Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
-
Clutch
- Clutch kit Opel Insignia A Country Tourer 1.6 SIDI (47) 170 hp Petrol
- Clutch master cylinder Opel Insignia A Country Tourer 1.6 SIDI (47) 170 hp Petrol
- Central slave cylinder Opel Insignia A Country Tourer 1.6 SIDI (47) 170 hp Petrol
- Clutch release bearing Opel Insignia A Country Tourer 1.6 SIDI (47) 170 hp Petrol
- Clutch pipe Opel Insignia A Country Tourer 1.6 SIDI (47) 170 hp Petrol
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Clutch kit Opel Insignia A Country Tourer 1.6 SIDI (47) 170 hp Petrol
Article №: 834701
Details
-
- Construction Year from: 11/2014
- Construction Year to: 09/2015
- TecDoc Engine Number: B 16 SHL
- Transmission Code: M32WR
- Transmission Type: 6-Speed Manual Transmission
-
- Construction Year to: 09/2015
- Engine Code: A 16 XHT
- Transmission Code: M32WR
- Transmission Type: 6-Speed Manual Transmission
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: without sensor
- Supplementary Article / Supplementary Info: with central slave cylinder
- New Part
- Weight [kg]: 6,05, 6,7
- Bore Diameter [mm]: 34
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Condition: New
More
Article №: 624 3775 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 832789
Details
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: without central slave cylinder
- Transmission Type: 6-Speed Manual Transmission
- New Part
- Weight [kg]: 6,7
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
Article №: 624 3775 09
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: 832673
Details
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Supplementary Article / Supplementary Info: without central slave cylinder
- New Part
- Weight [kg]: 6,43
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Condition: New
More
You may also be interested in
Article №: 2290 601 076
Details
- Product line: ZMS Modul XTend plus CSC
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without screw set
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel
- Mounting Type: not pre-mounted
- only available in set
- Condition: New
More
Article №: 3000 990 573
Details
- Diameter [mm]: 240
- Number of Teeth: 20
- Alternative Repair Kit: 3000 970 145
- only available in set
- Condition: New
More
Article №: 3000 970 055
Details
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 20,1x22,3-20N
- Observe service information
- only available in set
- Condition: New
More
Article №: 837442
Details
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 18,1
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 32
- Tightening Torque [Nm]: 160
- only available in set
- Condition: New
More
£643,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 624 4002 33
Details
- Diameter [mm]: 240
- Supplementary Article / Supplementary Info: with central slave cylinder
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 625 3138 33
Details
- Diameter [mm]: 250
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with central slave cylinder
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Condition: New
More
Article №: 624 4002 09
Details
- Diameter [mm]: 240
- Adjustment: with automatic adjustment
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
More
Article №: JT1733
Details
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: without central slave cylinder
- Hub Profile: 20.2x23.2
- Multi-piece: two-piece
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Friction Lining Outer Diameter 1 [mm]: 240
- Condition: New
More
Article №: ADBP300104
Details
- Diameter [mm]: 250
- Number of Teeth: 23
- Supplementary Article / Supplementary Info: with synthetic grease
- Multi-piece: two-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
More
Inside the package:
- Clutch Pressure Plate 1
- Clutch Disc 1
- Grease 1
More
Article №: 2290 601 116
Details
- Diameter [mm]: 250
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
More
Article №: 3000 970 138
Details
- Diameter [mm]: 250
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Hub Profile: 23x26-23N
- Observe service information
- only available in set
- Condition: New
More
Article №: 3000 990 509
Details
- Diameter [mm]: 250
- Number of Teeth: 23
- Alternative Repair Kit: 3000 970 138
- only available in set
- Condition: New
More
£242,95
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3000 970 061
Details
- Product line: XTend
- Diameter [mm]: 240
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Observe service information
- only available in set
- Condition: New
More
Article №: 600 0316 00
Details
- Supplementary Article / Supplementary Info Info 2: with flywheel, with bolts/screws
- Supplementary Article / Supplementary Info: with central slave cylinder
- Number of mounting bores: 8
- Condition: New
More
£550,18
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 623 3563 09
Details
- Product line: RepSet
- Diameter [mm]: 230
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Check and replace dual-mass flywheel if necessary.
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Engine Features/Arrangement: for engines with dual-mass flywheel
- Condition: New
More
Article №: ADW1930110
Details
- Diameter [mm]: 241
- Number of Teeth: 20
- Supplementary Article / Supplementary Info: with central slave cylinder, with synthetic grease
- Multi-piece: three-piece
- Clutch: Replacement for self-adjusting clutch pressure plate
- Observe service information
- Condition: New
More
Article №: 837538
Details
- Number of Teeth: 20
- Supplementary Article / Supplementary Info Info 2: with screw set, with lock screw set, without sensor
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- New Part
- Weight [kg]: 16,82
- Number of mounting bores: 6
- only to be used within set
- Bore Diameter [mm]: 34
- Tightening Torque [Nm]: 80
- Number of mounting bores at central slave cylinder: 3
- Material: Aluminium
- Overall Length [mm]: 56,7
- only available in set
- Condition: New
More
£432,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 3000 990 525
Details
- Diameter [mm]: 228
- Number of Teeth: 20
- Alternative Repair Kit: 3000 950 943
- Condition: New
More
Article №: 2290 601 121
Details
- Diameter [mm]: 250
- Number of Teeth: 23
- Supplementary Article / Supplementary Info Info 2: with clutch disc
- Supplementary Article / Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws
- Mounting Type: not pre-mounted
- Condition: New
More
£378,32
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 622 3152 09
Details
- Product line: RepSet
- Diameter [mm]: 220
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Condition: New
More
