PLYMOUTH Acclaim Saloon - Typ: 3.0
- Manuf. year (from - to): 09.1988 - 09.1995
- Car body type: Saloon
- Type of drive: Front-Wheel Drive
- Cylinder capacity (cc): 2972
- Cylinders: 6
- Engine type: Petrol Engine
- Power: 141
- ABS: without ABS
- Valves per combustion chamber: 2
- Fuel type: Petrol
- Fuel handling: Intake Manifold Injection/ Carburettor
- Catalyst: with three-way catalytic converter
PARTS PLYMOUTH Acclaim Saloon 3.0 141 hp Petrol Engine EFA 1988 - 1995
-
Bestsellers
-
Bearings
-
Body
-
Brakes
-
Damping
-
Drive shaft and cv joint
-
Electrics
-
Engine
-
Exhaust
-
Filters
-
Gaskets and sealing rings
-
Ignition and preheating
-
Oils and fluids
-
Sensors, relays, control units
-
Steering
-
Suspension
-
Wiper and washer system
Parts PLYMOUTH Acclaim Saloon 3.0 141 hp
-
Brake pads
-
Wheel hub
-
Wheel bearing
-
Track rod end
-
Ball joint
-
Cv boot
-
Oil drain plug gasket
-
Rocker cover gasket
-
Sump plug
-
Inner tie rod
-
Cv joint
-
Brake fluid
Bearings
Top
A-Z
-
Wheel bearing
Body
Top
A-Z
-
Headlights
-
Daytime running lights
-
Licence plate holder / bracket
Brakes
Top
A-Z
-
Brake discs
-
Brake pads
-
Brake hose
-
Brake fluid
Damping
Top
A-Z
-
Shock absorber
-
Top strut mount and bearing
Drive shaft and cv joint
Top
A-Z
-
Cv boot
-
Cv joint
Electrics
Top
A-Z
-
Manifold absolute pressure (MAP) sensor
-
Tyre pressure sensor (TPMS)
Engine
Top
A-Z
-
Rocker cover gasket
-
Head gasket
-
Valve stem seals
-
Ignition leads
-
Oil drain plug gasket
-
Sump plug
-
Crankshaft seal
-
Sump gasket
-
Camshaft seal
-
Manifold absolute pressure (MAP) sensor
-
Cylinder head gasket set
Exhaust
Top
A-Z
-
Lambda sensor
Filters
Top
A-Z
-
Oil filter
-
Air filter
-
Cabin filter
-
Fuel filter
-
Power steering filter
Gaskets and sealing rings
Top
A-Z
-
Rocker cover gasket
-
Head gasket
-
Valve stem seals
-
Oil drain plug gasket
-
Crankshaft seal
-
Sump gasket
-
Camshaft seal
-
Door seal
Ignition and preheating
Top
A-Z
-
Ignition leads
Oils and fluids
Top
A-Z
-
Brake fluid
-
Screenwash
Sensors, relays, control units
Top
A-Z
-
Manifold absolute pressure (MAP) sensor
-
Tyre pressure sensor (TPMS)
Steering
Top
A-Z
-
Track rod end
-
Inner tie rod
-
Ball joint
-
Power steering filter
-
Tie rod
Suspension
Top
A-Z
-
Wheel bearing
-
Anti-roll bar link
-
Track rod end
-
Ball joint
-
Wheel hub
-
Inner tie rod
-
Tyre pressure sensor (TPMS)
Wiper and washer system
Top
A-Z
-
Wiper blades
-
Screenwash
Top Car parts maker
Automotive products for PLYMOUTH Acclaim Saloon 3.0 1988 year, 141 hp
incl. 20% VAT, excl. delivery costs
- Construction Year to: 12/1990
- Filter type: Spin-on Filter
- Height [mm]: 94,0
- Thread Size: 3/4"-16UNF-2B
- Sealing Ring Diameter [mm]: 62,0
- Article number of the recommended special tool: OCS 1
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 76,4
- Diameter 2 [mm]: 71,0
- Valve type: Overflow Valve
- Tightening Torque [Nm]: 20
- Packaging height [cm]: 10,00
- Net Weight [g]: 312
- Packaging length [cm]: 8,0
- Packaging width [cm]: 8,00
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Silicone
- Chemical Properties: not solvent-bearing, Permanently elastic, hardening
- Colour: black
- Capacity [ml]: 70
- Temperature range from [°C]: 50
- Temperature range to [°C]: 320
- Packing Type: Tube
- only in connection with: 70-31415-00
- Supplementary Info: REINZOSIL
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Thread Size: M14x1,5x11
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article / Supplementary Info Info 2: without seal ring
- Alternative Repair Kit: 774.460
- Goods tariff number: 7318158066
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- TecDoc Engine Number: EFA
- Required quantity: 12
- Material: FPM (fluoride rubber)
- Inner Diameter 2 [mm]: 8
- Height 1 [mm]: 9
- Height 2 [mm]: 13
- Diameter [mm]: 13
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Inner Diameter [mm]: 37
- Fitting Position: frontal sided
- Material: MVQ (silicone rubber)
- Swirl Type: Right-hand Twist
- Radial Shaft Seal Design: AS
- Dust Cover: with dust lip
- Height [mm]: 6
- Diameter [mm]: 50
- Goods tariff number: 8484200000
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Supplementary Article / Supplementary Info: without cylinder head gasket, with crankshaft seal, with valve stem seals
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: frontal sided
- Height [mm]: 8
- Inner Diameter [mm]: 35
- Material: FPM (fluoride rubber)
- Radial Shaft Seal Design: 827N DD
- Swirl Type: Alternating Twist
- Rotation Direction: Anticlockwise rotation
- directional
- Diameter [mm]: 50
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Aluminium
- Inner Diameter [mm]: 14
- Thickness [mm]: 2
- Shape: C Shape
- Diameter [mm]: 19
- Goods tariff number: 7616109090
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Filter type: Filter Insert
- Length [mm]: 272,5
- Width [mm]: 136
- Height [mm]: 41,9
- Height 1 [mm]: 42
- Width 1 [mm]: 135,5
- Seal Material: Foam/Rigid Foam
- Packaging length [cm]: 14,0
- Net Weight [g]: 141
- Packaging height [cm]: 27,50
- Packaging width [cm]: 4,40
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Required quantity: 2
- Goods tariff number: 8409919990
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Gasket Design: Fibre Composite
- TecDoc Engine Number: EFA
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
-
- TecDoc Engine Number: EFA
- Required quantity: 2
- Gasket Design: Graphite Composite
- Additionally required articles (article numbers): HBS402
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £ 130 within the UK
Fast delivery
