-
Bestsellers
-
Air conditioning
-
Body
-
Brakes
-
Clutch
-
Damping
-
Drive shaft and cv joint
-
Electrics
-
Engine
-
Engine cooling system
-
Exhaust
-
Filters
-
Fuel supply system
-
Gaskets and sealing rings
-
Gearbox
-
Heating and ventilation
-
Ignition and preheating
-
Oils and fluids
-
Propshafts and differentials
-
Sensors, relays, control units
-
Steering
-
Suspension
-
Wiper and washer system
Parts PIAGGIO Ape Classic Platform / Chassis 0.4 D 8 hp
-
Engine oil
-
Air filter
-
Fuel filter
-
Ignition coil
-
Cv boot
-
Engine mount
-
Gearbox oil and transmission fluid
-
Brake fluid
-
Wheel cylinder
Air conditioning
Top
A-Z
-
Heater matrix
Body
Top
A-Z
-
Headlights
-
Daytime running lights
-
Licence plate holder / bracket
Clutch
Top
A-Z
-
Clutch plate
Engine
Top
A-Z
-
Engine mount
-
Ignition coil
-
Air filter
-
Fuel filter
-
Ignition leads
-
Engine oil
-
Piston rings
-
Engine coolant
-
Piston
Exhaust
Top
A-Z
-
Lambda sensor
Fuel supply system
Top
A-Z
-
Fuel filter
Gaskets and sealing rings
Top
A-Z
-
Door seal
Gearbox
Top
A-Z
-
Gearbox oil and transmission fluid
Oils and fluids
Top
A-Z
Propshafts and differentials
Top
A-Z
-
Gearbox oil and transmission fluid
Sensors, relays, control units
Top
A-Z
-
Tyre pressure sensor (TPMS)
-
Starter relay
Suspension
Top
A-Z
Automotive products for PIAGGIO Ape Classic Platform / Chassis 0.4D 2006 year, 8 hp
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear Axle, Wheel Side
- Height [mm]: 146
- Inner Diameter 2 [mm]: 22, 86
- Joint Type: Universal Joint
- Supplementary Article / Supplementary Info Info 2: with clamps
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Capacity [litre]: 0,5
- DOT specification: DOT 4
- Weight [g]: 560
- Weight [kg]: 0,56
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Quantity: 4
- Colour: black
- Material: Rubber
- Fitting Position: Front and Rear
- Compatibility: Universal fit
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Oil Viscosity Classification SAE: 5W-40
- Capacity [litre]: 1
- Specification: API SN PLUS, ACEA C3
- Manufacturer recommendations: Fiat 9.55535-S2, BMW Longlife-04, MB 229.31, MB 229.51, MB 229.52
- Product line: Magnatec
- Version: C3
- Packing Type: Bottle
- Vehicle type: Car
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Filter type: Spin-on Filter
- Height [mm]: 158
- Diameter [mm]: 81
- Exit Thread Size: M16x1.5
- EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
- Gasket inside diameter [mm]: 61
- Gasket outside diameter [mm]: 70
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Packing Type: Bag
- Capacity [ml]: 5
- Weight [g]: 5
- Colour: transparent
- Chemical Properties: Long-term Protection, high corrosion protection, Heat-resistant, Water-repellent, Saltwater-Resistant, not metalliferous, Silicon-free
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Colour: white
- Packing Type: Tube
- Contents [g]: 100
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Packing Type: Blister Pack, Bag
- Capacity [ml]: 400
- Quantity Unit: Millilitre
- Colour: black
- Chemical Properties: hardening, High-module
- Processing time [minutes]: 20
- Tightening Torque [N/mm²]: 7,5
- Observe technical data
- Observe mounting information
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Quantity Unit: Kit
- Nominal Size [mm]: 4,5
- Pipe length [mm]: 500
- Material: POM (Polyoxymethylene), Polyamid 6, EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article / Supplementary Info Info 2: with connecting pipe
- Supplementary Article / Supplementary Info: with gaskets/seals
- Packing Type: Blister Pack
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Filter type: Spin-on Filter
- Height [mm]: 61,5
- Thread Size: M14x1,5
- Sealing Ring Diameter [mm]: 40,5
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 51,0
- Diameter 2 [mm]: 48,0
- Net Weight [g]: 141, 157
- Packaging length [cm]: 6,0
- Packaging width [cm]: 6,00, 6,03
- Packaging height [cm]: 6,99, 7,50
- Condition: New
Over 100 in stock

incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Rear Axle
- Inner Diameter 2 [mm]: 22, 86
- Length [mm]: 146
- Condition: New
Over 100 in stock
Best prices
Sparepartstore24.co.uk guarantees high-quality car parts at very attractive prices.
Save on shipping
Free shipping on orders over £ 140 within the UK
Fast delivery