Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Opel Antara 07 3.0 258 hp Petrol
- Brake pads Opel Antara 07 3.0 258 hp Petrol
- Brake caliper Opel Antara 07 3.0 258 hp Petrol
- Drum brake Opel Antara 07 3.0 258 hp Petrol
- ABS sensor Opel Antara 07 3.0 258 hp Petrol
- Brake caliper repair kit Opel Antara 07 3.0 258 hp Petrol
- Handbrake Opel Antara 07 3.0 258 hp Petrol
- Brake disc back plate Opel Antara 07 3.0 258 hp Petrol
- Brake caliper carrier Opel Antara 07 3.0 258 hp Petrol
- Brake shoes Opel Antara 07 3.0 258 hp Petrol
- Brake hose ANTARA 3.0 258 hp Petrol
- Master cylinder ANTARA 3.0 258 hp Petrol
- Handbrake cable ANTARA 3.0 258 hp Petrol
- Guide sleeve kit, brake caliper ANTARA 3.0 258 hp Petrol
- Brake fluid ANTARA 3.0 258 hp Petrol
- Handbrake shoes ANTARA 3.0 258 hp Petrol
- Brake pad fitting kit ANTARA 3.0 258 hp Petrol
- Accessory kit, brake shoes ANTARA 3.0 258 hp Petrol
- Brake pads and discs ANTARA 3.0 258 hp Petrol
- Brake light switch ANTARA 3.0 258 hp Petrol
- Brake caliper piston ANTARA 3.0 258 hp Petrol
- Brake disc bolts ANTARA 3.0 258 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Opel Antara 07 3.0 258 hp Petrol
Article №: 60-0W-W12C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 71
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 27
- Height [mm]: 52
- Surface: Painted
- Tightening Torque [Nm]: 125
- Test Mark: ECE R90 APPROVED
- for OE number: 96625948
- Drilled: no
- Condition: New
More
£27,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BG4069
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,6
- Surface: Oiled
- Test Mark: E1 90R-02C0957/2557
- Drilled: no
- Condition: New
More
£44,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 615 523 6048
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year to: 12/2012
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,6
- Required quantity: 2
- Drilled: no
- Condition: New
More
£44,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 31430
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 115
- Thickness [mm]: 72
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70
- Weight [kg]: 7,45
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BDC5714
Details
-
- Fitting Position: Rear Axle
- Brake System: Akebono
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70
- Height [mm]: 71,6
- Drilled: no
- Condition: New
More
£45,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF6024
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,6
- Surface: Painted
- Thread Size: 12,7
- Colour: black
- Drum diameter [mm]: 190
- Drilled: no
- Condition: New
More
£46,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562670JC
Details
-
- Fitting Position: Rear Axle
- Paired product: 573386J
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Hole Arrangement/Number: 5+1+1
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 70,7
- Height [mm]: 70
- Weight [kg]: 14,78
- Surface: Coated
- Tightening Torque [Nm]: 125
- Version: JC
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging width [cm]: 32
- Packaging height [cm]: 17,5
- Drilled: no
- Condition: New
More
£46,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562670CH
Details
-
- Fitting Position: Rear Axle
- Paired product: 573386CH
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 116
- Height [mm]: 70
- Weight [kg]: 14,78
- Tightening Torque [Nm]: 125
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 31
- Packaging width [cm]: 31,5
- Packaging height [cm]: 14
- Drilled: no
- Condition: New
More
£47,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADG043127
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 115
- Thickness [mm]: 72
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70
- Weight [kg]: 7,45
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£47,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 128-821
Details
- Product line: PRO High Carbon
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 05/07
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,7
- Weight [kg]: 7,2
- Surface: Coated
- Machining: High-carbon
- Technical Information Number: 54655PRO_HC
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£47,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: O1026V
Details
-
- Construction Year from: 12/2010
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 70,5
- Height [mm]: 52,1
- Drilled: no
- Condition: New
More
£47,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 615 521 6047
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 27,5
- Centering Diameter [mm]: 70,7
- Height [mm]: 51,6
- Required quantity: 2
- Drilled: no
- Condition: New
More
£48,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562671JC
Details
-
- Fitting Position: Front Axle
- Paired product: 572570J
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 5
- Hole Arrangement/Number: 5+1
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 27
- Centering Diameter [mm]: 70,7
- Height [mm]: 52
- Weight [kg]: 17,39
- Surface: Coated
- Tightening Torque [Nm]: 125
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging width [cm]: 31
- Packaging height [cm]: 13
- Drilled: no
- Condition: New
More
£49,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADG043126
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 115
- Thickness [mm]: 52
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 70,7
- Weight [kg]: 8,72
- Surface: Coated
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Condition: New
More
£51,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: O1025V
Details
-
- Construction Year from: 12/2010
- Fitting Position: Rear Axle
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,5
- Height [mm]: 71,9
- Drilled: no
- Condition: New
More
£54,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD2689
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 51,6
- Surface: Painted
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 33
- Packaging width [cm]: 31,5
- Packaging height [cm]: 12
- Drilled: no
- Condition: New
More
£54,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD3601HC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,7
- Surface: Oiled
- Drilled: no
- Condition: New
More
£54,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 4763101100
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 29
- Height [mm]: 52
- Surface: Coated
- Machining: High-carbon
- Condition: New
More
£56,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: QD3601
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: internally vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 71,7
- Surface: Painted
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Packaging length [cm]: 35
- Packaging width [cm]: 33,5
- Packaging height [cm]: 17,5
- Drilled: no
- Condition: New
More
£56,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 61W05C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 71
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Height [mm]: 72
- Surface: Painted
- Tightening Torque [Nm]: 125
- for OE number: 96625873
- Drilled: no
- Condition: New
More
£59,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BR-1213-C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29
- Centering Diameter [mm]: 70,7
- Hub Diameter 1 [mm]: 70,7
- Hub Diameter 2 [mm]: 164
- Height [mm]: 51,6
- Surface: Coated
- Test Mark: R90
- Drilled: no
- Condition: New
More
£60,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 128313FCAL
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Centering Diameter [mm]: 71
- Height [mm]: 72
- Weight [kg]: 7,361
- Surface: Coated
- Bore Diameter up to [mm]: 12,8
- Condition: New
More
£61,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0894C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 29,0
- Minimum thickness [mm]: 27,4
- Centering Diameter [mm]: 70,7
- Height [mm]: 51,7
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£61,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 25713
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year from: 12/2010
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29
- Centering Diameter [mm]: 70,7
- Height [mm]: 51,5
- Drilled: no
- Condition: New
More
£62,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24012901011-PCS-MS
Details
- Fitting Position: Front Axle
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Number of Holes: 5
- Construction Year from: 12/2010
- Bolt Hole Circle Ø [mm]: 115
- Brake Disc Thickness [mm]: 29
- Minimum thickness [mm]: 28
- Centering Diameter [mm]: 71
- Inner Diameter [mm]: 155
- Height [mm]: 52
- Machining: Alloyed/High-carbon
- Required quantity: 2
- Bore Diameter [mm]: 13
- Net weight [kg]: 6,91
- Gross Weight [kg]: 7,60
- Drilled: no
- Condition: New
More
£62,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 191 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
