hose Porsche 944 Coupe 2.5S 190 hp Petrol
- Master cylinder 944 2.5S 190 hp Petrol
- Brake fluid 944 2.5S 190 hp Petrol
- Handbrake shoes 944 2.5S 190 hp Petrol
- Brake servo 944 2.5S 190 hp Petrol
- Accessory kit, brake shoes 944 2.5S 190 hp Petrol
- Brake light switch 944 2.5S 190 hp Petrol
- Brake caliper piston 944 2.5S 190 hp Petrol
- Control unit, brake / driving dynamics 944 2.5S 190 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Brake discs Porsche 944 Coupe 2.5 S 190 hp Petrol
Article №: 82B1236
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 289
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Construction Year to: 08/1987
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 19,9
- Minimum thickness [mm]: 18,6
- Centering Diameter [mm]: 102,8
- Inner Diameter [mm]: 180
- Height [mm]: 71,2
- Surface: Uncoated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0023378
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 289
- Brake Disc Type: Vented
- Number of Holes: 5/10
- Construction Year to: 08/1987
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 19,9
- Minimum thickness [mm]: 18,6
- Centering Diameter [mm]: 102,8
- Inner Diameter [mm]: 180
- Height [mm]: 71,2
- Surface: Uncoated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 15821
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 08/1986
- Diameter [mm]: 289
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 19,9
- Minimum thickness [mm]: 18,7
- Centering Diameter [mm]: 103
- Hub Diameter [mm]: 167
- Height [mm]: 71
- Weight [kg]: 5,64
- Surface: Coated
- Drilled: no
- Condition: New
More
£29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2692
Details
-
- Fitting Position: Front Axle
- Construction Year to: 10/1986
- Brake System: Teves
- for model code: S
- Diameter [mm]: 283
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20,5
- Minimum thickness [mm]: 19,1
- Centering Diameter [mm]: 107
- Height [mm]: 35
- Surface: Oiled
- Test Mark: E1 90R-02C0074/0858
- Drilled: no
- Condition: New
More
£31,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0120-0104.1
Details
-
- Construction Year from: 01/1987
- Fitting Position: Rear Axle
- Diameter [mm]: 289,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Brake Disc Thickness [mm]: 20,0
- Minimum thickness [mm]: 18,6
- Centering Diameter [mm]: 103,0
- Inner Diameter [mm]: 180,0
- Height [mm]: 100
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Bore Diameter [mm]: 15,4
- Drilled: no
- Condition: New
More
£98,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0121-0112.1
Details
-
- Construction Year from: 01/1987
- Fitting Position: Front Axle
- Diameter [mm]: 282,5
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Brake Disc Thickness [mm]: 20,5
- Minimum thickness [mm]: 19,0
- Centering Diameter [mm]: 103,0
- Inner Diameter [mm]: 155,0
- Height [mm]: 74,2
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115/0174
- Bore Diameter [mm]: 15,4
- Drilled: no
- Condition: New
More
£108,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 460.1511.52
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 12/1986
- Product line: SPORT COAT Z
- Diameter [mm]: 289
- Brake Disc Type: internally vented, Perforated
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,6
- Centering Diameter [mm]: 103
- Height [mm]: 71
- Weight [kg]: 5,7
- Surface: Coated
- Test Mark: ohne ABE
- Drilled: yes
- Condition: New
More
Article №: BS-8966C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 289
- Brake Disc Type: Vented
- Construction Year from: 01/1987
- Hole Arrangement/Number: 5/10
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,6
- Centering Diameter [mm]: 103
- Height [mm]: 100
- Surface: Coated
- Drilled: no
- Condition: New
More
£46,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 15941
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20,4
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 103
- Hub Diameter [mm]: 166
- Height [mm]: 74,3
- Weight [kg]: 5,82
- Drilled: no
- Condition: New
More
£47,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 17553
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 09/1986
- Diameter [mm]: 289
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,6
- Centering Diameter [mm]: 103
- Hub Diameter [mm]: 169
- Height [mm]: 100
- Weight [kg]: 6,08
- Surface: Coated
- Drilled: no
- Condition: New
More
£50,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BS-8966
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 289
- Brake Disc Type: Vented
- Construction Year from: 01/1987
- Hole Arrangement/Number: 5/10
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 103
- Height [mm]: 100
- Drilled: no
- Condition: New
More
£57,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 92021200
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 08/1987
- Diameter [mm]: 289
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,7
- Centering Diameter [mm]: 102,8
- Inner Diameter [mm]: 180
- Height [mm]: 71,2
- Weight [kg]: 5,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 16
- Drilled: no
- Condition: New
