Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Nissan Patrol Y60 4.2Efi 4WD (Y60) 175 hp Petrol
- Brake pads Nissan Patrol Y60 4.2Efi 4WD (Y60) 175 hp Petrol
- Brake caliper Nissan Patrol Y60 4.2Efi 4WD (Y60) 175 hp Petrol
- Drum brake Nissan Patrol Y60 4.2Efi 4WD (Y60) 175 hp Petrol
- Brake caliper repair kit Nissan Patrol Y60 4.2Efi 4WD (Y60) 175 hp Petrol
- Handbrake Nissan Patrol Y60 4.2Efi 4WD (Y60) 175 hp Petrol
- Brake shoes Nissan Patrol Y60 4.2Efi 4WD (Y60) 175 hp Petrol
- Brake hose Nissan Patrol Y60 4.2Efi 4WD (Y60) 175 hp Petrol
- Master cylinder Nissan Patrol Y60 4.2Efi 4WD (Y60) 175 hp Petrol
- Handbrake cable Nissan Patrol Y60 4.2Efi 4WD (Y60) 175 hp Petrol
- Brake fluid PATROL 4.2Efi 4WD (Y60) 175 hp Petrol
- Handbrake shoes PATROL 4.2Efi 4WD (Y60) 175 hp Petrol
- Brake pad fitting kit PATROL 4.2Efi 4WD (Y60) 175 hp Petrol
- Wheel cylinder PATROL 4.2Efi 4WD (Y60) 175 hp Petrol
- Brake pads and discs PATROL 4.2Efi 4WD (Y60) 175 hp Petrol
- Performance brake discs PATROL 4.2Efi 4WD (Y60) 175 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Nissan Patrol Y60 4.2 Efi 4WD (Y60) 175 hp Petrol
Article №: 82B0737
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 6
- Wheel Bolt Bore Diameter [mm]: M12x1.25
- Bolt Hole Circle Ø [mm]: 137
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 104
- Height [mm]: 29
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-50%
compared to RRP:
£49,00
£24,50
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0430
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 316
- Brake Disc Type: Vented
- Number of Holes: 6/9
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 139,7
- Brake Disc Thickness [mm]: 18
- Centering Diameter [mm]: 111
- Height [mm]: 80
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-59%
compared to RRP:
£68,40
£27,51
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022887
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 6
- Wheel Bolt Bore Diameter [mm]: M12x1.25
- Bolt Hole Circle Ø [mm]: 137
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 104
- Height [mm]: 29
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-45%
compared to RRP:
£49,00
£26,65
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0022116
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 316
- Brake Disc Type: Vented
- Number of Holes: 6/9
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 139,7
- Brake Disc Thickness [mm]: 18
- Centering Diameter [mm]: 111
- Height [mm]: 80
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
-56%
compared to RRP:
£68,40
£30,09
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 0 986 479 U33
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 137
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 19
- Centering Diameter [mm]: 104
- Height [mm]: 29
- Surface: Oiled
- fulfils ECE norm: ECE-R90
- Drilled: no
- Condition: New
More
£34,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 101-191
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 06/06
- Bolt Hole Circle Ø [mm]: 137
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 104
- Height [mm]: 29
- Weight [kg]: 6,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-63%
compared to RRP:
£95,01
£34,82
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF1967
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 137
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 104
- Height [mm]: 29
- Surface: Painted
- Thread Size: M12 x 1.25
- Colour: black
- Drilled: no
- Condition: New
More
-69%
compared to RRP:
£114,18
£35,25
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2608
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 137
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 104
- Height [mm]: 29
- Weight [kg]: 6,6
- Surface: Painted
- Drilled: no
- Condition: New
More
£36,54
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 108519
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 315
- Brake Disc Type: internally vented
- Rim Hole Number: 6
- Bolt Hole Circle Ø [mm]: 140
- Thickness [mm]: 80
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 111
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£109,98
£36,97
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0247
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295,0
- Brake Disc Type: Vented
- Number of Holes: 6
- Brake Disc Thickness [mm]: 20,0
- Minimum thickness [mm]: 18,0
- Centering Diameter [mm]: 104,0
- Height [mm]: 29,0
- Test Mark: ECE-R90
- Drilled: no
- Condition: New
More
£38,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADN14378
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 315
- Brake Disc Type: internally vented
- Rim Hole Number: 6
- Bolt Hole Circle Ø [mm]: 140
- Thickness [mm]: 80
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 111
- Surface: Coated
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Condition: New
More
£38,69
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.A451.10
Details
- Product line: Prime
- Fitting Position: Rear Axle
- Diameter [mm]: 316
- Brake Disc Type: internally vented
- Number of Holes: 6
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 111
- Height [mm]: 80
- Tightening Torque [Nm]: 133
