Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Opel Antara 07 2.2CDTi 166 hp Diesel
- Brake pads Opel Antara 07 2.2CDTi 166 hp Diesel
- Brake caliper Opel Antara 07 2.2CDTi 166 hp Diesel
- Drum brake Opel Antara 07 2.2CDTi 166 hp Diesel
- ABS sensor Opel Antara 07 2.2CDTi 166 hp Diesel
- Brake caliper repair kit Opel Antara 07 2.2CDTi 166 hp Diesel
- Handbrake Opel Antara 07 2.2CDTi 166 hp Diesel
- Brake disc back plate Opel Antara 07 2.2CDTi 166 hp Diesel
- Brake caliper carrier Opel Antara 07 2.2CDTi 166 hp Diesel
- Brake shoes Opel Antara 07 2.2CDTi 166 hp Diesel
- Brake hose ANTARA 2.2CDTi 166 hp Diesel
- Handbrake cable ANTARA 2.2CDTi 166 hp Diesel
- Guide sleeve kit, brake caliper ANTARA 2.2CDTi 166 hp Diesel
- Brake fluid ANTARA 2.2CDTi 166 hp Diesel
- Handbrake shoes ANTARA 2.2CDTi 166 hp Diesel
- Brake pad fitting kit ANTARA 2.2CDTi 166 hp Diesel
- Accessory kit, brake shoes ANTARA 2.2CDTi 166 hp Diesel
- Brake pads and discs ANTARA 2.2CDTi 166 hp Diesel
- Brake caliper piston ANTARA 2.2CDTi 166 hp Diesel
- Brake disc bolts ANTARA 2.2CDTi 166 hp Diesel
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Opel Antara 07 2.2 CDTi 166 hp Diesel
Article №: 82B0407
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29,2
- Centering Diameter [mm]: 70,8
- Height [mm]: 51,9
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£76,40
£25,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0721
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,7
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-54%
compared to RRP:
£70,50
£31,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022078
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29,2
- Centering Diameter [mm]: 70,8
- Height [mm]: 51,9
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£76,40
£25,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022871
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,7
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-54%
compared to RRP:
£70,50
£31,73
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 114-411
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,7
- Weight [kg]: 7,2
- Technical Information Number: 54655
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£112,42
£32,60
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V40-80004
Details
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,7
- Inner Diameter [mm]: 190
- Height [mm]: 71,6
- Weight [kg]: 7,068
- Brake Disc Hub Height [mm]: 51,7
- Packaging width [cm]: 30,4
- Packaging height [cm]: 7,5
- fulfils ECE norm: R90
- Drilled: no
- Condition: New
More
£33,57
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 114-401
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/06
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 70,7
- Inner Diameter [mm]: 154,4
- Height [mm]: 51,6
- Weight [kg]: 8,7
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£36,33
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17763
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 71
- Hub Diameter [mm]: 165
- Height [mm]: 51,6
- Weight [kg]: 8,5
- Surface: Coated
- Drilled: no
- Condition: New
More
-71%
compared to RRP:
£129,65
£36,79
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0721P
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,7
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£42,27
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2370
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,6
- Weight [kg]: 7,24
- Surface: Painted
- Drum diameter [mm]: 190
- Drilled: no
- Condition: New
More
£42,77
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 25712
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,6
- Drilled: no
- Condition: New
More
-62%
compared to RRP:
£114,67
£43,23
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562670CH
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 116
- Height [mm]: 70
- Weight [kg]: 14,78
- Tightening Torque [Nm]: 125
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 31
- Packaging width [cm]: 31,5
- Packaging height [cm]: 14
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£131,78
£43,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562670JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Hole Arrangement/Number: 5+1+1
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 70,7
- Height [mm]: 70
- Weight [kg]: 14,78
- Surface: Coated
- Tightening Torque [Nm]: 125
- Version: JC
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging width [cm]: 32
- Packaging height [cm]: 17,5
- Drilled: no
- Condition: New
More
£43,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2369
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 51,6
- Surface: Painted
- Machining: High-carbon
- Test Mark: E1 90R 02 C0176/0492
- Drilled: no
- Condition: New
More
£44,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012002091-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,7
- Inner Diameter [mm]: 190,0
- Height [mm]: 71,6
- Machining: Alloyed/High-carbon
- Required quantity: 2
- Bore Diameter [mm]: 12,8
- Net weight [kg]: 7,18
- Gross Weight [kg]: 7,20
- Drilled: no
- Condition: New
More
-30%
compared to RRP:
£64,42
£44,61
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BR-1214-C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 70,7
- Hub Diameter 1 [mm]: 71
- Hub Diameter 2 [mm]: 200
- Height [mm]: 71,7
- Surface: Coated
- Test Mark: R90
- Drilled: no
- Condition: New
More
£45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1263203800
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20
- Surface: Coated
- Drilled: no
- Condition: New
More
-32%
compared to RRP:
£71,79
£48,75
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17764
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 71
- Hub Diameter [mm]: 200
- Height [mm]: 71,7
- Weight [kg]: 7,2
- Surface: Coated
- Drilled: no
- Condition: New
More
-55%
compared to RRP:
£111,70
£49,67
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: O1025V
Details
- Fitting Position: Rear Axle
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,5
- Height [mm]: 71,9
- Drilled: no
- Condition: New
More
£50,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD2689
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 51,6
- Surface: Painted
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 33
- Packaging width [cm]: 31,5
- Packaging height [cm]: 12
- Drilled: no
- Condition: New
More
£50,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD3601HC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,7
- Surface: Oiled
- Drilled: no
- Condition: New
More
£51,05
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4763101100
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 29
- Height [mm]: 52
- Surface: Coated
- Machining: High-carbon
- Condition: New
More
-34%
compared to RRP:
£81,16
£52,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD3601
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,7
- Surface: Painted
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 35
- Packaging width [cm]: 33,5
- Packaging height [cm]: 17,5
- Drilled: no
- Condition: New
More
£52,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20597
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5/7
- Wheel Bolt Bore Diameter [mm]: 12,7
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,7
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£131,53
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20384
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5/6
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29,2
- Centering Diameter [mm]: 70,8
- Height [mm]: 51,6
- Surface: Coated
- Machining: High-carbon
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Drilled: no
- Condition: New
More
Showing 25 out of 108 products
Show the next items
- 1
- 2
- 3
- 4
- 5
