Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
- Brake pads PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
- Brake caliper PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
- ABS sensor PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
- Brake caliper repair kit PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
- Handbrake PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
- Brake caliper carrier PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
- Brake hose PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
- Handbrake cable PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
- Vacuum pump PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
- Guide sleeve kit, brake caliper TRAVELLER 2.0 BlueHDi 144 hp Diesel
- Brake fluid TRAVELLER 2.0 BlueHDi 144 hp Diesel
- Brake pad fitting kit TRAVELLER 2.0 BlueHDi 144 hp Diesel
- Brake pads and discs TRAVELLER 2.0 BlueHDi 144 hp Diesel
- Brake light switch TRAVELLER 2.0 BlueHDi 144 hp Diesel
- Brake caliper piston TRAVELLER 2.0 BlueHDi 144 hp Diesel
- Vacuum hose TRAVELLER 2.0 BlueHDi 144 hp Diesel
- Brake disc bolts TRAVELLER 2.0 BlueHDi 144 hp Diesel
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs PEUGEOT Traveller (V_) 2.0 BlueHDi 144 hp Diesel
Article №: 24.0112-0212.1
Details
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without electric parking brake
- Diameter [mm]: 290,0
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108,0
- Brake Disc Thickness [mm]: 12,0
- Minimum thickness [mm]: 10,0
- Centering Diameter [mm]: 71,1
- Inner Diameter [mm]: 133,0
- Height [mm]: 35
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0165/0619
- Bore Diameter [mm]: 13,2
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
-56%
compared to RRP:
£ 85,32
£ 36,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADT343319
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 294
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Thickness [mm]: 35
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 71,1
- Weight [kg]: 5,78
- Surface: Coated
- Number of mounting bores: 3
- Observe service information
- TecDoc Engine Number: EHT (DW10FDDU340)
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£ 113,98
£ 37,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 08.C309.11
Details
-
- Fitting Position: Rear Axle
- Brake System: Bosch
- Product line: Prime
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 71
- Height [mm]: 35
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 38,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF2783C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 71
- Height [mm]: 35
- Weight [kg]: 5,9
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Drilled: no
- Condition: New
More
£ 38,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 104170
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 294
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Thickness [mm]: 35
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 71,1
- Weight [kg]: 5,78
- Surface: Coated
- Number of mounting bores: 3
- Observe service information
- TecDoc Engine Number: EHT (DW10FDDU340)
- Drilled: no
- Condition: New
More
-56%
compared to RRP:
£ 89,98
£ 39,28
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC6023
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 71
- Height [mm]: 35
- Drilled: no
- Condition: New
More
-56%
compared to RRP:
£ 90,17
£ 39,28
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 563298JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Number of Holes: 5
- Hole Arrangement/Number: 3
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Height [mm]: 35
- Weight [kg]: 5,9
- Surface: Coated
- Bore Diameter [mm]: 71
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Drilled: no
- Condition: New
More
£ 39,76
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92267303
Details
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without electric parking brake
- Product line: PRO
- Diameter [mm]: 290
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/08
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 71,1
- Inner Diameter [mm]: 133
- Height [mm]: 35
- Weight [kg]: 4,8
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,3
- Packaging width [cm]: 30,3
- Packaging height [cm]: 8,6
- Drilled: no
- Condition: New
More
-55%
compared to RRP:
£ 90,10
£ 39,76
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 610600C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of bores: 5
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Height [mm]: 35
- Surface: Painted
- for OE number: 1609583080
- Drilled: no
- Condition: New
More
£ 41,22
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.D420.11
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter [mm]: 294
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 71
- Height [mm]: 35
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£ 41,22
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BR-9559-C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 71,1
- Hub Diameter 1 [mm]: 71,1
