Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
- Turbo Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
- Exhaust silencer Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
- Exhaust pipe Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
- Exhaust hanger Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
- Exhaust manifold gasket Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
- Exhaust gasket Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
- Exhaust clamp Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
- Clamp, exhaust system Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
- Silencer rubber Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
- Front silencer 505 2.2 Turbo Injection 150 hp Petrol
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Exhaust hanger Peugeot 505 (551a) 2.2 Turbo Injection 150 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
PEUGEOT 505 (551A) 2.2 Turbo Injection year of manufacture 1986, 150 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Exhaust System: for rear muffler
- Material: Stainless Steel
- only in connection with: OE-Schalldämpfer
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- only in connection with: OE-Schalldämpfer
- Material: Stainless Steel
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Additionally required articles (article numbers): 213-921
- Material: Metal
- Surface: Zinc-coated
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front
- Exhaust System: for rear muffler
- only in connection with: OE-Schalldämpfer
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Exhaust System: for centre muffler
- only in connection with: OE-Schalldämpfer
- Fitting Position: Front
- for pipe diameter [mm]: 50
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Metal
- Surface: Zinc-coated
- only in connection with: OE-Schalldämpfer
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Additionally required articles (article numbers): 213-921
- Material: Metal
- Surface: Zinc-coated
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Similar to picture
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Height [mm]: 36
- Diameter [mm]: 9, 65
- Outer Diameter 2 [mm]: 14
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Rear
- Supplementary Article / Supplementary Info: with holder
- Material: Elastomer
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Exhaust System: for Exhaust Pipe
- only in connection with: OE-Schalldämpfer
- Fitting Position: Rear
- Diameter 1 [mm]: 60
- Condition: New
Over 100 in stock
