Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
- Brake pads Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
- Drum brake Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
- ABS sensor Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
- Brake caliper repair kit Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
- Handbrake Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
- Brake caliper carrier Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
- Brake shoes Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
- Brake hose Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
- Brake drum Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
- Handbrake cable CORSA 1.6 (F08, F68) 92 hp Petrol
- Guide sleeve kit, brake caliper CORSA 1.6 (F08, F68) 92 hp Petrol
- Brake pad fitting kit CORSA 1.6 (F08, F68) 92 hp Petrol
- Brake set, drum brakes CORSA 1.6 (F08, F68) 92 hp Petrol
- Accessory kit, brake shoes CORSA 1.6 (F08, F68) 92 hp Petrol
- Brake pads and discs CORSA 1.6 (F08, F68) 92 hp Petrol
- Brake light switch CORSA 1.6 (F08, F68) 92 hp Petrol
- Brake caliper piston CORSA 1.6 (F08, F68) 92 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Pipes and hoses
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Opel Corsa C 1.6 (F08, F68) 92 hp Petrol
Article №: 82B0080
Details
- Fitting Position: Front Axle
- Diameter [mm]: 260,6
- Brake Disc Type: Vented
- Number of Holes: 4/7
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Height [mm]: 41
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£15,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020082
Details
- Fitting Position: Front Axle
- Diameter [mm]: 260,6
- Brake Disc Type: Vented
- Number of Holes: 4/7
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Height [mm]: 41
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£15,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17213
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 264
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Thickness [mm]: 42
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65,5
- Weight [kg]: 3,8
- Surface: Coated
- Number of mounting bores: 1
- for OE number: 05 69 109
- Observe service information
- Drilled: no
- Condition: New
More
£20,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADW194311
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 264
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Thickness [mm]: 42
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65,5
- Weight [kg]: 3,8
- Surface: Coated
- Number of mounting bores: 1
- for OE number: 05 69 109
- Observe service information
- Drilled: no
- Condition: New
More
£24,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0080P
Details
- Fitting Position: Front Axle
- Diameter [mm]: 260,6
- Brake Disc Type: Vented
- Number of Holes: 4/7
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Height [mm]: 41
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£24,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 40 91 7213
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 264
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Thickness [mm]: 42,1
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 65,5
- Weight [kg]: 3,8
- Surface: Coated
- Number of mounting bores: 1
- for OE number: 05 69 109
- Drilled: no
- Condition: New
More
£26,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92111003
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/05
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 57
- Inner Diameter [mm]: 126,1
- Height [mm]: 40,6
- Weight [kg]: 3,1
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 24,8
- Packaging width [cm]: 24,8
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
£32,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 28167
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 42
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Weight [kg]: 6,58
- Surface: Coated
- Vehicle Identification Number (VIN) from: *********43033899
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£37,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 40 92 8167
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 42
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Weight [kg]: 6,58
- Surface: Coated
- Vehicle Identification Number (VIN) from: *********43033899
- Number of mounting bores: 1
- Drilled: no
- Condition: New
More
£38,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADG043203
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 42
- Brake Disc Thickness [mm]: 25
- Minimum thickness [mm]: 22
- Centering Diameter [mm]: 60
- Weight [kg]: 6,58
- Surface: Coated
- Vehicle Identification Number (VIN) from: *********43033899
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92111103
Details
- Product line: PRO
- Fitting Position: Front Axle
- Diameter [mm]: 260
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/07
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 60
- Inner Diameter [mm]: 125,8
- Height [mm]: 41,1
- Weight [kg]: 5,2
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
£39,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20076
Details
- Fitting Position: Front Axle
- Diameter [mm]: 260,6
- Brake Disc Type: Vented
- Number of Holes: 4/7
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Height [mm]: 41
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Drilled: no
- Condition: New
More
£91,03
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: MDC1519
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 240
- Brake Disc Type: solid
- Hole Arrangement/Number: 04/05
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 57
- Inner Diameter [mm]: 126,1
- Height [mm]: 40,6
- Weight [kg]: 3,1
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 24,8
- Packaging width [cm]: 24,8
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
£22,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
Article №: MDC1455C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 260
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 04/07
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 100
- Brake Disc Thickness [mm]: 24
- Minimum thickness [mm]: 22,4
- Centering Diameter [mm]: 60
- Inner Diameter [mm]: 125,8
- Height [mm]: 41,1
- Weight [kg]: 5,2
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 27,8
- Packaging width [cm]: 27,8
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
£37,49
incl. 20% VAT, excl. delivery costs
Not in stock
Details
