Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Peugeot 205 Convertible 1.1 54 hp Petrol
- Ignition coil Peugeot 205 Convertible 1.1 54 hp Petrol
- Ignition leads Peugeot 205 Convertible 1.1 54 hp Petrol
- Camshaft sensor Peugeot 205 Convertible 1.1 54 hp Petrol
- Crankshaft sensor Peugeot 205 Convertible 1.1 54 hp Petrol
- Distributor cap Peugeot 205 Convertible 1.1 54 hp Petrol
- Distributor rotor Peugeot 205 Convertible 1.1 54 hp Petrol
- Distributor and parts Peugeot 205 Convertible 1.1 54 hp Petrol
- Ignition module Peugeot 205 Convertible 1.1 54 hp Petrol
- Vacuum cell, ignition distributor Peugeot 205 Convertible 1.1 54 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Wiper and washer system
Spark plugs Peugeot 205 Convertible 1.1 54 hp Petrol
Article №: 686S0003
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9, 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector
- Thread Size: M14 x 1,25
- Assy./disassy. by qualified personnel required!
- Condition: New
More
-49%
compared to RRP:
£3,70
£1,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0002
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
-37%
compared to RRP:
£3,70
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0030
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: Iridium Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
-50%
compared to RRP:
£16,10
£7,90
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0065
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£9,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0066
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£13,94
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990002
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9, 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode, Unscrewable SAE connector
- Thread Size: M14 x 1,25
- Assy./disassy. by qualified personnel required!
- Condition: New
More
-49%
compared to RRP:
£3,70
£1,85
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990001
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
-37%
compared to RRP:
£3,70
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 13424
FDR13WC1
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: with gasket seat, 1 - Earthed Electrode
- Construction Year to: 10/1990
- contains article number: 13422
- External Thread Size: M14 x 1,25
- Condition: New
More
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 666
FR 7 D+, Blister N01 - FR 7 DC
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0019
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Length [mm]: 76,4
- Height [mm]: 16
- Width [mm]: 19,6
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
-66%
compared to RRP:
£8,36
£2,78
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0002P
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£3,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0003P
Details
- Product line: Nickel
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M14 x 1,25
- Tightening Torque [Nm]: 25
- Resistor [kOhm]: 6
- Assy./disassy. by qualified personnel required!
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£3,12
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: U20FS-U
Details
- Product line: Nickel
- Thread Length [mm]: 12,7
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M10x1.0
- Connector type: Thread M4
- Tightening Torque [Nm]: 12
- Diameter [mm]: 10
- Weight [g]: 28,5
- alternative item: IUF22
- Condition: New
More
-10%
compared to RRP:
£3,61
£3,25
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 229 659
FR 8 D+, Blister N08 - FR 8 DC
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£3,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCF860001
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£4,04
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 13521
FDR13UC3
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: with gasket seat, 3 - Earthed Electrode
- Construction Year to: 10/1990
- contains article number: 13519
- External Thread Size: M14 x 1,25
- Condition: New
More
£4,18
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: OE034/T10
RC8YCL, OE034
Details
- Product line: Powersport
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Connector type: SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Cu-core GE
- Technical Information Number: RC8YCL
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,85
- Packaging width [cm]: 2,6
- Packaging height [cm]: 2,35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1,5
- Condition: New
More
-35%
compared to RRP:
£6,46
£4,18
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0003
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- External Thread [mm]: M14 x 1,25
- Product line: Q+, original equipment manufacturer quality
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode
- Length [mm]: 130
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£4,64
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0010
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Version: E7EC1
- Length [mm]: 126
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
-26%
compared to RRP:
£6,32
£4,64
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0012
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Version: VR7EC1
- Length [mm]: 126
- Height [mm]: 51
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
-21%
compared to RRP:
£6,49
£5,11
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0014
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,8
- Spark Plug: 3 - Earthed Electrode
- Weight [kg]: 0,048
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£5,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 232 501
FR 78
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Required quantity: 4
- Supplementary Info: Super 4
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 4
- Condition: New
More
£5,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990064
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£9,29
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0065P
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£12,37
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0066P
Details
-
- Construction Year from: 10/1987
- Construction Year to: 10/1990
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£18,55
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 53 products
Show the next items
- 1
- 2
- 3