Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Wheel hub Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Wheel bearing Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Top strut mount and bearing Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Anti-roll bar link Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Track rod end Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Engine mount Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Suspension kit Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Inner tie rod Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
- ABS sensor Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Ball joint KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Suspension bushes KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Shock absorber dust cover and bump stops KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Steering knuckle KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Anti-roll bar bushes KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Axle bushes KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Wheel bolts and wheel nuts KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Wheel spacers KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Steering rack boot KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Spring cap KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Abs ring KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Anti-roll bar stabiliser kit KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Nut, stub axle KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Shaft seal, wheel hub KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Subframe KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Steering mounting KADETT 1.3 (C08, C48, D08, D48) 68 hp Petrol
- Towbar / parts
- Wiper and washer system
Suspension kit Opel Kadett E CC 1.3 (C08, C48, D08, D48) 68 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
OPEL Kadett E CC (T85) 1.3 (C08, C48, D08, D48) year of manufacture 1985, 68 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Front Axle Left, Lower
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with ball joint, with fastening material, with rubber mount
- Required quantity: 2
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 2
- replacement in pairs recommended
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Thread Size: M12X1.5
- Control/Trailing Arm Type: for control arm
- Fitting Position: Rear Axle both sides, Front, inner, Lower
- Supplementary Article / Supplementary Info Info 2: with eccentric washer
- Required quantity: 2
- Diameter [mm]: 30
- Screw length below head [mm]: 85
- Quality/ Grade: 10.9
- Surface: Zinc-coated
- Thread Length [mm]: 46
- Spanner Size: 20
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right, Lower, Rear
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with mounting sleeves
- Inner Diameter [mm]: 16
- Diameter [mm]: 60
- Height [mm]: 58
- Required quantity: 1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Material: Steel
- Weight [kg]: 8,3
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 2
- replacement in pairs recommended
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [g]: 1145
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides, Lower
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with ball joint, with fastening material, with rubber mount
- Required quantity: 2
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right
- Paired product: 19217
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with ball joint, with fastening material, with rubber mount
- Required quantity: 2
- Condition: New
Over 100 in stock
Control arm repair kit Control Arm, with ball joint (FAG)
incl. 20% VAT, free delivery
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Material: Aluminium
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,302
- Thread Size: M12X1.5
- Control/Trailing Arm Type: for control arm
- Fitting Position: Rear Axle both sides, Rear, inner, Lower
- Supplementary Article / Supplementary Info Info 2: with eccentric washer
- Required quantity: 1
- Diameter [mm]: 30
- Screw length below head [mm]: 100
- Quality/ Grade: 10.9
- Surface: Zinc-coated
- Thread Length [mm]: 62
- Spanner Size: 20
- Condition: New
Over 100 in stock
