Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
-
Ignition and preheating
- Spark plugs Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
- Ignition coil Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
- Ignition leads Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
- Camshaft sensor Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
- Crankshaft sensor Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
- Distributor cap Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
- Distributor rotor Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
- Distributor and parts Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
- Ignition module Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
- Engine control unit (ECU) Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Spark plugs Opel Corsa B Van 1.2 (F08, W5L) 45 hp Petrol
Article №: 686S0011
Details
-
- Construction Year to: 08/2000
- Replace after km: 30000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0010
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0002
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0007
Details
-
- Construction Year to: 10/2001
- Spanner Size: 16 mm
- Replace after km: 60000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Fixed SAE connector
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 2
- Tightening angle [degrees]: 90
- Condition: New
More
£3,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0310
Details
-
- Construction Year to: 08/2000
- Replace after km: 30000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0069
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: New
More
£7,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0030
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Replace after km: 30000
- Required quantity: 4
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,7
- Spanner Size: 16 mm
- Spark Plug: Iridium Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£8,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0065
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£9,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0070
Details
-
- Construction Year to: 10/2001
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£11,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0066
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£14,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0306
Details
-
- Construction Year to: 10/2001
- Spanner Size: 16 mm
- Replace after km: 60000
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 5
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Thread Pitch [mm]: 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 2
- Tightening angle [degrees]: 90
- Condition: New
More
£15,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990010
Details
-
- Construction Year to: 08/2000
- Replace after km: 30000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£1,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKSP-1990001
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: Nickel Middle Electrode, Fixed SAE connector, 1 - Earthed Electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 242 235 666
FR 7 D+, Blister N01 - FR 7 DC
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£2,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0011P
Details
-
- Construction Year to: 08/2000
- Replace after km: 30000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£2,87
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 062709000001
Details
- Thread Length [mm]: 19
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, with resistor
- Thread Size: M14 x 1.25
- TecDoc Engine Number: C 12 NZ
- Condition: New
More
£2,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0002P
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£3,10
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0010P
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 6
- Spark Plug Head: Fixed SAE connector
- Condition: New
More
£3,20
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V99-75-0011
Details
-
- Construction Year to: 10/2001
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Product line: Q+, original equipment manufacturer quality
- Electrode Gap [mm]: 0,7
- Spark Plug: 1 - Earthed Electrode
- Length [mm]: 126
- Packaging width [cm]: 8,5
- Packaging height [cm]: 2,4
- Packaging Depth [cm]: 2,4
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: U20FS-U
Details
- Product line: Nickel
- Thread Length [mm]: 12,7
- Spanner Size: 16 mm
- Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
- Thread Size: M10x1.0
- Connector type: Thread M4
- Tightening Torque [Nm]: 12
- Diameter [mm]: 10
- Weight [g]: 28,5
- alternative item: IUF22
- Condition: New
More
£3,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0007P
Details
-
- Construction Year to: 08/2000
- Replace after km: 60000
- Required quantity: 4
- Product line: Nickel
- Thread Length [mm]: 19
- Spark Position [mm]: 5,7
- Electrode Gap [mm]: 1,0
- Spanner Size: 16 mm
- Spark Plug: Nickel-Copper Center Electrode, Nickel mass electrode
- Thread Size: M 14 x 1,25
- Resistor [kOhm]: 8
- Condition: New
More
£4,22
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 205 041
WR8DC04, 14R-8DU
Details
- Spark Plug: 1 - Earthed Electrode
- Engine Number to: 19341712
- Supplementary Article / Supplementary Info Info 2: Do not fit parts from different manufacturers!
- for OE number: 12 14 149
- Condition: New
More
£4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0065P
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£12,38
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0069P
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£12,81
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 686S0066P
Details
-
- Construction Year to: 08/2000
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 4
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Electrode Gap [mm]: 0,9
- Spanner Size: 16 mm
- Thread Size: M 14 x 1,25
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Condition: New
More
£18,58
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 82 products
Show the next items
- 1
- 2
- 3
- 4