- Hub Diameter 2 [mm]: 150
- Height [mm]: 35
- Surface: Coated
- Test Mark: R90
- Drilled: no
- Condition: New
More
£ 41,70
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD1537
Details
- Fitting Position: Rear Axle, 1st rear axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10
- Centering Diameter [mm]: 71,1
- Height [mm]: 35
- Surface: Painted
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 32,5
- Packaging width [cm]: 31
- Packaging height [cm]: 8
- Drilled: no
- Condition: New
More
£ 41,70
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 125-401
Details
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with electric parking brake
- Supplementary Info: PRO
- Diameter [mm]: 294
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 05/08
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 71
- Inner Diameter [mm]: 140
- Height [mm]: 35
- Weight [kg]: 5,8
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-72%
compared to RRP:
£ 156,43
£ 42,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 18577
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 71
- Hub Diameter [mm]: 150
- Height [mm]: 35
- Weight [kg]: 5,74
- Surface: Coated
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£ 155,18
£ 44,13
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 E32
Details
-
- Fitting Position: Rear Axle
- Brake Disc Type: internally vented
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 71,07
- Height [mm]: 35
- Surface: Coated
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,3
- Drilled: no
- Condition: New
More
£ 44,13
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 274733210
Details
-
- Vehicle Equipment: for vehicles without electric parking brake
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 71
- Condition: New
More
£ 44,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0023879
Details
- Fitting Position: Front Axle
- Diameter [mm]: 304
- Brake Disc Type: Vented
- Number of Holes: 5
- Hole Arrangement/Number: 05/08
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Centering Diameter [mm]: 71,1
- Inner Diameter [mm]: 137,0
- Height [mm]: 54
- Surface: Coated
- Machining: High-carbon
- Bore Diameter [mm]: 13,2
- Bore Diameter up to [mm]: 13,2
- Drilled: no
- Condition: New
More
-46%
compared to RRP:
£ 88,80
£ 47,52
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: C1029V
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 294
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 71
- Height [mm]: 35
- Condition: New
More
£ 51,40
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-4714
Details
- Fitting Position: Front Axle
- Diameter [mm]: 304
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Centering Diameter [mm]: 71
- Height [mm]: 53,9
- Surface: Painted
- Technical Information Number: 98200 2872 0 1 PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 33,5
- Packaging width [cm]: 32
- Packaging height [cm]: 13,5
- Drilled: no
- Condition: New
More
£ 56,25
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 61776.10
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 22
- Minimum thickness [mm]: 20
- Centering Diameter [mm]: 71
- Height [mm]: 35
- Weight [kg]: 5,8
- Drilled: no
- Condition: New
More
£ 57,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B1735P
Details
- Fitting Position: Front Axle
- Diameter [mm]: 304
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Centering Diameter [mm]: 71,1
- Height [mm]: 54
- Surface: Coated
- Machining: High-carbon
- Vehicle configuration line / variant: with bolts/screws
- Material: Grey Cast Iron
- Bore Diameter up to [mm]: 13,2
- Drilled: no
- Condition: New
More
£ 60,35
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130807
Details
- Fitting Position: Front Axle
- Diameter [mm]: 304
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/08
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Centering Diameter [mm]: 71
- Height [mm]: 53,9
- Condition: New
More
£ 62,07
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 60-02-2053C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 304
- Brake Disc Type: Vented
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 71
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Height [mm]: 54
- Surface: Painted
- for OE number: 9805260180
- Drilled: no
- Condition: New
More
£ 77,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 103621
Details
- Fitting Position: Front Axle
- Diameter [mm]: 304
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 71
- Inner Diameter [mm]: 137,0
- Height [mm]: 54
- Surface: Coated
- Bore Diameter [mm]: 13,2
- Condition: New
More
£ 82,93
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20943
Details
- Fitting Position: Front Axle
- Diameter [mm]: 304
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Centering Diameter [mm]: 71,1
- Height [mm]: 54
- Surface: Coated
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,2
- Drilled: no
- Condition: New
More
£ 102,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 168 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