More
£67,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MDC1090
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 08/1987
- Diameter [mm]: 289
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/10
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,7
- Centering Diameter [mm]: 102,8
- Inner Diameter [mm]: 180
- Height [mm]: 71,2
- Weight [kg]: 5,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 16
- Drilled: no
- Condition: New
More
£84,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 92040100
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 09/1987
- Diameter [mm]: 289
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/10
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,6
- Centering Diameter [mm]: 103
- Height [mm]: 100
- Weight [kg]: 6
- Technical Information Number: 98200 0401 0 1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 29,8
- Packaging width [cm]: 29,8
- Packaging height [cm]: 21,5
- Drilled: no
- Condition: New
More
£89,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 09.5783.10
Details
- Product line: Prime
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20,4
- Minimum thickness [mm]: 19,1
- Centering Diameter [mm]: 103
- Height [mm]: 74
- Tightening Torque [Nm]: 130
- Machining: High-carbon
- Drilled: no
- Condition: New
More
£92,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 24.0120-0167.1
Details
- Diameter [mm]: 282,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Brake Disc Thickness [mm]: 20,4
- Minimum thickness [mm]: 19,1
- Centering Diameter [mm]: 103,0
- Inner Diameter [mm]: 155,0
- Height [mm]: 74,1
- Machining: Alloyed/High-carbon
- Bore Diameter [mm]: 15,5
- Drilled: no
- Condition: New
More
£95,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 8DD 355 101-561
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/09
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20,5
- Minimum thickness [mm]: 19,1
- Centering Diameter [mm]: 103
- Height [mm]: 74,2
- Weight [kg]: 5,8
- Technical Information Number: 52603
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- Condition: New
More
£96,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: DDF616-1
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20.4
- Minimum thickness [mm]: 19.1
- Centering Diameter [mm]: 103
- Height [mm]: 74,1
- Weight [kg]: 6,02
- Tightening Torque [Nm]: 130
- Drilled: no
- Condition: New
More
£99,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BDC4827
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20,4
- Minimum thickness [mm]: 19,1
- Centering Diameter [mm]: 103
- Height [mm]: 74,1
- Drilled: no
- Condition: New
More
£100,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: BG2723
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 10/1986
- Brake System: Teves
- for model code: S
- Diameter [mm]: 289
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 19,9
- Minimum thickness [mm]: 18,7
- Centering Diameter [mm]: 102,8
- Height [mm]: 71
- Drilled: no
- Condition: New
More
£103,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: DDF314-1
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 289
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18.7
- Centering Diameter [mm]: 103
- Height [mm]: 71
- Weight [kg]: 6,23
- Drilled: no
- Condition: New
More
£112,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 460.1517.52
Details
-
- Fitting Position: Rear Axle
- Construction Year from: 01/1987
- Product line: SPORT COAT Z
- Diameter [mm]: 289
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,6
- Centering Diameter [mm]: 103
- Height [mm]: 100
- Weight [kg]: 6,4
- Surface: Coated
- Test Mark: ohne ABE
- Drilled: yes
- Condition: New
More
£119,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 460.1511.20
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 12/1986
- Product line: COAT Z
- Diameter [mm]: 289
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 10/5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,6
- Centering Diameter [mm]: 103
- Height [mm]: 71
- Weight [kg]: 5,7
- Surface: Coated
- Drilled: no
- Condition: New
More
£135,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 92040000
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/09
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20,5
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 103
- Inner Diameter [mm]: 157
- Height [mm]: 74,2
- Weight [kg]: 5,8
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 29,3
- Packaging width [cm]: 29,3
- Packaging height [cm]: 16,5
- Drilled: no
- Condition: New
More
£136,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 8DD 355 100-441
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 08/1987
- Diameter [mm]: 289
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/10
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,6
- Centering Diameter [mm]: 103
- Height [mm]: 71
- Weight [kg]: 5,72
- Technical Information Number: 52612
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- Condition: New
More
£137,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Showing 25 out of 34 products
