Car part
- Air conditioning
- Bearings
- Belts, chains, rollers
- Body
- Brakes
- Clutch
- Damping
- Drive shaft and cv joint
- Electrics
- Engine
- Engine cooling system
- Exhaust
- Filters
- Fuel supply system
- Gaskets and sealing rings
- Gearbox
- Heating and ventilation
- Ignition and preheating
- Interior
- Lighting
- Oils and fluids
- Pipes and hoses
- Propshafts and differentials
- Repair kits
- Sensors, relays, control units
- Steering
-
Suspension
- Suspension arm Nissan 350z Coupe 3.5 280 hp Petrol
- Wheel hub Nissan 350z Coupe 3.5 280 hp Petrol
- Wheel bearing Nissan 350z Coupe 3.5 280 hp Petrol
- Top strut mount and bearing Nissan 350z Coupe 3.5 280 hp Petrol
- Anti-roll bar link Nissan 350z Coupe 3.5 280 hp Petrol
- Track rod end Nissan 350z Coupe 3.5 280 hp Petrol
- Inner tie rod Nissan 350z Coupe 3.5 280 hp Petrol
- ABS sensor Nissan 350z Coupe 3.5 280 hp Petrol
- Ball joint Nissan 350z Coupe 3.5 280 hp Petrol
- Shock absorber dust cover and bump stops Nissan 350z Coupe 3.5 280 hp Petrol
- Suspension bushes 350Z 3.5 280 hp Petrol
- Tyre pressure sensor (TPMS) 350Z 3.5 280 hp Petrol
- Anti-roll bar bushes 350Z 3.5 280 hp Petrol
- Axle bushes 350Z 3.5 280 hp Petrol
- Wheel bolts and wheel nuts 350Z 3.5 280 hp Petrol
- Wheel spacers 350Z 3.5 280 hp Petrol
- Steering rack boot 350Z 3.5 280 hp Petrol
- Spring cap 350Z 3.5 280 hp Petrol
- Sway bar 350Z 3.5 280 hp Petrol
- Camber bolts 350Z 3.5 280 hp Petrol
- Wheel nuts 350Z 3.5 280 hp Petrol
- Anti-roll bar stabiliser kit 350Z 3.5 280 hp Petrol
- Nut, stub axle 350Z 3.5 280 hp Petrol
- Kingpin 350Z 3.5 280 hp Petrol
- Steering knuckle bushing 350Z 3.5 280 hp Petrol
- Repair kit, support- / steering link 350Z 3.5 280 hp Petrol
- Bush, stub axle pin 350Z 3.5 280 hp Petrol
- Wiper and washer system
Suspension kit Nissan 350z Coupe 3.5 280 hp Petrol
Unfortunately, this car part is unavailable. If you enter your email address or phone number, we will notify you as soon as it is back in stock.
NISSAN 350 Z (Z33) 3.5 year of manufacture 2003, 280 hp vehicle parts products
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Quantity Unit: Set
- Net weight [kg]: 9,00
- Gross Weight [kg]: 9,27
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Length [mm]: 108
- Thread Size: M14x1,5
- Packaging width [cm]: 2,8
- Packaging height [cm]: 2,8
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle Right, Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 2
- replacement in pairs recommended
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Weight [kg]: 0,085
- Packaging length [cm]: 9,0
- Packaging width [cm]: 2,2
- Packaging height [cm]: 2,2
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front axle both sides, Lower
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with ball joint, with fastening material, with rubber mount
- Cone Size [mm]: 16
- Mounting points diameter [mm]: 10
- Required quantity: 2
- Inner Diameter [mm]: 10
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Quantity Unit: Set
- Control/Trailing Arm Type: Control Arm
- Material: Cast Steel
- Required quantity: 1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle, Front Axle Right, Front Axle Left
- Quantity Unit: Set
- Net weight [kg]: 13,55
- Gross Weight [kg]: 14,62
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Quantity Unit: Set
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with coupling rod
- Required quantity: 1
- Condition: New
Over 100 in stock
incl. 20% VAT, excl. delivery costs
- Fitting Position: Front Axle
- Control/Trailing Arm Type: Control Arm
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Weight [kg]: 4,227
- Required quantity: 1
- Fitting Position: Rear Axle
- Material: PU (Polyurethane)
- Supplementary Article / Supplementary Info Info 2: with grease cap
- Control/Trailing Arm Type: for control arm, for trailing arm
- Number of Parts [parts]: 20
- Condition: New
Over 100 in stock
incl. 20% VAT, free delivery
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Quantity Unit: Set
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Condition: New
Over 100 in stock
Control arm repair kit Control Arm, with ball joint (FAG)
incl. 20% VAT, excl. delivery costs
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 20
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Material: Sheet Steel
- Condition: New
Over 100 in stock
