Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
-
Exhaust
- Lambda sensor Nissan Qashqai j10 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Turbo Nissan Qashqai j10 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Catalytic converter Nissan Qashqai j10 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust silencer Nissan Qashqai j10 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Mounting kit, exhaust system Nissan Qashqai j10 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust hanger Nissan Qashqai j10 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust manifold gasket Nissan Qashqai j10 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust gasket Nissan Qashqai j10 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Exhaust clamp Nissan Qashqai j10 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Middle silencer Nissan Qashqai j10 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Egr valve gasket QASHQAI 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Clamp, exhaust system QASHQAI 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Silencer rubber QASHQAI 1.6LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Lambda sensor Nissan Qashqai j10 1.6 LPG 117 hp Petrol/Liquified Petroleum Gas (LPG)
Article №: ADN17061
Details
-
- Emission Standard: Euro 5
- Vehicle Equipment: for vehicles with start-stop function
- Oxygen Sensor: Heated
- Fitting Position: after catalytic converter
- Cable Length [mm]: 450
- Number of circuits: 3
- Weight [kg]: 0,082
- Number of connectors: 4
- Voltage [V]: 12
- Spanner Size: 22
- Observe service information
- External Thread Size: M18x1,5
- Condition: New
More
£ 38,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 258 986 507
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Recommended change interval [km]: 160000
- Connector/Clamp: Connector may need adjustment
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ES11073-12B1
Details
-
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Finger probe, Heated
- Cable Length [mm]: 475
- Condition: New
More
£ 43,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 179591
Details
-
- Emission Standard: Euro 5
- Vehicle Equipment: for vehicles with start-stop function
- Oxygen Sensor: Heated
- Fitting Position: after catalytic converter
- Cable Length [mm]: 450
- Number of circuits: 3
- Weight [kg]: 0,082
- Number of connectors: 4
- Voltage [V]: 12
- Spanner Size: 22
- External Thread Size: M18x1,5
- Condition: New
More
£ 44,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADBP700029
Details
-
- Transmission Type: 5-Speed Manual Transmission
- Oxygen Sensor: Diagnostic Probe
- Oxygen Sensor: Heated
- Cable Length [mm]: 460
- Number of circuits: 4
- Weight [kg]: 0,086
- for OE number: 226A0-JA10C
- Spanner Size: 22
- Observe service information
- External Thread Size: M18x1,5
- Condition: New
More
£ 45,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V38-76-0007
Details
- Supplementary Info: Original VEMO Quality
- Oxygen Sensor: Heated, Thread pre-greased
- Number of pins: 4
- Length [mm]: 300
- Number of circuits: 4
- for OE number: 22690-ED000
- Number of connectors: 4
- not for emission standard: Euro 5
- Housing Colour: black
- Connector Shape: angular
- Line insulation design: with silicone-coated woven-fibre insulation
- Socket colour: black
- Packaging height [cm]: 9,2
- Condition: New
More
£ 48,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 175868
Details
-
- Transmission Type: 5-Speed Manual Transmission
- Oxygen Sensor: Diagnostic Probe
- Oxygen Sensor: Heated
- Cable Length [mm]: 460
- Number of circuits: 4
- Weight [kg]: 0,086
- for OE number: 226A0-JA10C
- Spanner Size: 22
- External Thread Size: M18x1,5
- Condition: New
More
£ 49,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 175783
Details
-
- Fitting Position: before catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Heated
- Cable Length [mm]: 250
- Number of circuits: 4
- Weight [kg]: 0,075
- Spanner Size: 22
- External Thread Size: M18x1,5
- Condition: New
More
£ 49,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: LBS00307
Details
-
- Fitting Position: after catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Heated, Finger probe
- Thread Size: M18X1.5mm
- Cable Length [mm]: 400
- Overall Length [mm]: 520
- Length [mm]: 490
- Number of circuits: 4
- Conductor Number: 4
- Recommended change interval [km]: 80000
- Weight [kg]: 0,13
- Quality: OE EQUIVALENT
- Number of connectors: 1
- Supplementary Article / Supplementary Info Info 2: without clip
- Version: A
- Housing Colour: black
- Connector Shape: rectangular
- Material: Metal
- Packaging length [cm]: 16
- Packaging width [cm]: 6,3
- Packaging height [cm]: 5,6
- Net weight [kg]: 0,1
- Number of pins: 4
- Line insulation design: with silicone insulation
- Condition: New
More
£ 52,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6PA 358 066-681
Details
-
- Oxygen Sensor: Diagnostic Probe
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Heated
- Fitting Position: after catalytic converter
- Cable Length [mm]: 400
- Number of pins: 4
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 53,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8845 14102
Details
-
- Vehicle Equipment: for vehicles without start-stop function
- Fitting Position: before catalytic converter
- Exhaust System: before catalytic converter
