Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
-
Brakes
- Brake discs Nissan Almera Tino 1.8 114 hp Petrol
- Brake pads Nissan Almera Tino 1.8 114 hp Petrol
- Brake caliper Nissan Almera Tino 1.8 114 hp Petrol
- Drum brake Nissan Almera Tino 1.8 114 hp Petrol
- ABS sensor Nissan Almera Tino 1.8 114 hp Petrol
- Brake caliper repair kit Nissan Almera Tino 1.8 114 hp Petrol
- Handbrake Nissan Almera Tino 1.8 114 hp Petrol
- Brake caliper carrier Nissan Almera Tino 1.8 114 hp Petrol
- Brake shoes Nissan Almera Tino 1.8 114 hp Petrol
- Brake hose Nissan Almera Tino 1.8 114 hp Petrol
- Master cylinder ALMERA 1.8 114 hp Petrol
- Handbrake cable ALMERA 1.8 114 hp Petrol
- Guide sleeve kit, brake caliper ALMERA 1.8 114 hp Petrol
- Brake fluid ALMERA 1.8 114 hp Petrol
- Brake pad fitting kit ALMERA 1.8 114 hp Petrol
- Brake servo ALMERA 1.8 114 hp Petrol
- Brake pads and discs ALMERA 1.8 114 hp Petrol
- Brake light switch ALMERA 1.8 114 hp Petrol
- Abs ring ALMERA 1.8 114 hp Petrol
- Brake caliper piston ALMERA 1.8 114 hp Petrol
- Abs pump ALMERA 1.8 114 hp Petrol
- Control unit, brake / driving dynamics ALMERA 1.8 114 hp Petrol
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
- Suspension
- Towbar / parts
- Wiper and washer system
Brake discs Nissan Almera Tino 1.8 114 hp Petrol
Article №: 82B0107
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 277,5
- Brake Disc Type: solid
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 12,9
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10,1
- Centering Diameter [mm]: 68
- Height [mm]: 45
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 22,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 82B0111
Details
- Fitting Position: Front Axle
- Diameter [mm]: 279,8
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 49,2
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 40,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 36-15 523 0022
Details
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 12,5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 68
- Height [mm]: 45
- Required quantity: 2
- Drilled: no
- Condition: New
More
£ 23,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562264JC
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 45
- Weight [kg]: 9,14
- Surface: Coated
- Tightening Torque [Nm]: 108
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging width [cm]: 29,5
- Packaging height [cm]: 10,5
- Drilled: no
- Condition: New
More
£ 24,41
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 562264CH
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Centering Diameter [mm]: 68
- Height [mm]: 45
- Weight [kg]: 9,14
- Tightening Torque [Nm]: 108
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Packing Type: Box
- Packaging length [cm]: 29
- Packaging width [cm]: 29
- Packaging height [cm]: 11,2
- Drilled: no
- Condition: New
More
£ 24,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: N2004P
Details
-
- Construction Year to: 11/2005
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 68
- Height [mm]: 45
- Drilled: no
- Condition: New
More
£ 25,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: ADN143104
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 277
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 45
- Brake Disc Thickness [mm]: 9,5
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 68
- Weight [kg]: 4,390
- Surface: Coated
- Observe service information
- Drilled: no
- Condition: New
More
£ 26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 8DD 355 110-401
Details
- Product line: PRO
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Hole Arrangement/Number: 05/05
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 68
- Height [mm]: 45
- Weight [kg]: 4,2
- Surface: Coated
- Technical Information Number: 54257PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy./disassy. by qualified personnel required!
