Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Porsche 914 1.8 86 hp Petrol
- Brake pads Porsche 914 1.8 86 hp Petrol
- Brake caliper Porsche 914 1.8 86 hp Petrol
- Brake caliper repair kit Porsche 914 1.8 86 hp Petrol
- Brake hose Porsche 914 1.8 86 hp Petrol
- Master cylinder Porsche 914 1.8 86 hp Petrol
- Brake fluid Porsche 914 1.8 86 hp Petrol
- Brake pad fitting kit Porsche 914 1.8 86 hp Petrol
- Brake light switch Porsche 914 1.8 86 hp Petrol
- Brake caliper piston Porsche 914 1.8 86 hp Petrol
- Brake pipe 914 1.8 86 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Brake discs Porsche 914 1.8 86 hp Petrol
Article №: V45-80004
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 126
- Brake Disc Thickness [mm]: 20,4
- Minimum thickness [mm]: 19,1
- Centering Diameter [mm]: 107
- Height [mm]: 35,2
- Weight [kg]: 4,9
- Brake Disc Hub Height [mm]: 14,5
- Packaging width [cm]: 28,2
- Packaging height [cm]: 3,52
- Packaging Depth [cm]: 28,2
- Drilled: no
- Condition: New
More
£24,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 460.1007.20
Details
- Product line: COAT Z
- Fitting Position: Rear Axle
- Diameter [mm]: 282
- Brake Disc Type: solid
- Rim Hole Number: 4
- Hole Arrangement/Number: 8/4
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 90
- Height [mm]: 80
- Weight [kg]: 4,5
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£64,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: DDF312-1
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20.4
- Minimum thickness [mm]: 19.1
- Centering Diameter [mm]: 107
- Height [mm]: 35,2
- Weight [kg]: 5,18
- Tightening Torque [Nm]: 130
- Drilled: no
- Condition: New
More
£98,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 561296J
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20,4
- Minimum thickness [mm]: 19,1
- Centering Diameter [mm]: 107
- Height [mm]: 35,2
- Weight [kg]: 10,36
- Surface: Oiled
- Tightening Torque [Nm]: 130
- Version: J
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 30,5
- Packaging width [cm]: 30
- Packaging height [cm]: 8
- Drilled: no
- Condition: New
More
£102,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 460.1007.52
Details
- Product line: SPORT COAT Z
- Fitting Position: Rear Axle
- Diameter [mm]: 282
- Brake Disc Type: solid, Perforated
- Hole Arrangement/Number: 8/4
- Bolt Hole Circle Ø 1 [mm]: 130
- Thickness [mm]: 9,5
- Minimum thickness [mm]: 8
- Height [mm]: 79,5
- Weight [kg]: 4,5
- Surface: Coated
- Hub Bore Diameter [mm]: 90
- ABE No.: KBA 60934
- Drilled: yes
- Condition: New
More
You may also be interested in
Article №: 09.5782.10
Details
- Product line: Prime
- Diameter [mm]: 282
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20,4
- Minimum thickness [mm]: 19,1
- Centering Diameter [mm]: 107
- Height [mm]: 35
- Tightening Torque [Nm]: 130
- Machining: High-carbon
- Drilled: no
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0120-0103.1
Details
- Diameter [mm]: 282,5
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 126,0
- Brake Disc Thickness [mm]: 20,5
- Minimum thickness [mm]: 19,1
- Centering Diameter [mm]: 107,0
- Inner Diameter [mm]: 145,0
- Height [mm]: 35,3
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115/0416
- Bore Diameter [mm]: 8,4
- Drilled: no
- Condition: New
More
£49,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-4820C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282
- Brake Disc Type: Vented
- Hole Arrangement/Number: 5/5
- Brake Disc Thickness [mm]: 20,4
- Minimum thickness [mm]: 19,1
- Centering Diameter [mm]: 107,2
- Height [mm]: 35,2
- Surface: Coated
- Drilled: no
- Condition: New
More
Article №: 09.C877.11
Details
- Product line: Prime
- Diameter [mm]: 330
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 34
- Minimum thickness [mm]: 32
- Centering Diameter [mm]: 98
- Height [mm]: 69
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£91,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.6665.11
Details
- Product line: Prime
- Diameter [mm]: 299
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 98
- Height [mm]: 75
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£64,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.B970.1X
Details
- Product line: Xtra
- Diameter [mm]: 345
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28,5
- Centering Diameter [mm]: 68
- Height [mm]: 52
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£115,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.C881.11
Details
- Product line: Prime
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 32
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 85
