Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Peugeot 406 Saloon 3.0 204 hp Petrol
- Brake pads Peugeot 406 Saloon 3.0 204 hp Petrol
- Brake caliper Peugeot 406 Saloon 3.0 204 hp Petrol
- Drum brake Peugeot 406 Saloon 3.0 204 hp Petrol
- ABS sensor Peugeot 406 Saloon 3.0 204 hp Petrol
- Brake caliper repair kit Peugeot 406 Saloon 3.0 204 hp Petrol
- Handbrake Peugeot 406 Saloon 3.0 204 hp Petrol
- Brake caliper carrier Peugeot 406 Saloon 3.0 204 hp Petrol
- Brake shoes Peugeot 406 Saloon 3.0 204 hp Petrol
- Brake hose Peugeot 406 Saloon 3.0 204 hp Petrol
- Brake drum 406 3.0 204 hp Petrol
- Master cylinder 406 3.0 204 hp Petrol
- Handbrake cable 406 3.0 204 hp Petrol
- Guide sleeve kit, brake caliper 406 3.0 204 hp Petrol
- Brake fluid 406 3.0 204 hp Petrol
- Handbrake shoes 406 3.0 204 hp Petrol
- Brake pad fitting kit 406 3.0 204 hp Petrol
- Brake servo 406 3.0 204 hp Petrol
- Wheel cylinder 406 3.0 204 hp Petrol
- Accessory kit, brake shoes 406 3.0 204 hp Petrol
- Brake pads and discs 406 3.0 204 hp Petrol
- Brake disc bolts 406 3.0 204 hp Petrol
- Lateral and longitudinal acceleration sensor 406 3.0 204 hp Petrol
- Abs pump 406 3.0 204 hp Petrol
- Control unit, brake / driving dynamics 406 3.0 204 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Peugeot 406 Saloon 3.0 204 hp Petrol
Article №: MDC1063
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/07
- Wheel Bolt Bore Diameter [mm]: 13,2
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 71,1
- Inner Diameter [mm]: 185
- Height [mm]: 60
- Weight [kg]: 5,2
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 31,3
- Packaging width [cm]: 31,3
- Packaging height [cm]: 14
- Drilled: no
- Condition: New
More
£37,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MDC869
Details
- Fitting Position: Front Axle
- Diameter [mm]: 283
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 04/06
- Wheel Bolt Bore Diameter [mm]: 13,2
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 66
- Inner Diameter [mm]: 133,3
- Height [mm]: 28
- Weight [kg]: 6,8
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,3
- Packaging width [cm]: 30,3
- Packaging height [cm]: 8,6
- Drilled: no
- Condition: New
More
£44,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: 0 986 479 908
Details
- Fitting Position: Front Axle
- Diameter [mm]: 282,5
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 107,95
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Wheel Hub Diameter [mm]: 66,1
- Height [mm]: 28
- Surface: Oiled
- Bore Diameter up to [mm]: 13
- Drilled: no
- Condition: New
More
£50,99
incl. 20% VAT, excl. delivery costs
Not in stock
Details
You may also be interested in
Article №: 08.6931.11
Details
- Product line: Prime
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 71
- Height [mm]: 60
- Surface: Coated
- Tightening Torque [Nm]: 90
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 831
Details
- Diameter [mm]: 282,7
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 66,02
- Height [mm]: 28
- Surface: Oiled
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,2
- Drilled: no
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2873
Details
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 71
- Height [mm]: 60,5
- Surface: Oiled
- Test Mark: E1 90R-02C0967/2532
- Drilled: no
- Condition: New
More
£26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF2796
Details
- Diameter [mm]: 283
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 66
- Height [mm]: 28
- Surface: Painted
- Thread Size: 12,8
- Colour: black
- Test Mark: E190R-02C0185/0546
- Drilled: no
- Condition: New
More
£33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012401391-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 66
- Inner Diameter [mm]: 133,5
- Height [mm]: 28
- Required quantity: 2
- Bore Diameter [mm]: 13
- Net weight [kg]: 5,10
- Gross Weight [kg]: 5,10
- Drilled: no
- Condition: New
More
£27,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: P1211V
Details
- Diameter [mm]: 283
- Brake Disc Type: internally vented
- Number of Holes: 4
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 66
- Brake System: TRW
- Height [mm]: 28
- Drilled: no
- Condition: New
More
£39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 186533
Details
- Fitting Position: Front Axle
- Diameter [mm]: 283
- Brake Disc Type: Vented
- Rim Hole Number: 4
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 66
- Height [mm]: 28
- Weight [kg]: 14,33
- Number of mounting bores: 2
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with screw
- Drilled: no
- Condition: New
More
£54,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.6932.11