- Drilled: no
- Condition: New
More
£ 26,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 108459
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 277
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 45
- Brake Disc Thickness [mm]: 9,5
- Minimum thickness [mm]: 8,5
- Centering Diameter [mm]: 68
- Weight [kg]: 4,390
- Surface: Coated
- Observe service information
- Drilled: no
- Condition: New
More
£ 28,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: N2004P
Details
-
- Construction Year to: 11/2005
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 68
- Drilled: no
- Condition: New
More
£ 29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: BR-6777-C
Details
-
- Construction Year to: 05/2003
- Fitting Position: Rear Axle
- Diameter [mm]: 277,6
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 68
- Hub Diameter 1 [mm]: 68
- Hub Diameter 2 [mm]: 165
- Height [mm]: 45
- Surface: Coated
- Test Mark: R90
- Drilled: no
- Condition: New
More
£ 29,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0955
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114, 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Centering Diameter [mm]: 68
- Height [mm]: 45
- Drilled: no
- Condition: New
More
£ 30,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-04-015
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 11/2005
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 68
- Height [mm]: 45
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Article number of recommended accessories: 131-07-707, 131-07-708
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 231-04-015-2
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 11/2005
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 68
- Height [mm]: 45
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Article number of recommended accessories: 131-07-707, 131-07-708
- Assy./disassy. by qualified personnel required!
- Condition: New
More
£ 30,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 45512
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Construction Year to: 05/2003
- Brake Disc Thickness [mm]: 10
- Weight [kg]: 4,24
- Drilled: no
- Condition: New
More
£ 31,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 6054030
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278, 277,6
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Production Number: K6054030
- Condition: New
More
£ 31,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 17441
Details
- Product line: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8,4
- Centering Diameter [mm]: 68
- Hub Diameter [mm]: 165
- Height [mm]: 45
- Weight [kg]: 4,25
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 32,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 23-0762C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 277,7
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10,0
- Centering Diameter [mm]: 68,0
- Height [mm]: 45
- Surface: Painted
- Test Mark: ECE-R90, ECE R90 APPROVED
- Drilled: no
- Condition: New
More
£ 34,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 24011002851-PCS-MS
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Construction Year to: 11/2005
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9,0
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 154,0
- Height [mm]: 45
- Required quantity: 2
- Bore Diameter [mm]: 12,5
- Net weight [kg]: 4,18
- Gross Weight [kg]: 4,18
- Drilled: no
- Condition: New
More
£ 34,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: B130215
Details
-
- Fitting Position: Rear Axle
- Construction Year to: 11/2005
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 9,0
- Centering Diameter [mm]: 68
- Inner Diameter [mm]: 154,0
- Height [mm]: 45
- Bore Diameter [mm]: 12,5
- Drilled: no
- Condition: New
More
£ 36,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 61-01-156C
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 277,4
- Brake Disc Type: solid
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 68
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8
- Height [mm]: 45,3
- Surface: Painted
- Tightening Torque [Nm]: 108
- for OE number: 432064U103
- Drilled: no
- Condition: New
More
£ 38,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: SKBD-0020113
Details
- Fitting Position: Front Axle
- Diameter [mm]: 279,8
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 49,2
- Surface: Uncoated
- Machining: Untreated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 40,99
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 1032766
Details
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Number of Holes: 5
- Construction Year to: 11/2005
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 68
- Height [mm]: 45
- Surface: Coated
- Drilled: no
- Condition: New
More
£ 41,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: 19-0951
Details
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114
- Brake Disc Thickness [mm]: 28
- Minimum thickness [mm]: 26
- Centering Diameter [mm]: 68
- Height [mm]: 49
- Weight [kg]: 7,44
- Surface: Painted
- Drilled: no
- Condition: New
More
£ 43,49
incl. 20% VAT, excl. delivery costs
In stock
Details
Article №: GCH20187
Details
- Fitting Position: Front Axle
- Diameter [mm]: 279,8
- Brake Disc Type: Vented
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 114,3
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 68
- Height [mm]: 49,2
- Surface: Coated
- Material: Cast Iron
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Drilled: no
- Condition: New
More
£ 96,65
incl. 20% VAT, excl. delivery costs
In stock
Details
Showing 25 out of 217 products
Show the next items
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