- Height [mm]: 69
- Surface: Coated
- Tightening Torque [Nm]: 160
- Machining: High-carbon
- Drilled: no
- Condition: New
More
£70,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.C884.11
Details
- Product line: Prime
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Centering Diameter [mm]: 85
- Height [mm]: 74
- Surface: Coated
- Tightening Torque [Nm]: 160
- Machining: High-carbon
- Drilled: no
- Condition: New
More
£67,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.8998.11
Details
- Product line: Prime
- Diameter [mm]: 299
- Brake Disc Type: perforated/vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 98
- Height [mm]: 67
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: yes
- Condition: New
More
£64,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0122-0272.1
Details
- Diameter [mm]: 330,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Brake Disc Thickness [mm]: 21,9
- Minimum thickness [mm]: 20,0
- Centering Diameter [mm]: 68,0
- Inner Diameter [mm]: 147,7
- Height [mm]: 36
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115/0603
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£79,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.B970.11
Details
- Product line: Prime
- Diameter [mm]: 345
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 52
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£80,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 747
Details
- Diameter [mm]: 345
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 52,1
- Surface: Coated
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Condition: New
More
£62,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 100.3356.52
Details
- Product line: SPORT COAT Z
- Diameter [mm]: 345
- Brake Disc Type: internally vented, Perforated
- Rim Hole Number: 5
- Hole Arrangement/Number: 6/5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 52
- Weight [kg]: 11,10
- Surface: Coated
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Condition: New
More
£110,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0128-0149.1
Details
- Diameter [mm]: 330,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Brake Disc Thickness [mm]: 28,0
- Minimum thickness [mm]: 26,0
- Centering Diameter [mm]: 85,0
- Inner Diameter [mm]: 210,0
- Height [mm]: 73,5
- Surface: Coated
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0296/1083
- Bore Diameter [mm]: 15,4
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£100,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 28157
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 130
- Thickness [mm]: 74
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Centering Diameter [mm]: 85
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
£55,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 248
Details
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 31,9
- Minimum thickness [mm]: 30
- Centering Diameter [mm]: 84,7
- Height [mm]: 68,4
- Surface: Coated
- Machining: High-carbon
- Paired product: 0 986 479 250
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,5
- Drilled: no
- Condition: New
More
£72,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF4487S
Details
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Centering Diameter [mm]: 85
- Height [mm]: 73,5
- Surface: Painted
- Machining: High-carbon
- Thread Size: 15,4
- Colour: black
- Test Mark: E1 90R-02 C0226/0567
- Drum diameter [mm]: 210
- Drilled: no
- Condition: New
More
£63,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0132-0117.1
Details
- Diameter [mm]: 330,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Brake Disc Thickness [mm]: 32,0
- Minimum thickness [mm]: 30,0
- Centering Diameter [mm]: 85,0
- Inner Diameter [mm]: 174,0
- Height [mm]: 68,5
- Surface: Coated
- Machining: Alloyed/High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115/1017
- Paired product: 24.0132-0118.1
- Bore Diameter [mm]: 15,4
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£103,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 44039
Details
- Fitting Position: Front Axle
- Diameter [mm]: 345
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 52
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 68
- Surface: Coated
- Machining: High-carbon
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£56,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 36454
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 68
- Surface: Coated
- Number of mounting bores: 1
- for OE number: 8K0 615 601 C
- Observe service information
- old version
- Drilled: no
- Condition: New
More
£49,99
incl. 20% VAT, excl. delivery costs
In stock
Details