Details
- Product line: Prime
- Diameter [mm]: 260
- Brake Disc Type: internally vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 66
- Height [mm]: 28
- Surface: Coated
- Tightening Torque [Nm]: 90
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16647
Details
- Diameter [mm]: 290
- Brake Disc Type: solid
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 71
- Hub Diameter [mm]: 198
- Height [mm]: 60
- Weight [kg]: 5,18
- Drilled: no
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 830
Details
- Diameter [mm]: 260
- Brake Disc Type: Vented, internally vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 66,02
- Height [mm]: 28,2
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,2
- Drilled: no
- Condition: New
More
£33,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: P1191P
Details
- Diameter [mm]: 290
- Brake Disc Type: solid
- Number of Holes: 4
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 71
- Brake System: ATE
- Height [mm]: 60
- Drilled: no
- Condition: New
More
£34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG2871
Details
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 66
- Height [mm]: 29
- Surface: Oiled
- Test Mark: E1 90R-02C0289/1818
- Drilled: no
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DDF841
Details
- Product line: PREMIER
- Diameter [mm]: 283
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24,2
- Centering Diameter [mm]: 66
- Height [mm]: 28,2
- Weight [kg]: 14,42
- Surface: Oiled
- Tightening Torque [Nm]: 90
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Packing Type: Box
- Packaging length [cm]: 28,5
- Packaging width [cm]: 28,5
- Packaging height [cm]: 7,6
- Drilled: no
- Condition: New
More
£34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24.0124-0139.1
Details
- Diameter [mm]: 260,0
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Brake Disc Thickness [mm]: 24,0
- Minimum thickness [mm]: 22,0
- Centering Diameter [mm]: 66,0
- Inner Diameter [mm]: 133,5
- Height [mm]: 28
- Surface: Coated
- MAPP code available
- Test Mark: E1 90R-02C0118/0223
- Bore Diameter [mm]: 13,0
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£40,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: P1201V
Details
- Diameter [mm]: 260
- Brake Disc Type: internally vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Height [mm]: 28
- Drilled: no
- Condition: New
More
£34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 440.3114.20
Details
- Product line: COAT Z
- Diameter [mm]: 290
- Brake Disc Type: solid
- Rim Hole Number: 4
- Hole Arrangement/Number: 6/4
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 71
- Height [mm]: 60
- Weight [kg]: 5,2
- Surface: Coated
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£47,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 105-031
Details
- Product line: PRO
- Diameter [mm]: 260
- Brake Disc Type: Externally Vented
- Hole Arrangement/Number: 04/06
- Wheel Bolt Bore Diameter [mm]: 12,9
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 66
- Inner Diameter [mm]: 133,2
- Height [mm]: 28,2
- Weight [kg]: 5,5
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 16648
Details
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 66
- Hub Diameter [mm]: 145
- Height [mm]: 28
- Weight [kg]: 5,54
- Surface: Coated
- Drilled: no
- Condition: New
More
£36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF2782
Details
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 66
- Height [mm]: 28,4
- Surface: Painted
- Thread Size: 12,8
- Colour: black
- Drilled: no
- Condition: New
More
£34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 478 877
Details
- Diameter [mm]: 290,5
- Brake Disc Type: solid
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 71,07
- Height [mm]: 60
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,2
- Drilled: no
- Condition: New
More
£31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.9616.11
Details
- Product line: Prime
- Diameter [mm]: 283
- Brake Disc Type: internally vented
- Number of Holes: 4
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 66
- Height [mm]: 28
- Surface: Coated
- Tightening Torque [Nm]: 90
- Drilled: no
- Condition: New
More
£43,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 10679
Details
- Fitting Position: Front Axle
- Diameter [mm]: 283
- Brake Disc Type: internally vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 108
- Thickness [mm]: 28
- Brake Disc Thickness [mm]: 26
- Minimum thickness [mm]: 24
- Centering Diameter [mm]: 66
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
£32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