- Drilled: no
- Condition: New
More
£41,27
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 110-831
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 316
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 06/07
- Bolt Hole Circle Ø [mm]: 139,7
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 111
- Height [mm]: 80
- Weight [kg]: 7,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
-67%
compared to RRP:
£125,10
£41,27
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92035600
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 06/06
- Wheel Bolt Bore Diameter [mm]: 12
- Bolt Hole Circle Ø [mm]: 137
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 104
- Inner Diameter [mm]: 1
- Height [mm]: 29
- Weight [kg]: 6,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,3
- Packaging width [cm]: 30,3
- Packaging height [cm]: 8,6
- Drilled: no
- Condition: New
More
-62%
compared to RRP:
£109,75
£41,27
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0679
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 315,5
- Brake Disc Type: Vented
- Number of Holes: 6
- Brake Disc Thickness [mm]: 18,0
- Centering Diameter [mm]: 111,0
- Height [mm]: 80
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£42,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 09.5194.10
Details
-
- Fitting Position: Front Axle
- Construction Year to: 09/1991
- Product line: Prime
- Diameter [mm]: 295
- Brake Disc Type: internally vented
- Number of Holes: 6
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 104
- Height [mm]: 29
- Tightening Torque [Nm]: 133
- Drilled: no
- Condition: New
More
£44,71
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6926.10
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 315,7, 316
- Brake Disc Type: Vented
- Number of Holes: 6
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 111
- Height [mm]: 80
- Weight [kg]: 7,3
- Test Mark: K.B.A.: 61209
- Drilled: no
- Condition: New
More
£47,72
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-2408
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 316
- Brake Disc Type: Vented
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 140, 139,7
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 111
- Height [mm]: 80
- Weight [kg]: 7,43
- Colour: black
- Drilled: no
- Condition: New
More
£49,01
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: DF4814
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 316
- Brake Disc Type: Vented
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 139,7
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 111
- Height [mm]: 80
- Surface: Painted
- Thread Size: 12,8
- Colour: black
- Test Mark: E1 90R-02 C0176/0666
- Drilled: no
- Condition: New
More
-63%
compared to RRP:
£138,17
£50,30
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 92129900
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 316
- Brake Disc Type: internally vented
- Hole Arrangement/Number: 06/07
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 139,7
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 111
- Inner Diameter [mm]: 189,2
- Height [mm]: 80
- Weight [kg]: 7,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 32,8
- Packaging width [cm]: 32,8
- Packaging height [cm]: 17,9
- Drilled: no
- Condition: New
More
-58%
compared to RRP:
£125,59
£51,59
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 33 10 6464
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 315
- Brake Disc Type: internally vented
- Rim Hole Number: 6
- Bolt Hole Circle Ø [mm]: 139,7
- Thickness [mm]: 80
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 111
- Weight [kg]: 7,770
- Surface: Coated
- Number of mounting bores: 2
- Drilled: no
- Condition: New
More
-66%
compared to RRP:
£167,99
£55,89
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BS-7902C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 316
- Brake Disc Type: Vented
- Hole Arrangement/Number: 6/9
- Brake Disc Thickness [mm]: 18
- Minimum thickness [mm]: 16
- Centering Diameter [mm]: 110
- Height [mm]: 80
- Surface: Coated
- Drilled: no
- Condition: New
More
-52%
compared to RRP:
£128,32
£60,62
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20612
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Number of Holes: 6
- Wheel Bolt Bore Diameter [mm]: M12x1.25
- Bolt Hole Circle Ø [mm]: 137
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 104
- Height [mm]: 29
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
Article №: GCH20388
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 316
- Brake Disc Type: Vented
- Number of Holes: 6/9
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 139,7
- Brake Disc Thickness [mm]: 18
- Centering Diameter [mm]: 111
- Height [mm]: 80
- Surface: Coated
- Material: Grey Cast Iron
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Drilled: no
- Condition: New
More
Article №: BS-3370C
Details
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Construction Year to: 09/1991
- Hole Arrangement/Number: 6/6
- Brake Disc Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Centering Diameter [mm]: 104
- Height [mm]: 29
- Surface: Coated
- Drilled: no
- Condition: New
More
Showing 25 out of 38 products