- Oxygen Sensor: Regulating Probe
- Overall Length [mm]: 420
- Number of circuits: 4
- Condition: New
More
£ 60,70
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DOX-1733
Details
-
- Oxygen Sensor: Regulating Probe
- not for emission standard: Euro 5
- Exhaust System: for pre-catalytic converter
- for OE number: 22690-ED000
- Oxygen Sensor: Heated, Finger probe
- Thread Size: M18x1,5, M18x1.5
- Cable Length [mm]: 300
- Number of pins: 4
- Quality: OE
- Weight [g]: 80
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 110
- Condition: New
More
£ 60,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 96308
Details
-
- TecDoc Engine Number: HR16DE
- Emission Standard: Euro 5
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: before catalytic converter
- Oxygen Sensor: Heated
- Length [mm]: 371
- Number of circuits: 4
- Condition: New
More
£ 64,94
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ESL-AU-002
Details
- Oxygen Sensor: Regulating Probe, Thread pre-greased
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Fabrication Number: ESL-AU-002
- Condition: New
More
£ 65,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1.998.106
Details
-
- Length [mm]: 271
- Fitting Position: before catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
- TecDoc Engine Number: HR16DE
- Oxygen Sensor: Regulating Probe
- Supplementary Info: Made in Italy - OE Equivalent
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 300
- Number of circuits: 4
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Condition: New
More
£ 67,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DOX-1732
Details
-
- Oxygen Sensor: Diagnostic Probe
- not for emission standard: Euro 5
- for OE number: 226A0-ET000
- Oxygen Sensor: Heated, Finger probe
- Thread Size: M18x1,5, M18x1.5
- Cable Length [mm]: 475
- Number of pins: 4
- Quality: OE
- Weight [g]: 90
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 120
- Condition: New
More
£ 68,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92492
Details
-
- TecDoc Engine Number: HR16DE
- Oxygen Sensor: Regulating Probe, Diagnostic Probe
- not for emission standard: Euro 5
- Oxygen Sensor: Heated
- Length [mm]: 471
- Number of circuits: 4
- Condition: New
More
£ 68,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: V38-76-0020
Details
-
- Fitting Position: Front
- Vehicle Equipment: for vehicles without start-stop function
- Supplementary Info: Original VEMO Quality
- Oxygen Sensor: Diagnostic Probe, Thread pre-greased
- Thread Size: M18 x 1,5, M18x1,5
- Fitting Position: after catalytic converter
- Length [mm]: 400
- Number of circuits: 4
- for OE number: 226A0-ET000
- Connector Shape: angular
- Line insulation design: with silicone-coated woven-fibre insulation
- Socket colour: black
- Packaging height [cm]: 9,2
- Condition: New
More
£ 70,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 368084
Details
-
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Diagnostic Probe
- Oxygen Sensor: Planar probe, Thread pre-greased, Heated
- Thread Size: M18x1,5
- Fitting Position: before catalytic converter
- Cable Length [mm]: 400
- Number of pins: 4
- Weight [kg]: 0,13
- Connector Shape: rectangular
- Switch Pressure [bar]: 4
- Condition: New
More
£ 71,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 368085
Details
-
- Vehicle Equipment: for vehicles without start-stop function
- Oxygen Sensor: Regulating Probe
- Oxygen Sensor: Planar probe, Thread pre-greased, Heated
- Thread Size: M18x1,5
- Fitting Position: before catalytic converter, after catalytic converter
- Cable Length [mm]: 300
- Number of pins: 4
- Weight [kg]: 0,12
- Connector Shape: rectangular
- Switch Pressure [bar]: 4
- Condition: New
More
£ 72,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1.998.178
Details
-
- Fitting Position: after catalytic converter
- Oxygen Sensor: Diagnostic Probe
- Vehicle Equipment: for vehicles with start-stop function
- TecDoc Engine Number: HR16DE
- Supplementary Info: Made in Italy - OE Equivalent
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 450
- Number of circuits: 4
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Condition: New
More
£ 81,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1.998.098
Details
-
- TecDoc Engine Number: HR16DE
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Vehicle Equipment: for vehicles without start-stop function
- Supplementary Info: Made in Italy - OE Equivalent
- Oxygen Sensor: Heated, Planar probe, Thread pre-greased
- Cable Length [mm]: 400
- Number of circuits: 4
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Condition: New
More
£ 84,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DOX-0559
Details
-
- Oxygen Sensor: Regulating Probe
- Exhaust System: for pre-catalytic converter
- for OE number: 22693-1KT0A
- Product line: Direct Fit
- Oxygen Sensor: Heated, Finger probe, Broadband oxygen sensor
- Thread Size: M18x1,5, M18x1.5
- Cable Length [mm]: 370
- Number of pins: 4
- for OE number: 226931JA0A
- Quality: OE
- Weight [g]: 97
- Manufacturer Restriction: DENSO
- Gross Weight [g]: 125
- Condition: New
More
£ 121,49
incl. 20% VAT, excl. delivery costs
In stock
Details
£ 68,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: YT-1753
Details
- Material: Chrome-Molybdenum Steel
- Spanner Size: 22
More
£ 4,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 150 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
